Suggested Questions/Answers :
It is recommended you read all this kind of situations
I have a HLT61765X/XAA. I was watching TV when it suddenly shut off. I tried turning it back on but the lamp faded on and then faded off with one green blinking on the far right (which is lamp, I believe) and one red blinking. I unscrewed the panel and removed the lamp, then put it back in. Now the lamp is lighting up but cannot make it all the way, but stays on. I then hear two buzzing noises every couple of seconds and eventually the lamp light fades away, with both green lights along with the
Samsung HLT6176S Television
Have a PT50DL-54J . Just changed the lamp and it will not start back up.Just a blinking green light. For the past while theTV has been displaying "replace lamp" but I couls still watch it. Then one day it would not turn on at all. Same green blinking light. I thought it was the bulb because of the error message saying so. I changed the bulb and its THE SAME PRWhat's wrong. Does it need to be reset somehow or something or am I SOL
Panasonic PT50LCX63 50" Rear Projection HDTV
Hi, i got samsung dlp tv m# HL-P5063W.i changed lamp,ballest,collerwheel,and lamp door cover sensor. but tv still doesnt come on.once you plug in the power cord green lamp sign blinks 35 times then cutts off and one time stand by red light blinks,then green lamp starts blinking again. lamp never gets come on. please help.
Seemed like it is a problem with the power supply circuit. Check the circuit where the power chord is connected internally to the TV. You should see capacitors. Check for swollen or leaking ones that may need replacing. Check also for burnt compo ...
Flat Panel Televisions
I have had ongoing lamp issues. I have purchased 2 new lamps, (Phillips) The new lamp won't light, but the old original lamp will light but is dim. Why would the old lamp light and new one won't. The old lamp takes about 15 green light flickers before coming on but does light. The new one, green light blinks till shuts off.
Hi,\012You old lamps were compromised due to long usages while the news lamps are defective. They may manufacturing defect. Please claim the new lamps to supplier then.\012\012Regards ,Jay ...
Panasonic PT-56LCX66 Television
I have a Mitsubishi wd-52525 HDTV... Picture went out and red indicator light came on. I shut off the tv and turned it back on and it made a crazy sound.. I shut it off and replaced the lamp. After installing the lamp I tried turning the tv back on and the green indicator light came on a blinked approximately 6-7 times and shut off and would repeat along with a crackling sound from the speakers. The green light is not continuous and you can not shut it off with out unplugging it from the wall. I
You must test the power supply inside. See if the fan is working, and thermostat is ok. test it.God bless you ...
Mitsubishi WD-52525 52" Rear Projection HDTV
I still have the problem on my 57in. Sony projection TV I clean the shields or lens on top of the three colored lamps when I removed the back cover the picture improved for a couple of days but it went back to all green and green arched horizontal lines I have sound but it goes black and the standby light blinks 5 times can this be fixed? Do any lamps have to be changed? If so how are they changed and where can they be purchased/
What is the Model Number listed on back of TV?? ...
Sony Projection Televisions
Hl72a650 Hi I have a Samsung hl72a650. Replaced lamp a year ago. Tv suddenly one day started to shut itself off and back on again. I have tried everything else I have researched online. Took lamp out and back in several times. When the tv comes on the picture is very bright and clear then suddenly the picture begins to loose color and shuts off and back on several times untill all 3 lights start blinking. I also started the tv with mute 182 power and selected options clear lamp, reset user setti
Color wheel issues replace light engine ...
Hello. my samsung HL61650A 61'' DLP tv is about 2.5 years old, and tonight it just shut off. tried to turn back on, got 2 'buzzing' sounds from the back, but it wouldn't turn on. unplugged, undid back cover, put blue switch to 'down', still no luck. now, it won't really even try to power on, and standby & lamp LED lights blink. do you think it is solely the Lamp that needs replaced? help!?
Samsung HL61A650C Television
I have a mitsubishi dlp WD-65733 and it went out on me a week ago. when I power it up i get only the green light above the timer. when i hit the reset button in the front i hear a click in the back and the green timer light starts blinking for about 30 seconds the it powers off. I do not get any lights above the status or lamp. i have replaced the bulb before about 1 1/2 years ago. could this be the bulp again? when i replaced it before i had an orange lamp light but not this time.
Hi,It seems problem in power supply board that got few electrolytic capacitors leaky and causing problem. It does not look like lamp issue.Let me know are you handy with electronics stuff repair and can replace parts in circuit board? ...
Flat Panel Televisions
I have a Samsung HLT6176s and the lamp went out. I bought a new one, then 2 days later the screen faded to black then cycled off and on with no picture. I left it alone for a few minutes then i it turned back on and it sounded like the lamp was making a high pitch noise. I'm sketchy about turning it back on. What's wrong now?
Remove the lamp especially if you heard a high pitched whine/fan like sound or even a grinding noise.Look where the lamp faces and examine the color wheel (common failure part in these sets) to see if pieces are broken and missing or the whee ...
Samsung Projection Televisions
My sony sxrd 60 comes on only for a sec
than go off and red stanby lamp blinks 4
times,i have cleanned vents and checked bulb door,can only turn tv
off and back on ,and still onlly get screen to show for 1 sec,& go off
than green lamp changes to a blanking red lamp
Hi,4 times red light blinking indicates problem with exhaust fan that is not running and tv shuts down instantly due to protection mode activation.Please check exhaust fan and make sure its connector is plugged in and fan runs freely. ...
Sony KDS-R60XBR1 60" Projection HDTV
My Mitsubishi WD 60735 blinks the orange light as soon as I plug the power cord in. When I press the rest button the green light flashes for one blink then goes right back to blinking the orange light
Mitsubishi WD-60735 Projection Television
Have a mitsubishi 65 inch flat screen model 65735, I replaced the dlp chip because it went bad. I put it back together and now the screen stays dark blue with the timer light on green. I can still hear sound but my screen is so dark blue i can bearly tell its not a black screen. I rearranged the connectors and got different results, one time the lamp light was flashing orange, the other time when i turned the tv on it would turn right back off instantly with the lmap light orange and timer ligh
Mitsubishi WD-65732 65" Projection HDTV
I have a Sony model kdfe60a20. When I try to turn it on, the power light flashes green for a while then turns red. Also, the lamp light flashes red continuously. There is a buzzing sound coming from the back of the tv. Lamp, ballast, both?
Sounds like the ballast is causing the issue. You can get the ballast from www.tvrepairworld.com ...
I have a 52HMX84 DLP projection Television. The LED indication is...
Green blinks at 0.3 second intervals - red light solid.
Manual indicates the lamp is not working correctly so I ordered a new one and replaced it. The exact same result.
In the past, the bulbs popped and it was obvious the bulb was used up but in this case both the current bulb and new one look fine. What could it be and is it worth fixing?
Hello,I think this time, your TV is having a power problem.The issue you describe is consistent with a power supply board issue. This is the board where the AC goes to. This problem may have occurred as a result of irregular p ...
Toshiba Projection Televisions
Sony kdf60xbr950 Having the same problem with no picture. Green lights blinks first then the red lamp light. My first thought is the lamp. Then I had talked to a tech and he tried to tell me that its the balist or the power supply and likley not the bulb? Has anybody else been throught this and what was the outcome. This is the original bulb with only about 1000-1500 hours on it ? was working fine one day and the next this ?
The problem here with the lamp is it has an average 2,000 hour life--only way for a "tech" to know if it is the problem is to replace it.The ballast is the power supply for the lamp---lamp goes bad a lot more often than the ballast= sounds li ...
Sony Grand WEGA KDF-60XS955 60" Rear Projection HDTV
Replaced lamp in wd-60735 and after i plugged back in and after reboot process is complete when i hit power the green light comes on and you can hear static like tv is on an inactive channel, but after about a minute it shuts down. there is no blinking lamp light or anything and you actually have to unplug it and let it reset before you can attempt it again
In mitsubishi, the self-test diagnostic blinking will not be there by default. You will have to activate it by following the procedure below after you unplug and re-plugProcedure:After you unplug when the standby light is on, press and ho ...
Mitsubishi WD-60735 Projection Television
My Sony BRAVIA KDL-40EX400 will not turn on. When turning it on it gets to the Sony on the screen makes the sound, then the the green light fades and lights back up it goes to the sony screen then fades and turns on once more. It then goes into stand by and the red light blinks 6 times. How can i fix this?
Sony BRAVIA KDL-40EX400 40" LCD TV
I have a Vivitek RP51HD41-A TV. Yesterday it made a pop sound then sizzling and the picture went out. I unplugged it, the plugged back in. No picture. Looked to see if lamp burned out but small green light is on inside. The front lights blink on and off orange. No message calme up to replace the lamp like in the past. Any suggestions?
Hi ryser,\015\012\015\012Pop sound is coming from the parts either on the ballast board(lamp's driver) or power supply(ballast board supply). It means that you're bulb is not the issue that's why you've not encountered the led lamp indicator. C ...
Vivitek V37655 56" DLP TV
I have a kdf-50A10. I changed the lamp and now when I turn it on I get 7 green blinks then a cycle of three red blinks. I took off the door and put it back, still nothing and I can't see where the
Sony Projection Televisions
The Samsung HCM4215 Rear Projection TV was playing and all of a sudden the Picture disappeared but the audio kept on.
Then I switched off the TV and tried to switch it on but the TV is not turning on.
The tiny Timer light keeps on blinking and thats it.
I have tried unpluging the TV from power for one week and then plugged it back t power, but still the same Timer light keeps on Blinking and won't let me do anything with the TV.
By talking to friends it seems the DLP lamp has blown out but
First I need to clarify your tv. Your tv is not a DLP. It is a standard 3 CRT rear projection. So there is no Lamp/bulb to replace like you would find in a DLP. \015\012\015\012As for your problem. I would suspect a convergence failu ...
Samsung HCM4215W 42" Rear Projection Television
Will a bad lamp make the sound and picture go out on a Sony KDF-E60A20? Mine goes out every few minutes, but picture comes back before the sound. The green light stays on and does not blink, fan also stays on.
Sony KDF-E60A20 60 in. LCD HDTV
Lamp has been replaced in sony hdtv it blinks green then back to red three times what is the problem?
Sony Lamp issueI see this so much that I am going to compose and save this answer:3 blinks (it is in the owner manual) is "Lamp door not properlyclosed" ...
Sony Grand WEGA KDF-50WE655 50" Rear Projection HDTV
I have a sharp LC-37D40U that will not power on. The power light blinks 1 time every second. I held the input and volume - button while plugging the TV on and the TV cuts on and then cuts right back off, no buzzing sound is heard at all. I believe it is either the lamp or the inverter board by researching this site. How can I test which component is bad or just continue troubleshooting from this point?
OK if you have blinking red light.Try to open the cover then disconnect the inverter board after that try to power it on again..If the light stays in blue (LIT) and of course you don't have picture or backlight you have faulty inverte ...
Sharp AQUOS LC-37D40U BACKLIGHT INVERTER BOARD PN: IM3826-1
My Panasonic 61 inch projection tv will not stay on. I replaced the lamp, but that didn't resolve the problem. It will come on then picture and sound goes out. The green light stays on until I turn tv off. I wait for the red light to stop blinking, then turn it back on. It may stay on few minutes or few hours...HELP
Panasonic PT-61LCX65 61" Rear Projection HDTV