First thing would be to remove cover and look at fans, dirt or dust on one will lock it up.
Google the model number with Parts and a good idea if one or more are identical is replace or even swap them.
The lamp fan and main fan should be easy to see with back removed and are plugged in so if an exact replacement is obtained a few screws and plug and back in business.
Suggested Questions/Answers :
It is recommended you read all this kind of situations
How to replace fan 3 samsung 61 in led dlp
First thing would be to remove cover and look at fans, dirt or dust on one will lock it up.Google the model number with Parts and a good idea if one or more are identical is replace or even swap them.The lamp fan and main fan should b ...
Samsung HL61A750A 61" HDTV
I have a 2008 Samsung 61" DLP TV Model #: HL61A750A1F. It is displaying a check fan 3 error on the screen then after a while it turns itself off. I've called in a technician that was adamant that the fan was fine and the lamp needs to be replaced. When he came over to replace the lamp he said that my model doesn't use the regular lamps that it uses a fluorescent lamp and that it can not be repaired outside of Samsung. Is what the tech said true?
I have a Samsung hlp5063w dlp tv.
1- loud buzzing noise coming from the left side of the set (looking from the front). When I tap it the noise tends to go away and come back. So I'm thinking it's the cooling fan for the lamp which I just replaced. Would the color wheel act like that when I'm tapping the side of the tv? The picture is beautiful and there are no problems there.
2- If its the cooling fan, how do I replace it?
It is much more likely considering all these the wheel fails to be your issue.The problem is often described as a fan like or high pitched sound which since the motor on the wheel turns at over 12,000 rpm is likely to be the cause.Hin ...
Samsung Projection Televisions
My Samsung DLP 5663W was making the loud humming noise. Picture was just fine, but the noise was loud. I checked both fans which seemed to be fine, so I ordered the replacement color wheel. When I replaced the color wheel and turned the set back on, the skin color on everyone is bright blue. What can I do?
On the metal box where the two cables from the color wheel plugged look for a tiny rectangular opening in the metal shield---there is a tiny jumper plug there, remove it carefully with a tiny pair of needle nose pliers.One of the things t ...
Samsung DLP HL-P5663W 56" TV
I have a Samsung DLP HLT6176SX/XAA model and the 1st and third light are blinking and the tv turns off by itself. I tryt to turn it on and then after seconds, it turns off again. I think this may be related to a fan not cooling correctly? Is this the problem, what can I do to fix this, do i need to replace the fan, can you help with part and directions on fixing this?
Samsung HLT6176S Television
Samsung HL-T6756 DLP TV Standby/temp light flashing and tv won't come on. I have replaced the lamp and the fan is working. Any suggestions?
Remove lamp and inspect the color wheel to see if missing pieces or shattered---it will also just before failing give a high pitched or fan like sound and if running too slow or not at all instant shutdown happens.Its also possible if you bou ...
I own a Samsung HLR4667WAX/XAA DLP. The cable guy replaced the hd box and said it was the TV. The Lamp and the fan work and then go out. "Standby/Temp" in red comes on the front of the TV. There is no picture.
I'd like to know what the possible issues may be?
What should I look at. For example where is the color wheel?
Hi,Does Standby/ Temp light blink or solid?How old is this tv and when did you replaced lamp last time?These info will help me to diagnose p[problem.Thanks. ...
Flat Panel Televisions
Samsung HLR5064W DLP TV, lamp timer light flashing, but there is a loud vibration noise like a fan blade hitting something at the back of the set. I replaced the lamp a couple of years ago, and I think it's still Ok, but what's with the vibration?
Sounds like a bad color wheel----remove lamp---the wheel faces it--look for missing pieces or the wheel shattered---these are known for the wheel making a loud high pitched sound or even a grinding sound if the wheel shatters.if wheel bad You ...
How do I replace a lamp fan in Samsung HLR6167 WX/XAA dlp tv?
There is too much to type in here about this repair. If you wish to get more details, check this site. Pull up older posts there. Check the site with pati ...
Hello. my samsung HL61650A 61'' DLP tv is about 2.5 years old, and tonight it just shut off. tried to turn back on, got 2 'buzzing' sounds from the back, but it wouldn't turn on. unplugged, undid back cover, put blue switch to 'down', still no luck. now, it won't really even try to power on, and standby & lamp LED lights blink. do you think it is solely the Lamp that needs replaced? help!?
Samsung HL61A650C Television
Cooling Fan My lights are blinking and according to Samsung's codes, it means a cooling fan is not operating and needs to be replaced. How do I know which fan? How many fans are there? If I'm going to replace one should I replace them all?
Samsung HL-R4266W 42" HDTV-Ready Projection Television
We have a Samsung HL67A510 and when I turn it on, I can hear a click and the green LED light blinks and the "on" music plays and I can hear the fan blowing in the back. But after a couple of seconds, I hear a click again and the fan shuts off and the red LED light comes on, then it starts the process over again. After about three cycles of this, the whole thing shuts down and the two green LED lights and the red LED light blink simultaneously and do not turn off. At no time do we have any pictur
Hi Isnovero, \012The main reasons of your problem is the bulb which\012is already came to its end. The unit will automatically shuts off when it sense\012a bulb failure. But ...
Flat Panel Televisions
My new Samsung UN65C8000 LED TV has an intermittent pattern of horizontal banding that is present probably 70% of the time and varies from narrow width banding to wider width at times. This is the second of these models I've had, the first just having been replaced by Samsung. I have a 42" Samsung 120Hz LED that has a flawless picture run over the the same AV system with the same inputs
You did not say if the first one went back for the same fault. If it went back for a different fault then this set is faulty! If not then unless it it more susceptible to RF interference possibly mains borne than the flawless set (that is possible) ...
Samsung UN65C8000 TV
Samsung 61 Service Model: HLP6163WX/XAA Model: HL-P6163W Samsung DLP with flickering and partial freeze frame upon start up persisting for about 10 minutes before picture (from any signal source) will resolve and then operate properly for as long as the set is left on. DLP bulb recently replaced and does not appear to be the symptoms of a bad color wheel.
Could this be a light engine issue? DMD issue? light tunnel issue? ballast issue? Not sure how to trouble shoot... please help...
If using a cable or sat box try a DVD etc when set cold, a box can cause lockup issues via signal.Not a color wheel is correct, more likely a DMD which is rather pricy and almost as much as the entire light engine which comes with it. ...
Samsung HLP6163W 61" Rear Projection HDTV-Ready Television
Samsung HLR5064W DLP TV load vibrating noise like a fan blade hitting something, lamp light is one, Tv will light up but discolored
Sounds like a bad color wheel----remove lamp---the wheel faces it--look \012for missing pieces or the wheel shattered---these are known for the \012wheel making a loud high pitched sound or even a grinding sound if the \012wheel shatters.if w ...
Samsung HLR5064W DLP Projection TV
I have a HLT6187SAXXAA when I turn it on it does its little tune the n the fans come on for about 5 secs the reboots, it does this 3 times then it goes to all 3 lights blinking, my modle has no lamp but it has 3 leds, red , green and blue. I tested the voltages from the power board the powers the leds and all the voltages were fine but no leds. i tested a 3 leds with a 9 volt battery and they all power up so I replaced the led driver boarn with a new one and now it does the same thing what else
Samsung HCM4215W 42" Rear Projection Television
I have the Samsung LED DLP Model number HLT6187SAX/XAA, Version RE01, Awhile ago while i was watching a movie the tv went black with just the audio still working. I turned off the tv than turned it back on, it came back on but with a blue green tint, it kept flashing blue. I took it apart and cleaned the heat sinks on the LED's as they were very dusty. Now it works fine but with out any red colors. I believe the red LED burnt out. Is there only one light engine for all the LED's or does each LED
Samsung Projection Televisions