Having problems with your Projection Televisions ?

I have a samsung HLN5065W dlptv. My wife turned it on one night and no picture. we did get sound. i noticed when I turn the tv on, it shuts down and restarts to no avail. I see a blinking lamp light and after a few restart attempts, i get the three blinking lights. I have replaced a lamp supplied by samsung parts. still no picture. same three lights blinking. do you have any ideas?



Answers :

The tv also have a board that call the Ballast board could be dead too.This Ballast board only job are to ignite the tv projection lamp.

Repair Help & Product Troubleshooting for Projection Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

I have a samsung HLN5065W dlptv. My wife turned it on one night and no picture. we did get sound. i noticed when I turn the tv on, it shuts down and restarts to no avail. I see a blinking lamp light and after a few restart attempts, i get the three blinking lights. I have replaced a lamp supplied by samsung parts. still no picture. same three lights blinking. do you have any ideas?


The tv also have a board that call the Ballast board could be dead too.This Ballast board only job are to ignite the tv projection lamp. ... Samsung HLN5065W 50" Rear Projection HDTV-Ready Television

I have a samsung dlp model hls5086wx/xxa that recently stopped working. Lamp light came on so I assumed the lamp needed replaced. Replaced the lamp and still won't turn on and lamp light blinking. It also make a whining noise when turned on but I don't get a picture. Is it the color wheel or ballast? Any suggestions?


... Samsung Projection Televisions

Hello, I have a Samsung DLP HLR5667 and it blew a lamp 4 months ago, I replaced the lamp and it worked fine for about 2 months and started shutting off after only running for about 90 seconds. I reset the lamp hours and it worked fine for another 2 months. Now it is shutting off after 90 seconds of running, first the picture then the audio. All three lights then begin to blink. Troubleshooting I have performed is 1. I have cleaned the interior of the television. 2. Jumpered the lamp door switch.


You need to replace your color wheel. This is a very sensitive part and you need to take care when replacing. If you feel comfortable I can walk you through it. If not, I would take it to a authorized service center. ... Samsung Projection Televisions

I have a sony kdf 50e-2000 the green light goes on then it goes to thr red blinking lamp light. I have no sound or picture. If I replace the lamp light will I get sound and a picture again?


Hi,Yes, if you have not replaced the lamp since you purchased this TV.Lamps usually last about 6000 hours.I've seen lamps last much longer than 6000Hrs, it all depends on the usage.Remove the lamp from the TV and do a visual inspectio ... Sony KDF-50E2000 50" HDTV

I have a Samsung Projection TV. Model Number HCM4215X. Picture went dark. When I try to power it up, the chirps happen, red light blinks, audio stays on for a few seconds, stops, and then the TV restarts. I think the lamp needs replacing since I have no picture, but is there's anything else I should be looking to replace as well?


... Projection Televisions

Samsung model hlr4667wx/xaa. Will not turn on. I can hear it try. It makes the loading up sound, lamp turns on, but screen is still black. At first everthing would power up ok including picture, but a few moments after shut off. But now...just the noise. It also originally went from three blinking lights to two. Its not the lamp. Had already tried that.


Have you had a issue where you heard a high pitched whine or fan like sound?Examine the color wheel- can be done with lamp removed--look in the opening the lamp faces---is wheel intact or missing any pieces?The set will turn lamp on ... Samsung Standard (CRT) Televisions

Samsung hlp6163w dlp tv not working, new lamp, new ballast, still three blinking lights


If color wheel does not run lamp will not fire----with lamp removed have you looked at the wheel----if not running it will cause almost instant shutdown of lamp and the set.If the DMD board is bad time for a new set as it is well over 500 . ... Samsung HLP6163W 61" Rear Projection HDTV-Ready Television

Three blinking light on the front of my samsung DLP flashed and TV would not turn on. I replaced the Lamp($154) and now the picture is great. worked the night before 3hrs, and the next mourning if turns off 5 min when watching the news. Any ideal on how to fix this problem??rn Frank Pangelinan


... Samsung HL-R5656W 56" DLP HDTV

Hi, i got samsung dlp tv m# HL-P5063W.i changed lamp,ballest,collerwheel,and lamp door cover sensor. but tv still doesnt come on.once you plug in the power cord green lamp sign blinks 35 times then cutts off and one time stand by red light blinks,then green lamp starts blinking again. lamp never gets come on. please help.


Seemed like it is a problem with the power supply circuit. Check the circuit where the power chord is connected internally to the TV. You should see capacitors. Check for swollen or leaking ones that may need replacing. Check also for burnt compo ... Flat Panel Televisions

We have a Samsung HL67A510 and when I turn it on, I can hear a click and the green LED light blinks and the "on" music plays and I can hear the fan blowing in the back. But after a couple of seconds, I hear a click again and the fan shuts off and the red LED light comes on, then it starts the process over again. After about three cycles of this, the whole thing shuts down and the two green LED lights and the red LED light blink simultaneously and do not turn off. At no time do we have any pictur


Hi Isnovero, \012The main reasons of your problem is the bulb which\012is already came to its end. The unit will automatically shuts off when it sense\012a bulb failure. But ... Flat Panel Televisions

Hl72a650 Hi I have a Samsung hl72a650. Replaced lamp a year ago. Tv suddenly one day started to shut itself off and back on again. I have tried everything else I have researched online. Took lamp out and back in several times. When the tv comes on the picture is very bright and clear then suddenly the picture begins to loose color and shuts off and back on several times untill all 3 lights start blinking. I also started the tv with mute 182 power and selected options clear lamp, reset user setti


Color wheel issues replace light engine ... Projection Televisions

I have a sony kds 60a2020. the lamp sensor light was flashing and no picture. i bought a new lamp and installed it and now all i get is red power light flashing three times. as much as i can tell am pretty sure the lamp door is secure. i understand it could be a power board board issue?? any help is appreciated


A lot of these had problems with the lamp door; you need to remove the door and take a careful look at it edgewise---heat from the lamp can warp the door.Notice the small plastic peg on the back of the door--when installed it engages a le ... Sony KDS-60A2020 60" HDTV

Samsung dlp tv with three flashing light on front, I have replaced the lamp but I am still getting the flashign lights with the new lamp


... Samsung HLN5065W 50" Rear Projection HDTV-Ready Television

The Samsung HCM4215 Rear Projection TV was playing and all of a sudden the Picture disappeared but the audio kept on. Then I switched off the TV and tried to switch it on but the TV is not turning on. The tiny Timer light keeps on blinking and thats it. I have tried unpluging the TV from power for one week and then plugged it back t power, but still the same Timer light keeps on Blinking and won't let me do anything with the TV. By talking to friends it seems the DLP lamp has blown out but


First I need to clarify your tv. Your tv is not a DLP. It is a standard 3 CRT rear projection. So there is no Lamp/bulb to replace like you would find in a DLP. \015\012\015\012As for your problem. I would suspect a convergence failu ... Samsung HCM4215W 42" Rear Projection Television

Lamp light continues to blink but no picture samsung hlp 6163wx/xaa


... Samsung HLP6163W 61" Rear Projection HDTV-Ready Television

I have a samsung projector tv model # hly5676sx/xaa tv turnes on fans run for 3 seconds then tv shuts off no picture or sound and the standby and lamp light blink on and off its been suggested lamp cover not properly closed but thats not the case is lamp bad or do i have some other problem


... Samsung LN46B650 46/49.5 in. LCD HDTV

Have Samsung HL-S466W- Replaced Lamp (OEM), Replaced Color Wheel, Replaced Ballast. Currently the fan turns on for a few seconds, all three lights blink: Timer,Lamp, Standby. No Video or on screen sound. Lamp doesn't power on, nor can I really hear if the color wheel is activating. What can I troublshoot next before investing more in this model? Already verified the wires are correctly in place and the back door panel is tightly secured to activate the power switch.


... Samsung HL-S4666W Television

I have a 43 inch samsung DLP tv 2004 model# HLN4365W, I was getting a black and white picture, so i replaced the color wheel which was broken. It worked fine for a couple of days then there was no picture, i have sound. The lamp is working - no errors on front panel. If i look in the back of the tv i can see light coming out of the lens, but no picture on the screen. What could be the problem? Thanks


... Samsung HLN4365W 43" Rear Projection HDTV-Ready Television

I have a 43 inch samsung DLP tv 2004 model# HLN4365W, I was getting a black and white picture, so i replaced the color wheel which was broken. It worked fine for a couple of days then there was no picture, i have sound. The lamp is working - no errors on front panel. If i look in the back of the tv i can see light coming out of the lens, but no picture on the screen. What could be the problem? Thanks


No picture on a DLP when you can see the lamp is working is ALWAYS the DLP chip. BECAUSE you recently replaced the color wheel, i suspect that the LVDS/data cable to the light engine was not plugged in well and has come loose. I suggest checking and ... Samsung HLN4365W 43" Rear Projection HDTV-Ready Television

RCA HD61LPW165 No picture, sound fine. Changed the lamp and ballast and still no picture . No blinking lights. Cant get anything on screen


... RCA HDLP50W151 50" Rear Projection HDTV

I have a Samsung DLP HLN617WX/XAA. After turning off by itself, the three indicator lights were blinking... signifying a defective lamp. I've re-seated the old lamp several times with no change. I


... Samsung Projection Televisions

I still have the problem on my 57in. Sony projection TV I clean the shields or lens on top of the three colored lamps when I removed the back cover the picture improved for a couple of days but it went back to all green and green arched horizontal lines I have sound but it goes black and the standby light blinks 5 times can this be fixed? Do any lamps have to be changed? If so how are they changed and where can they be purchased/


What is the Model Number listed on back of TV?? ... Sony Projection Televisions

My Samsung hls6186wx/xaa projection pb01 tv will turn on briefly then shut off. The three lights by the controls on tv are blinking: the light that is labeled lamp and the other labeled timer are blin


Check the fan if it is working or check the lamp which need to replace it now . ... Flat Panel Televisions

I have a Samsung HL85687W tv. We replaced the lamp in June. Today the picture is very dark and the temp lights are blinking again, with the tv shutting itself off again. Shouldn't lamps last more than 8 months?


... Flat Panel Televisions

Toshiba 42H83 42 in. Rear Projection HDTV had the hyper module capacitor problem that Toshiba put notice out about. Changed those then plugged set in picture came in the three lamps noticably showed green,red, blue at the bottom of screen noticed grey static area because TV was not connected to cable or other device. Suddenly TV turns self off, now when plugged in to outlet power light blinks three times set turns off with speakers acknowlegement(sounded like speaker). I apparently have power d


If you bought a hypermodule rebuild kit from www.TvRepairKits.com go back to their site and ask for help. If you just bought parts off the web and winged the repair its hard to ... Flat Panel Televisions

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.2256 seconds