Having problems with your Flat Panel Televisions ?

I have a Samsung HLT5076S DLP Tv. I watched it this morning and when I came back home I tried to cut it on but no picture or sound. I hear a buzzing sound in the back and the lights in the front are blinking. I had the bulb and colorwheel replaced about 2yrs ago. Can someone please tell me what this could be..



Answers :

Check weather the fan is not working which the cause of shut down.

Repair Help & Product Troubleshooting for Flat Panel Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

I have a Samsung HLT5076S DLP Tv. I watched it this morning and when I came back home I tried to cut it on but no picture or sound. I hear a buzzing sound in the back and the lights in the front are blinking. I had the bulb and colorwheel replaced about 2yrs ago. Can someone please tell me what this could be..


Check weather the fan is not working which the cause of shut down. ... Samsung HL-T5076S 50 in. TV

I have a mitsubishi dlp WD-65733 and it went out on me a week ago. when I power it up i get only the green light above the timer. when i hit the reset button in the front i hear a click in the back and the green timer light starts blinking for about 30 seconds the it powers off. I do not get any lights above the status or lamp. i have replaced the bulb before about 1 1/2 years ago. could this be the bulp again? when i replaced it before i had an orange lamp light but not this time.


Hi,It seems problem in power supply board that got few electrolytic capacitors leaky and causing problem. It does not look like lamp issue.Let me know are you handy with electronics stuff repair and can replace parts in circuit board? ... Flat Panel Televisions

My Hitachi 50sv810 tv often pops on and off with a loud popping sound and this time it went off, and i turned it back on and i could get no picture just a loud screeching sound every few seconds yet the lights on the front of the television are still blinking. what could be wrong with my television?


Are u sure it''s a 50sv810? ... Flat Panel Televisions

Samsung dlp made a popping sound now only have sound and tv turns itself on and off. All 3 lights on front were flashing. I took out lamp...it looks fine....thought I would put it back in when I noticed pieces of glass in the tv directly in front of where the bulb faces. Is this the color wheel? Could it of shattered?


You have a good eye, that would be the color wheel. You can call samsung at 1-800-samsung to find a repair center, it is not an easy job to replace it yourself. ... Flat Panel Televisions

73" Mitsubishi DLP. turned on the tv and got only sound, no picture. after a minute it would shut down and red light would pop on the front. replaced bulb and hooked it back up. now it turns on but af


Try cleaning the little fans that keep the bulb cool, the temp sensor will shut it off so not to damage the bulb , the winning sound may be the fan going bad or not working like it should. ... Standard (CRT) Televisions

Hi, I have a Sony kdp-57ws550 that had a 10 blink code. I took the d-board out, r8051 looked burned up, I replaced that, hooked everything back up, turned it on and now it sounds like its coming on, does 4 blinks and turns off. Does anyone know what this could be?


Check IC5101 on the D board vertical deflection has stopped. The 4 blink is indicating vertical deflection has stopped. ... Sony Grand WEGA KDP-57WS550 57" Rear Projection HDTV-Ready Television

Lg 52sx4d turned tv on-picture but no sound. shut tv off, unplugged for a few minutes, plugged back in and turned on-nothing. white lights scrolled bottom to top for a minute then top light went red and second light blinked red a few times. replaced bulb, nothing changed. no fan sound or clicking noises, just the light sequence.


Hello\015\012Power supply switching regulator board inside your LG TV is faulty. There are more than 8 regulated supply rails emerges from that board, after switching regulation, which will enter to different sections of circuits in your Tv. ... LG 52SX4D 52" HDTV

I have a 43 inch samsung DLP tv 2004 model# HLN4365W, I was getting a black and white picture, so i replaced the color wheel which was broken. It worked fine for a couple of days then there was no picture, i have sound. The lamp is working - no errors on front panel. If i look in the back of the tv i can see light coming out of the lens, but no picture on the screen. What could be the problem? Thanks


... Samsung HLN4365W 43" Rear Projection HDTV-Ready Television

I have a 43 inch samsung DLP tv 2004 model# HLN4365W, I was getting a black and white picture, so i replaced the color wheel which was broken. It worked fine for a couple of days then there was no picture, i have sound. The lamp is working - no errors on front panel. If i look in the back of the tv i can see light coming out of the lens, but no picture on the screen. What could be the problem? Thanks


No picture on a DLP when you can see the lamp is working is ALWAYS the DLP chip. BECAUSE you recently replaced the color wheel, i suspect that the LVDS/data cable to the light engine was not plugged in well and has come loose. I suggest checking and ... Samsung HLN4365W 43" Rear Projection HDTV-Ready Television

I have a Vivitek RP51HD41-A TV. Yesterday it made a pop sound then sizzling and the picture went out. I unplugged it, the plugged back in. No picture. Looked to see if lamp burned out but small green light is on inside. The front lights blink on and off orange. No message calme up to replace the lamp like in the past. Any suggestions?


Hi ryser,\015\012\015\012Pop sound is coming from the parts either on the ballast board(lamp's driver) or power supply(ballast board supply). It means that you're bulb is not the issue that's why you've not encountered the led lamp indicator. C ... Vivitek V37655 56" DLP TV

I replaced my bulb & it still blinking& the bulb will not light. And I made sure the switch in the back was up! Help,!


Check to make sure it is getting voltage from the ballast and if as I suspect has a color wheel that it is intact--remove lamp and look at it. ... Projection Televisions

My LG 52sz8r tv wont turn on. It suddenly stopped working. I presumed the bulb needed replacing as the bulb light was on before it stopped working, but did not come back on. however after replacing the bulb the problem remains. After pressing the power button the red standby light comes on, but when i try to operate the tv the standby light turns green and blinks about every second and nothing happens. I can hear a small click in the unit a few seconds after trying to turn it on. any suggestions


... Flat Panel Televisions

My TV turns on shows picture but shortly later cuts off. During the time while its on I can change channel, inputs but I get no sound. I took panel apart and found a blown bulb. I changed the bulb and still the same issue. First I was getting 13 blinks and after replacing 1 bad bulb it only gives me 8 blinks. Please help me solve this issue and fix my TV.


Please tell me whats the make and model of the tv so that I can tell you what the 8 blinks error code means ... Flat Panel Televisions

I have a Mitsubishi wd-52525 HDTV... Picture went out and red indicator light came on. I shut off the tv and turned it back on and it made a crazy sound.. I shut it off and replaced the lamp. After installing the lamp I tried turning the tv back on and the green indicator light came on a blinked approximately 6-7 times and shut off and would repeat along with a crackling sound from the speakers. The green light is not continuous and you can not shut it off with out unplugging it from the wall. I


You must test the power supply inside. See if the fan is working, and thermostat is ok. test it.God bless you ... Mitsubishi WD-52525 52" Rear Projection HDTV

Have a PT50DL-54J . Just changed the lamp and it will not start back up.Just a blinking green light. For the past while theTV has been displaying "replace lamp" but I couls still watch it. Then one day it would not turn on at all. Same green blinking light. I thought it was the bulb because of the error message saying so. I changed the bulb and its THE SAME PRWhat's wrong. Does it need to be reset somehow or something or am I SOL


... Panasonic PT50LCX63 50" Rear Projection HDTV

Problem with mitsubishi wd65737. thought the bulb was bad, bought a new bulb replaced it and now the screen doesnt want to come on. light on the front of the tv turns green, you have sound but no picture then the tv turns off the light on the front is now steady red. resetting the sytem worked yesterday but not today.


Lets try an error code operational checl. Unplug the tv and plug it back in. With the standby LED on press and hold the MENU and DEVICE/INPUT buttons for 5 seconds. The LED will flash a certain number of times pause for a while and blink again. Count ... Mitsubishi WD-73827 73" HDTV DLP TV

I replaced my lamp on my 60inch hitachi 60v710. The lamp indicator light had never came on, but my picture was slowly starting to become dim. After replacing the bulb my lamp indicator light is now on, it blinks a couple of times and the t.v. Shuts off. We have checked to make sure the lamp is in properly. we have even taken the old lamp, t(that was working when it was removed) and put it back in and still the lamp indicator light blinks. On the rear of the tv right behind the lamp is a mother b


... Hitachi Projection Televisions

My Sony Trinitron TV 1999 (KV-32V42) made a strange popping sound and I lost both the sound & picture. When I turn it back on, the two red lights on the front of the TV(standby/Timer light & Stereo light) come on, but no picture or sound. The red standby/timer light has been blinking now for four hours. The instruction book doesn't mention the standby/timer light. I have tried unplugging it and turning it off and on several times, but nothing helps. Still no picture or sound!


Hi,\012\012The\012Standby/Power light of the TV blinks when there is any internal malfunction in\012the TV. The self-diagnostic function of the TV will cause the STANDBY light to\012blink or flash when the television dete ... Sony FD Trinitron WEGA KV-32FS100 32" TV

My Sony Trinitron TV 1999 (KV-32V42) made a strange popping sound and I lost both the sound & picture. When I turn it back on, the two red lights on the front of the TV(standby/Timer light & Stereo light) come on, but no picture or sound. The red standby/timer light has been blinking now for four hours. The instruction book doesn't mention the standby/timer light. I have tried unplugging it and turning it off and on several times, but nothing helps. Still no picture or sound!


The tv has a high voltage problem, and the probable cause is the flyback transformer has become defective, it's job is to generate the high voltage to energize the picture tube and along with the video circuits produces a pi ... Sony FD Trinitron WEGA KV-36FS120 36" TV

Problem with Samsung HLS4676SX/XAA Television My samsung tv will not power up, timer light is blinking The timer light on the front of the tv is blinking and the tv powers on, there is sound and then


... Samsung HLS4676SX/XAA OEM TV Lamp

I have the Sony WE655 and I heard a "POP" sound and the TV went off? The RED light POWER/STANDBY blinks 5 times. I replaced the Optical Block & lamp about 2 years ago. What could be the problem


... Sony KDF-42WE655 Television

RCA HD50LPW Projection DLP TV. Replaced bulb, still no picture. Has sound and after startup, the green light on the on/off button will blink 5 times every 15 seconds or so.


... Projection Televisions

I have a 60inch mitsubishit.v model wd-60638 i just replaced the bulb because it had no picture i have sound but now i noticed that it is blinking a sequence of six red light blinks and one orange blink and no picture and turns itself off afterwards please help me


... Mitsubishi WD-60638 DLP TV

Have Samsung HL-S466W- Replaced Lamp (OEM), Replaced Color Wheel, Replaced Ballast. Currently the fan turns on for a few seconds, all three lights blink: Timer,Lamp, Standby. No Video or on screen sound. Lamp doesn't power on, nor can I really hear if the color wheel is activating. What can I troublshoot next before investing more in this model? Already verified the wires are correctly in place and the back door panel is tightly secured to activate the power switch.


... Samsung HL-S4666W Television

I have a 52HMX84 DLP projection Television. The LED indication is... Green blinks at 0.3 second intervals - red light solid. Manual indicates the lamp is not working correctly so I ordered a new one and replaced it. The exact same result. In the past, the bulbs popped and it was obvious the bulb was used up but in this case both the current bulb and new one look fine. What could it be and is it worth fixing?


Hello,I think this time, your TV is having a power problem.The issue you describe is consistent with a power supply board issue. This is the board where the AC goes to. This problem may have occurred as a result of irregular p ... Toshiba Projection Televisions

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1725 seconds