Having problems with your Projection Televisions ?

My HLN617W dlp will turn on with no picture (sound is OK), then will seem to turn off, then back on again without me doing anything. After this ritual being repeated, the timer and lamp lights will start to blink followed by lamp only blinking then tv powers off... any ideas?



Answers :

Hi,
\015\012 Check the lamp. possibility of lamp get damaged. check the lamp if possible try to replase it. you problem will be solved.
\015\012ok

Repair Help & Product Troubleshooting for Projection Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

My HLN617W dlp will turn on with no picture (sound is OK), then will seem to turn off, then back on again without me doing anything. After this ritual being repeated, the timer and lamp lights will start to blink followed by lamp only blinking then tv powers off... any ideas?


Hi,\015\012 Check the lamp. possibility of lamp get damaged. check the lamp if possible try to replase it. you problem will be solved.\015\012ok ... Samsung HLN617W 61" Rear Projection HDTV

I picked up a Mitsubishi Model No. WD- 62527. The guy said all it needed was the lamp replaced, I replaced it and the tv still doesn't turn on. Their is a green light that blinks were it says timer for about a minute then the orange light under lamp turns on. About a second later the green light under timer blinks three times then turns off and then the only light on is the lamp orange light. It will continue to do this hole scenario over and over again...HELP!


... Projection Televisions

3-yr old Samsung HL-S46765;symptoms indicated lamp diing; finally TV would not turn on;un-plugged tv, removed lamp to verify code and make (Phillips);put in new lamp; TV turned on for about 30 seconds;all indicator lights went out;tv shut off; all indicators lights blinking (lamp problem). unplugged tv, removed lamp housing; put back in; plugged in.; waited; tried to turn tv on - tries, then indicator lights start blinking


Thank you for posting your question on Fixya. In such a case the first thing to check would be to see if the lamp is coming on momentarily before it shuts off. For this please remove the back cover of the tv and fire it up. Please check the status of ... Samsung Flat Panel Televisions

I have a samsung HLN5065W dlptv. My wife turned it on one night and no picture. we did get sound. i noticed when I turn the tv on, it shuts down and restarts to no avail. I see a blinking lamp light and after a few restart attempts, i get the three blinking lights. I have replaced a lamp supplied by samsung parts. still no picture. same three lights blinking. do you have any ideas?


The tv also have a board that call the Ballast board could be dead too.This Ballast board only job are to ignite the tv projection lamp. ... Samsung HLN5065W 50" Rear Projection HDTV-Ready Television

Samsung HLT5075SX/XAA. TV is around 3 years old. Once TV is turned on there is no sound coming off, green light is blinking then turns into red then tries to start with green blinking. Fan turns on when red light is on. Then after a bit all of light blinking. Replaced lamp, that didn't fix it. Was told here to replace ballast. Replaced ballast the same problem occurs. No ballast light when the TV is turned on. Bought the service manual.


... Samsung Standard (CRT) Televisions

Lamp turns on lamp light starts blinking then turns off


Check the lamp ballast, it works just like a flourecent light if the ballast is bad it will turn the light off. It comes on a board try searchinng ......ebay or thetvdoctor.comXHRWN5 ... JVC HD-56FB97 HDTV

My Samsung 46in DLP turns on but within a few minutes it truns off and the timer, lamp and red stand by/ temp lights blink. Any Ideas?


The blinking lights usually indicate that the lamp is faulty or burnt out. In this case a new lamp would be required. The lamp in your projector set should last around 3-4 years of typical use. If your lamp is at the end of it's life you may have not ... Samsung SP46L6HXX/XEU 46" HDTV-Ready DLP TV

Hl-r4667w shuts off when warmed up, will shut off more often when hot. No blinking lights. the red ready standby light will be on. First started after tv was on for 5 plus hours and when turned back on would be fine for another hour. Now it starts after a couple hours and when the tv is turned back on it can shut down again in a few minutes. It has a 4 screw rear lamp door but have tried taping lamp door switch down no change.


Heat sink has been damaged ... Samsung HL-R4667W Rear Projection Television

Okay, so last night my Hitachi 55vs69a starting shutting itself off. I could turn it back on after a few minutes and within an hour or less it would shut off again. This morning it will not turn on at all. The lamp and temp light were flashing but now the lamp light is the only light showing. It's not flashing, it just stays on. I just changed this bulb 2 months ago so it is new. I was told to reset the lamp timer but now since the t.v. will not come on, I cannot do that. The bulb has not bl


If you bought a cheap non Hitachi lamp that could be bad and look fine.I would remove the lamp and look at it and reinstall it making sure it is in properly----what was wrong with the old lamp? Did it still work at all? ... Projection Televisions

I have a Panasonic HDTV 1080i. The Tv keeps turning itself off and the power light turns yellow and blinks. If I wait for 5 minutes and press the power button the TV turns back on and sometimes it stays on and sometimes it switches back off. The lamp light does not light up or blink just the power button. Any ideas?


Hi,I am sorry to hear regarding the trouble. However, there are few possibilities that could cause the same issue. If you have electronics repair experience, and wanted to diagnose / repair the set yourself, revert and i would be able to ... Panasonic PT-60LC14 60" Rear Projection HDTV

I have a Hitachi Ultravision model 50VF820. It will turn on and the blue light starts blinking and after a few seconds the lamp and temp red lights start flashing in order (power, temp, lamp). I had the lamp replaced about a year and a half ago but not the cooling fan. How do I know if it needs just a fan or another lamp as well?


Fans fail rarely---two years is average life for a lamp--at least take lamp out to examine it to see it is not shattered inside. ... Projection Televisions

I have a mitsubishi dlp WD-65733 and it went out on me a week ago. when I power it up i get only the green light above the timer. when i hit the reset button in the front i hear a click in the back and the green timer light starts blinking for about 30 seconds the it powers off. I do not get any lights above the status or lamp. i have replaced the bulb before about 1 1/2 years ago. could this be the bulp again? when i replaced it before i had an orange lamp light but not this time.


Hi,It seems problem in power supply board that got few electrolytic capacitors leaky and causing problem. It does not look like lamp issue.Let me know are you handy with electronics stuff repair and can replace parts in circuit board? ... Flat Panel Televisions

50hm66 There is a new bulb in the TV, and it is working. However, it takes several tries to light the lamp before it will start up. If, after I turn the unit off, and come back to it in a couple hours, it will not start at all, and I just keep getting the yellow blinking light over and over, as it tries to start up. Eventually I will get the red blink with solid yellow. If I wait a day, the unit will start again after a couple tries.


Some possible reasons include: New lamp is generic and or has a issue----excessive dust or dirt inside the unit on fans etc.Some of these units had a feature in the menu for quick on where lamp is lit at low level all the time---this shorten ... Toshiba 50HM66 52" Television

The Samsung HCM4215 Rear Projection TV was playing and all of a sudden the Picture disappeared but the audio kept on. Then I switched off the TV and tried to switch it on but the TV is not turning on. The tiny Timer light keeps on blinking and thats it. I have tried unpluging the TV from power for one week and then plugged it back t power, but still the same Timer light keeps on Blinking and won't let me do anything with the TV. By talking to friends it seems the DLP lamp has blown out but


First I need to clarify your tv. Your tv is not a DLP. It is a standard 3 CRT rear projection. So there is no Lamp/bulb to replace like you would find in a DLP. \015\012\015\012As for your problem. I would suspect a convergence failu ... Samsung HCM4215W 42" Rear Projection Television

Have a PT50DL-54J . Just changed the lamp and it will not start back up.Just a blinking green light. For the past while theTV has been displaying "replace lamp" but I couls still watch it. Then one day it would not turn on at all. Same green blinking light. I thought it was the bulb because of the error message saying so. I changed the bulb and its THE SAME PRWhat's wrong. Does it need to be reset somehow or something or am I SOL


... Panasonic PT50LCX63 50" Rear Projection HDTV

JVC AV-F29MX3 I was watching a film on my DVD connected to the TV, when suddenly the screen turns black with no sound heard. Also the front light indicating 'ON TIMER' and 'ECO' started blinking in red and orange respectively. when i turn the TV off and then turn it ON the same situation of blinking is observed. Can someone please suggest me a solution for it?


Usually after 4 or 5 yrs EHT ( transformer that supplies voltage to tube ) becomes weak - then TV won't get ON.. means no picture no sound ..but LED blinks - in some TVs along with EHT 1 or 2 components like resistor, transistors, etc will also ... JVC AV-F29MX3U 29" TV

I have a Panasonic PT-50LC13. Replaced the lamp and then the complete Ballast box. now when I turn on the television it comes on for about 10 seconds then shuts off and the red light blinks indefinitely about 1blink/sec. Have to unplug the set to get the light to stop blinking. Any ideas what may be wrong?


This set should not even be around, there was as you may or may not know a massive recall and in the USA all were supposed to be exchanged. I know as we were involved in picking dozens up and sending them back to Panasonic, they did not care if w ... Projection Televisions

I just changed the lamp on my AKAI but the TV won't turn on , front button blinks "lamp" then "timer" starts to blink also


... Akai PT50DL24 50" DLP TV

I have a JVC HD-52FA97 projection TV. After about 10 seconds after turning the TV on the red lamp light and blue power light start flashing together rapidly. The TV sounds like it is turning on, but there is never a picture or sound. Any idea what is wrong and if this is something I can fix? I would hate to buy a new bulb and have that not be the problem.


The lights may be related to each other or their problem might be isolated.For the red lamp light, it is not necessarily a faulty bulb but an error which may affect the bulb. It could be because an error detected. The fan's temperature ... JVC HD-52FA97 HDTV

Mitsubishi 52825 TV has new lamp. Green light goes on then it goes to red. Reset on front of TV and after several attempts had a picture. Recently, the green light was on with no picture I turned off then on and the timer light blinked green then green TV light went on and picture appeared. Any suggestions?


Try these first then we will check the internal components \012\012\012TV needs servicing\012\012\012CERTIFIED TV EXPERT HERE, follow this information I provided 3 long solutions to this issue/s Solution 1 Before we start taking things ap ... Mitsubishi Projection Televisions

Have Samsung HL-S466W- Replaced Lamp (OEM), Replaced Color Wheel, Replaced Ballast. Currently the fan turns on for a few seconds, all three lights blink: Timer,Lamp, Standby. No Video or on screen sound. Lamp doesn't power on, nor can I really hear if the color wheel is activating. What can I troublshoot next before investing more in this model? Already verified the wires are correctly in place and the back door panel is tightly secured to activate the power switch.


... Samsung HL-S4666W Television

Mitsubishi WD 62525 will not turn on. Timer light blinking green.


... Mitsubishi WD-62525 62" Rear Projection HDTV

PANASONIC PT-60LC14 ? Hey I have a Panasonic PT-60lc14 TV and when I turn it on it shuts off about 3 or 4 seconds later and the temp light flashes... I replaced the lamp because it needed to be replaced but it will not stay on longer than 4 seconds, idk what's wrong, the temp light blinks once every five secs about.. any ideas? ? Help muchhhh appreciated.


Check your remote it may be in a different mode or your wires or cables maybe disconnected also sounds like your auto shut off has been activated ... Panasonic Projection Televisions

I have a 46 inch ergs Sony rear LCD TV and I replace the lamp but when I turn it on the green power light flashes 4 times and then goes red and starts blinking 3 times I know that that means lamp door is not on. But it makes a clicking sound is this the circuit board?


... Projection Televisions

Mitsubishi wd 62527 blinking status light what can I look at? No Picture, Flahing TImer light goes off agter 2 min then tv turns off and if you power it on it flases Lamp and Status multiple times?


This is a common issue with bad capacitors in the TV. You can call in a shop or repair it yourself. You can google the parts using this number Z1234TV ... Mitsubishi Projection Televisions

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1998 seconds