Having problems with your Projection Televisions ?

I have a HLR5656W Samsung. This question was asked before, but I never saw an answer. I have the same issue. "I have tried two different devices on the hdmi input and neither work. I am trying to find the part number for the circuit board that contains the hdmi input. Since I see no way to resolder or repair the connection I assume the board needs to be replaced? I was unable to get a part number over the phone. I was hoping to avoid taking the tv apart to get the board out and find the number

Answers :

You need the service manual and you need to look at the exploded view to identify the board next
\012go to the parts list if the part number isn't in the exploded view.

Repair Help & Product Troubleshooting for Projection Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

I have a HLR5656W Samsung. This question was asked before, but I never saw an answer. I have the same issue. "I have tried two different devices on the hdmi input and neither work. I am trying to find the part number for the circuit board that contains the hdmi input. Since I see no way to resolder or repair the connection I assume the board needs to be replaced? I was unable to get a part number over the phone. I was hoping to avoid taking the tv apart to get the board out and find the number

You need the service manual and you need to look at the exploded view to identify the board next\012go to the parts list if the part number isn't in the exploded view. ... Samsung HCM5525W 55" Rear Projection Television

For some time now, my Samsung DLp rear projetion tv (HL-R4667W) gives a "no signal or weak signal" on all inputs. After being on for a perdiod of time, which seems to be lengthening, it will pick up the HDMI input. It still is hit or miss with other inputs, such as Component or RCA. I don't know much about the inner workings of TVs, but am assuming this is some type of input board issue or something. What is the problem and what kind of part would fix it? thanks.

Yes it is a board malfunction. The source of the problem in your case is the "Digital Board" which contains all the tuners and video processing circuits. Replacing it would resolve the problem. If you would like to fix it yourself, take off the back ... Samsung Flat Panel Televisions

Okay so I have a 50x39 inch RCA GEMSTAR Guide PLUS Gold HomeTheatre projection TV. I don't really know what the model number is, I am assuming XX15343-82A. First off, the picture is skewed and warped, second off it's dimming. I understand that the bulbs char up and go out over time, which is all well and good but I really just need to find out where to buy parts from and if this is the actual model number.There is another number as well xx15559-030. I have tried manual convergence, everything ar

Inside, there is a mirror glued to the back of your tv, the lapmps shine onto this, then it's reflected onto the front screen, it gets dusty, mine did, and I took the front off the tv and cleaned that mirror, VERY carefully. sometimes the mirrors com ... RCA Projection Televisions

Signal board Can you purchase just the HDMI input for signal board JK09186? If so where, and can I please get the part #?

There is a lot to consider here. First, does this TV have an input for HDMI? If not...the best picture is for supervideo. If you do have an HDMI port and you are trying to fix this....you may have to replace the signal board. It is extremely difficul ... Hitachi Projection Televisions

I have a lg42pc3d plasma tv. its about 5 yrs old has worked just fine till last night the picture went out. Sound works but no picture. Have been on line and the consensus seems to be the x and/or z sustain boards and maybe also the control panel. Wanting to know if that is the problem and how do i check. Where are the best places to find the parts i need and the part numbers? thx

Yes usually the x and y sustain boards go. Not always with both fail, but they communicate with eachother...this is why replacing both is "good practice." You can check shopjimmy, ebay and encompass parts for parts online. Just order new replacements ... LG 42PC3D 42 in. Plasma Television

Lightning strike to the house, HDMI inputs will not work now. Did the HDMI board get fried? How do i replace/fix this?

... LG 47LG50 47LG50 47-inch 1080p LCD HDTV Refurbished Mfr P/N 47L

It is an input board for a philips dvdr3455H/37 that I need to replace and can not find that part anywhere.

... Flat Panel Televisions

I have a Panasonic Viera 65" P65S2. After a month and a week the tv shut off, and when i tried to turn it on all i got was 7 blinking lights. I contacted Panasonic and a service tech was sent out to my home. The service tech said that i needed a SC board and he would order it immediately. It is now over a week and my brand new tv is still not working. I am now told that the part is on backorder for 2-3 weeks. I find this totally unacceptable and would like to get your view. Thank you.

I agree, this is not a good thing. A brand new TV should not fail 5 weeks into its life. Unfortunately, since the store won't take it back, you're stuck dealing with Panasonic's warranty group.Having to wait 2 - 3 weeks for a part is cr ... Panasonic VIERA TH-65PV500 65 in. Plasma Television

I have a 62 inch panosonic th-65phd7 i need a new signal input board with hdmi and scart, where can i get this from

Tried to check this site www.shopjimmy.com ... Flat Panel Televisions

I need to replace a Diode on the Power Supply Board for my HLT6156W Samsung DLP,the part number of the board is BP44-01002C the location of the Diode on the board is marked D805.I need to know specs of that diode ao a part number.Thanks Bob

... Flat Panel Televisions

I have a Panasonic Plazma TV, TH-46pz80u is the Model Number and the LED light blinks 8 times. I just need to know which certain board to replace. I have already opened the back of the tv to inspect where each board is mounted. I am having trouble getting the details just for my model type. I am aware that alot of the tv's share the same boards. I just need a little more guidance and I would like to get the troubleshooting spec manuals to refer to for this repair.

Hello,The power supply board is dead, do you know basic electronics' and soldering? Most of the times, the power supply board just have dead leakages gases capacitors.These capacitors always bulges up on it top,or puff up on it top.Replac ... Panasonic Viera TH-42PZ80U Plasma TV

My HDMI inputs dont work on my VIZIO gv47L FHDTV10A what board do i need to replace

Most likely you will need to replace the main board. That model # uses several different main boards. The part # will be listed on the board. Make sure you order the exact part # of your old board. ... Flat Panel Televisions

Note that I now live in the Philippines and I need two parts ASAP for my Toshiba 40E200U1 40"inch LCD. (parts and service is very difficult here!) The part numbers are: 1. A6069H (SK031) IC 2. 120 K Resistor Note that I have a friend here who can install these two components so as to avoid replacing the entire power suppy circuit board. Please advise if you can assist. If necessary, please provide a quote for the entire circuit board if the two parts a

... Toshiba Flat Panel Televisions


There is no repair other than replacing the main board to your TV. Just contact the nearest authorized service centre to get it repaired. ... Panasonic Viera TH-42PZ80U Plasma TV

BLANC SCREEN My 42" RCA LED47A55RS just went puff.. when I was watching a video. I don't get any picture. The screen is blank. If I leave it on for while it gets about 6 vertical white lines for about 1 minute and then its blank again. No sound either. Check for bad or burnt capacitors and other parts but everything looks good. The only board that smells bad is one near the speakers, lower part, a small boatd that has to connections going to the LCD screen. I checked for the part number but

... RCA Projection Televisions

Mitsubishi 65 inch rear projector TV with remote. Model WS65807. HD ready, but not HD. Has failed circuit board, part number 930B866001. This board regulates audio and video. Part no longer available from Mitsubishi. Conn's refuses to service it. TV otherwise in good shape. Is it worth the trouble of finding a replacement board?

... Mitsubishi WS-65807 65" Rear Projection Television

I have a Sharp LC-19DV12U with a defective D501 labeled 10E241. It is located on the power supply pcb connected across the 120v input to the board. The board does appear to use conventional identifiers (c=capacitor, r=resistor, t=transformer) so I would expect it to be a diode although in fact it looks like a ceramic disc capacitor. Unfortunately, I don't have a tech manual or a parts list. Can anyone help with a part number?

... Sharp LC19DV27UT 18.5 in. LCD TV/DVD Combo

Reading the convergence issue my issue seems to be in line with the IC chips going out. Is the a way to get the part numbers I would need or possibly need? I live in Mexico and to get all the pieces here could be a challenge. My TV is the Pioneer Pro-710HD.

Www.tvrepairworld.com should be able to assist with the convergence ICs and they do ship to other countries. ... Pioneer PRO-710HD 64" Rear Projection Television

Which board on the Hitachi P42H401 controls the HDMI inputs. I need to replace that board and need to know which one it is?

... Hitachi P42H401 42 in. Plasma HDTV

I need the schematic for a power supply part number bn96-03060A- I need to know the capacitor values and voltage ratings at the following locations on the board- CM851,CM852,CM860,CM858

... Flat Panel Televisions

Main Board? Had issues for years, where I had to unplug once in order to get the tv to turn on. Then one day, it would not turn on. The TV shows a quick lightening of the screen like it is going to turn on, but nothing appears. It also clicks once or twice. Took to a repair shop and they diagnosed with main board failure and refused to fix due to lack of parts. Do you think it is the main board and where would I find one? I am pretty handy, do you think I could DIYthis job?

The fault must be due to a main board fault. Generally, it will be impossible to get this board repaired. A replacement must be done. Most of the parts in this board are not available by local electronic spare part market. After power ON, there sh ... Proscan 47LB45H 47 in. LCD TV

When I press the power button, the power on light on the TV lights up 3 times followed by a weird sound and nothing else happens. The TV repair shop says I need all of the following: Deflection board: 18405415652866 HV Board: 18606432212450 CRT Board: 184184372415 for a total of $500, can I trust his recommendation and where I can get these parts with free installation instructions?

That seems the whole lot of the set and it is not wise to spend this sum for a suspected complaint. if you are able to track the board and get to component level diagonises it will save a whole deal than to spend this sum. I think you need to che ... GE D52GW12 52" Rear Projection HDTV-Ready Television

The picture on the screen is flickering white. It happens on all inputs. I called support and they said the light engine was going and the part was L1798-60003. This part is anywhere from $900-2600. I did find a light engine w/Color wheel Part 00.L6101G001 for $330. Would that be enough or is the whole engine assembly needed?

... HP Md5880n 58 in. HDTV

I need to replace the AVR board on a Mitsubishi mge 5800. Part number is KYC31002283, will a KYC31002280 work?

... Projection Televisions

Samsung SyncMaster 305T One-half of the screen (the right-hand side) gets dark. It turns black and I can barely read the text in a document. This problem is NOT consistant. In other words, some of the time the right-side lights-up and looks normal. I have read some of the other expert answers and it seems the flourescent back-light bulb is the problem. My questions: 1) Where can I find the part number for this bulb and who sells them? 2) Is there another part in the circuit that may be the

This problem is, as you suspected, almost certainly a problem with your monitor's backlight.\015\012\015\012However, there are a number of possible causes for a backlight problem besides a bad fluorescent bulb. The bulb must receive a goo ... Samsung SyncMaster 305T 30 in. LCD Television

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.2497 seconds