Having problems with your Projection Televisions ?

I have a samsung HL-R5064W and the picture fades, flickers, and the odd time the screen goes black then comes on again. What is the problem? Lamp? Color wheel? or? Thanks.


\015 I am in Edmonton, Alberta, Canada. Where would I get the required parts and is this a repair I could do myself?\015

Answers :

Repair Help & Product Troubleshooting for Projection Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

Mitsubichi VS 45609. When I turn the TV on sometimes it comes on and has beautiful picture and sound. Then after 1/2 or so it goes to a black screen. While on the black screen I am able to PIP it and see the the PIP screen with a clear picture. Also I can watch DVD's and play the games with a picture and sound. I for the life of me can not understand what is going. Why is it coming on and off? It either goes to a black screen or fuzzy like there is no cable channels. But I can have a beautiful p


I have the same TV and what is happing is the TV has 2 recievers in it to allow the PIP, So you have a power pack gone on 1 reciever the other is working, Your set has 2 power packs,1 for each receiver.\012I had both of mine go, 150$ a piece to ... Mitsubishi VS-45609 TV

My rca r52wm24 Tv turns on but after about 20 minutes the screen goes black but I still have sound. Sometimes the picture will come back up and work fine after 10-30 minutes but it will go to black screen again. Then sometimes the picture will be fine for around 20 min utes agin flash to black then flash right back to normal. rnWhennthe screen does go to black it slowley fades out takes about 10 seconds to go black


Hi mcpheeters16,\015\012\015\012First to isolate the loose connection from fault, check the cable connectors from the lamp and the ballast board. Pull-out the cables and then re-insert. Also check the ballast board from bad solder joints (crack ... RCA R52WM24 52" HDTV Projection Television

The screen was black with white dots all over it, I replaced C766 with a 220uF 35VDC capacitor, I now have a picture on component 2 only but in black and white, AV1 and 2 same original problem all black with white static. When the screen first comes up the picture is in the upper left corner black and white only with a bright green bar under the picture, wait a few minutes and it goes full size in black and white. What do I need to do to fix this problem?


Look for more bad caps, sound like on video board also problem ... Maxent MX-42XM11 Television

I have a samsung HL-R5064W and the picture fades, flickers, and the odd time the screen goes black then comes on again. What is the problem? Lamp? Color wheel? or? Thanks.


... Samsung HLR5064W DLP Projection TV

Sanyo 24 in flat screen model DS24425 Screen slowly goes fussy and slowly goes black , a slight tap on the rear left side brings the picture back to good screen,for a few minutes or a couple of hours no set pattern of time. When one turns the set on again some times come on clear other times very dul or black, slight tap and good screen. Sounds /act like a bad solder connection but which one do you have a wiring diagram or know where to get one? Thank you


Hello\015\012Your flat panel TVs picture tube base board has soldering loose contact with it. Just unplug your TV from AC mains socket, and open it. Pull out the picture tube base card from the picture tube neck. Pull it out straight, no sha ... Toshiba 55ZV650U 55 in. LCD HDTV

Vizio VT470M no picture, no sound, no backlight. Power supply board looks good all voltages appear correct (24V, 5V, and 3.7V) and no "bulged" capacitors . When I unplug unit for two hours, the screen comes on normally backlight comes back up and picture is normal, but changing the channel causes it to go dead again. Bringing up menu with remote is really sluggish and when attempting factory reset, it goes black. Vizio light on the front of the TV comes on and off when pressing power button,


Im having similar problem and with my limited knowledge of lcd tvs and the voltages ALL being good except the pwr on or sw on voltage from the main board to the power supply which tells it to switch everything on Im guessing that something is going w ... Vizio VT470M 47 in. TV

My LG flat screen tv is losing HDMI signal then goes black. I've tried to change to a different input but it won't change. After a few minutes of black screen it starts to flash a few times then back ti black. A few minutes later it will start connecting again and picture will come back on. Is it the tv or maybe my direct tv reciever


I have the same trouble too any fix yet ?? ... LG Flat Panel Televisions

Lost picture Lately,after about an hr1/2 the picture suddenly disappears. I still have sound but the screen goes black.. no warning, just picture gone. new batteries in the remote. I shut the system down (set top box&tv) then turn it back on and so far the picture's been coming back. I've had the set since '05.I'd appreciate your input. Thanks.


Try unplugging everything and then plugging it back in. When my xbox had the "ring of fire" my brother asked me to fix it and I just unplugged and re plugged it worked and came back to life. (be careful that you either have the instuction menu for se ... Protron PLTV3250 32 in. LCD Television

I have a 43 inch samsung DLP tv 2004 model# HLN4365W, I was getting a black and white picture, so i replaced the color wheel which was broken. It worked fine for a couple of days then there was no picture, i have sound. The lamp is working - no errors on front panel. If i look in the back of the tv i can see light coming out of the lens, but no picture on the screen. What could be the problem? Thanks


... Samsung HLN4365W 43" Rear Projection HDTV-Ready Television

I have a 43 inch samsung DLP tv 2004 model# HLN4365W, I was getting a black and white picture, so i replaced the color wheel which was broken. It worked fine for a couple of days then there was no picture, i have sound. The lamp is working - no errors on front panel. If i look in the back of the tv i can see light coming out of the lens, but no picture on the screen. What could be the problem? Thanks


No picture on a DLP when you can see the lamp is working is ALWAYS the DLP chip. BECAUSE you recently replaced the color wheel, i suspect that the LVDS/data cable to the light engine was not plugged in well and has come loose. I suggest checking and ... Samsung HLN4365W 43" Rear Projection HDTV-Ready Television

My philips 47" screen goes black tv still on. i have to turn tv off wait 10 to 30 seconds turn tv on and picture come back on screen.


... Philips 47PFL7403D 47 in. LCD TV

My tv comes on, but the left side is black & after about 20 mins. the whole screen goes black. you can still hear it, but just dont have a picture. it a philips 47 in. 7422D-37


Unplug the television, wait for 60 seconds.Then re-insert plug into themains socket and turn on the television again.Your TV has a protective mode in case there is too much heat build-up.Verify the clearance around the vents of the de ... Philips 37PFL7332D/37 37PF7332D/37 37 LCD 1366 x 768 HDTV 37 in. LCD TV

When I turn on my television, the picture and sound comes on, then about 10 seconds later the screen starts to flicker, then goes black. The sound is still no but no picture.


... Vizio VW42LF 42 in. LCD HDTV

Have Protron PLTV-3250 TV and I was told the power supply board was bad. All indications concluded this was the problem. Replaced the power supply board (FSP194-3F01 power supply) and turned the TV on. It has power, but I have no picture. I can hear the sound from each channel, but that is it. I can change the different sources using the remote control and when I come back to TV, the picture (white fuzz or blue screen) will flash for a moment, then it goes black. If I select a source that


... Spectroniq PLTV3250 32 in. LCD TV

Have Philips 60PL9200D/37, having red light temp problem, fixed fans, fans are working just fine but sometimes after the tv has been on, red temp light comes back on and screen goes black, turn it on and picture comes back


... Philips 60PL9200D Projection Televisions

I have an olevia lcd lt32hv tv that i picked up from an electronics dump... it seemed that there wer no problems with it but come to find out the aspect ratio is off a bit and the picture is a little bit colorless (on rgb out) and for some bazzar reason i cannot get into the menu... when i click the menu button it sits for a second and the screen goes black flashes and goes back to the input i was on (source) i have no clue whats wrong but can someone help with the menu button?


... Olevia LT37HV 37 in. HD-Ready LCD Television

My technika tv does a very similar thing. Black screen until I press the display button on the remote control. The picture comes on fine for a second then goes black again. Think my kids have pressed


... Flat Panel Televisions

LG 42LK520 LCD TV screen takes 20 minutes to come in clear. During this 20 minutes, top 2 inches of screen works fine, but the rest of the goes black or picture freezes off and on during this time. I was informed the most common problem is bad capacitors on power supply. So I purchased a whole new power supply, and changed it myself! But unfortunately it didn't fix the problem.... Need help please


Is it cable tv ... LG Flat Panel Televisions

In my tv is 10 years old and by the 2007 we replaced with new board(Only the CRT is the old one). Last day I was switched on my tv only sound only came and no picture. I can able to see the menu setting in TV live volume increase and decrease, Chanel nos etc. When I remove the external cable connection the display comes like blue screen(looks like the CRT is ok). When I inserted the cable the blue screen goes off and became black color during that time the audio of the tv is good. Pls help to s


Hello\015\012Your TV is fitted with Toshiba kit I understands from your description. There is a sub-brightness contorl on board [a small preset resistor, which can be adjusted with a small screwdriver] fitted near to the LOT and towards its le ... Flat Panel Televisions

Hello my easy touch 42" tv has no picture when turned on the only thing that comes up on the screen is easy touch and the screen just goes blank the tv has the red light on when i plugged the tv in to the mains and when i pressed the power button the blue light comes on and the the easy touch logo comes up on the screen and it it just goes blank the tv itself is a lone tv as my lg smart tv is being repaired i just wanted to know if the tv had to warm up before there is any picture


... Flat Panel Televisions

The screen goes black and the green indicator lights flash, after a few seconds the picture comes back on. This has happened about 4 times w/in the last day. sony kdf-55xs955


Most common resolution to this is to replace the lamp. When nearing the end of life cycle for the lamp, it will either warn you with a "Low Lamp Life" on the display or cycle power on/off. Replace the lamp and the problem should stop. Other possibili ... Sony Grand WEGA KDF-55XS955 55" Rear Projection HDTV

I have a baird 32inch lcd it has sound but picture comes on for about 1 second then screen goes black.


... Flat Panel Televisions

While watching my LNs4051Dx TV the screen goes black but sound is still on. I power off and on the cable box and TV and picture comes back but only for 30 minutes or so. Three years ago I repaired the capacitors on this TV with great success. Anyone have a fix for this problem?


Replace CM807 and CM808 1000uf 25V in the power supply section. ... Samsung LN-S4051D 40 in. LCD Television

I have a Soniq E46Z10A-AU 46" full hd led lcd tv which keeps coming up with 'loading epg' then screen goes black. Still have sound but no picture. TV is only 9 months old


... Flat Panel Televisions

My LC-37SH20U was working fine. Then, when I gor home from work and turned it on, I heard the usual volume and the "click" from inside, then the picture comes on. After only 4-6 seconds, the screen went black but the volume stayed for about 3 seconds. Then I hear a click again, and evrything goes off, but the power indicator keeps flashing green. When I hit the power button both on the set or on the remote, nothing happens. model are sharp LC-37SH20U


This is a fault solution which can be checked and corrected by you assuming that there is no component failure. There is a high possibility that the components over a period of heating and cooling, tend to bring on a problem of dry soldering ... Sharp LC37SB24U 37 in. LCD TV

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.2761 seconds