Suggested Questions/Answers :
It is recommended you read all this kind of situations
Samsung plasma PN42A410, First my tv would turn on for only about 10 seconds, the screen would turn grey as if starting then it would turn black and the set would shut itself off,2 days later it stays on, the sound works fine, but the picture looks like moving Monet master piece, mostly black and white and few colors, very psycadelic but not what I want. what's the problem
Samsung Flat Panel Televisions
I have just put$600.00 into this TV. I had it home 2 days and it is still messed up. The repairman now tells me that I need 3 picture tubes, and they are $175.00a piece. Is there somewhere I can buy these for less? If I had known it would have cost me this much, I would have replaced it.
When you turn it on, it looks like a peacock, the colors are red, white and blue.
You don't need to replace the tubes you need to replace the Fluid in the lens that are on top of the projection tube contact me at [email protected]
for more help on changing the fluid on this setBig Screen TV & Electronic Repair Charl ...
Philips Magnavox 9P6034C 60" Rear Projection Television
Tv would not come on at first. so would unplug for a little while and then turn back on. would come on eventually but with a messed up screen, green lines, etc. after it warmed up, and you would turn it off during a commercial and back on, it would eventually work its way clear... sometimes immediately.. also would hear noises like... so we took it apart and found pieces of glass in the color wheel. cleaned it all out and it worked perfectly UNTIL one night it made a huge POP and blew the bulb.
Samsung HL-R6167W 61" HDTV
Vizio GV47L...when i turn on the tv, the screen stays black. The vizio light turns white and it makes the click noise like normal but after a minute of it doing nothing the light turns back to amber. I can turn it on and off using my remote. I read other problems where people had to unplug there tv to turn it off. Mine will turn off. Would the problem be the power supply or the motherboard. The slave inverter was making a squeeling noise and i replaced it like 2 months ago.
Flat Panel Televisions
I have a RCA L26WD26D Flat Screen TV. When you turn it on it will say "please wait". This lasts for 30 seconds or so. Then that goes off and the screen turns black with some sections turning white. It will vary the back and white and will stay like this for maybe 20 minutes. Then it will start showing vertical colored lines. They will change also and eventually turn back to black and white. After leaving the TV on for about 5 or 6 hours, the picture finally shows up and looks fine. So now I'm af
Hi coefremont,\015\012\015\012This is an indication of out-of-regulation in the power supply section. The very\015\012common caused of this fault is the leaky\015\012elec ...
RCA L26WD26D 26 in. LCD TV
I have had my Sanyo DP46848 for 3 years now. Shortly after moving about a year ago my TV began to mess up. When I first turn my TV on the left side of the TV is mostly black and the picture that you can see on the left side of the screen has very bad ghosting effects. The blackness seems to be in 3 horizontal bars covering the whole height of my TV. The right 1/3 of the TV looks normal and the right side has never looked wrong. The black bars will disappear starting at the top bar and final
Why not return the television back to where you brought from that they rectify the problem. ...
Sanyo DP46848 LCD TV
I have a toshiba 40rv525u. Turns on. Screen looks weird. Right side of screen lags the left side kinda like the right side Takes time to charge up or somethibg. Black fade gradient down the middle. Looks like screen is shot?
It sounds to be a back-light fault. Contact any service technician. ANY PERSON ATTEMPTING TO SERVICE, FAMILIARIZE HIMSELF WITH\012THE CHASSIS AND BE AWARE OF THE NECESSARY SAFETY PRECAUTIONS TO BE USED WHEN\012SERVICING ELECTRONIC EQUIPMENT CONTAIN ...
Flat Panel Televisions
I have a Samsung HLP 4674w DLP. The picture started to lose color and look like a negative image. Then it would get scrambled and eventually go out. Powering on and off sometimes fixed it, but only temporarily. Sometimes it would also turn off and on by itself. I thought it may be the lamp so I replaced it, but it did not fix the problem. Next I thought it may be the color wheel so I replaced that, but the problem did not go away. Also when this happens the Power switch will not turn the TV off.
You need to change the lamp out, it builds up a internal resistance, and pulls your voltaged down, it will get to the point where you TV will not come on at all. Replace your lamp, you can get one at ...
Samsung HLP4674W 46" Rear Projection HDTV
PURCHASED SAMSUNG LCD TV MODEL LN40A630M1FXZA BACK IN DEC. 2008,GREAT TV TILL ABOUT TWO MONTHS AGO. TV WOULD COME ON GREAT FOR PAST TWO YEARS, THAN ALL OF A SUDDEN WHEN WE TURNED IT ON, SCREEN WOULD BE ALMOST BLACK (SEE PEOPLE,BUT NOT CLEAR AND DARK) EXCEPT FOR RIGHT 1/3RD SIDE, IT WOULD HAVE GREEN/RED COLOR FOR ABOUT TWO MINUTES AND THEN PICTURE KICKS IN, NOT COMPLETLY CLEAR AND STAYED DARK FOR ANOTHER 10 MINUTES. THEN PICTURE WOULD ALL OF A SUDDEN KICK IN LIKE WHEN IT WAS NEW. AFTER ABOUT A MO
Hi,I am sorry to hear regarding the trouble. I understand the concern, however this is a common problem with most of the Brands. I agree that Samsung customer service should accept these facts and should be willing to help the consumers. ...
Samsung LN40A630 40 in. LCD TV
I have a toshiba cinama series big black old school television. Now when we turn on the tv screen it just goes black w... as a quick fix i used to be able to hit the tv and the screen would come backand stay on...but now when i hit the tv on the back the screen will come back on for a few seconds then go black again and not stay on. I have a feeling something is loose in the inside of the television... When i remove the back panel what should i look for to tighten? I am a single mother with four
Toshiba 55H70 55" Rear Projection Television
I have a Samsung DLP HLN 5065W and recently the TV started to get Horizontal Lines in it with a 2 inch black horizontal line across the TV and the bottom half you could see the picture and the top half would look like it was rolling. Occassionly, you would see some very light yellow patches on the screen. Any ideas what this could be?
If your TV looks 3D, warped, or distorted it likely has a convergenge problem. If however it just looks dull, washed out, redish, greenish, or blueish or if it looks like objects on the screen have halos the fluid in the lens has soured.Y ...
Samsung HL-R6168W 61" HDTV
Hi, I have a lg 37lc2d. I push the power button and the light turns green then after 5 sec, it turns off(black screen). Is there any way I can fix it? Or do I have to go to a repair shop?
Looks like a lot of people are having the same problem Im having these TV's need to be recalled.
You will need to take this television to get it repaired. This problem is so common that I expect it to happen to all flat panel tvs and urge people to keep extended warranties until they are ready to purchase another television. The repair person is ...
Flat Panel Televisions
Looks like your are the source for all things Samsung...I have a Samsung HL-R4226W that all of sudden started making that loud vibration/humming noise, and the picture started flashing pale, off color images of the show mostly in black and white. I shut it off before anything popped or stopped. Is this likely the color wheel? Any way to diagnose this for certain before I buy the part? Thanks in advance for the help - much appreciated.
It is definitely the color wheel. The flashing images and the wird colors confirm it. Replacing the color wheel should resolve the problem. As for the loud whirring noise, its due to wear and tear in the motor that spins the wheel. ...
Flat Panel Televisions
Hello, would like to ask about my hanspree tv, 2 weeks ago the power just stopped so i opened it up (left it 24hrs with no power and had ground strap etc) and 2 capacitors had blown. I changed them and the tv was perfect again. Now 2 weeks later i turned on the tv and it had the splashscreen then went black after 1 sec. I heard audio the first time then tried again, turned it on same problem but with no audio. have any ideas ? thanks
The backlight controller is most likely faulty. It could be bad capacitors again, or the inverter board itself may need to be repaired - possibly faulty inverter(s). Try shining a torch close to the screen and see if you can see anything on the scree ...
Hannspree HANNSwing 32 in. LCD Television
Our 2004 rca tube tv screen went recently went out on us. When you turn on the power, you can hear the tv and you'll only see a blue line in the middle of the screen that shrinks and fads out and the tv eventually turns off completely. We cannot see anything on the screen besides the blue line and only for about 3 seconds. We would like to know how to fix this in the cheapest manner possible. I looked online before and it said something about the tact switches possibly needing replacement?
Hello\015\012It is reparable problem. You see a blue line across the middle of the screen I thinks and posts this solution. The fault is due to the absence of vertical scan. In your set, there is an IC used for this purpose, and it has been d ...
RCA TruFlat 27F520T 27" TV
I have Sony's 43 inch Projection TV, its model no is KP-ES43 ME1. Problem with it is that it has lost Blue color from its pictures. Anything that is of Blue color turns into different shades of Green color. But one important thing which i would like to share is that when we turns on PIP (Pictue-in-Picture) mode, images on the right side of the TV screen looks absolutely fine but Pictures on the Left side of the screen still have the same problem. I want to know what is the real problem and its
Sony Projection Televisions
I have a Samsung LN-s2651d LCD tv that black screened on me and I don't know if the sound works because I have the internal speakers turned off... I use 5.1. I have been told that it is the t-con board and would like to know if there was any way to determine this with some certainty before I go buy the part. Or, could it be something else besides the t-con board?
Samsung LN-S2651D 26 in. LCD Television
Magnavox 32MF605W/17, flicks, no picture.
Firts there was no picture, LED stayed amber. I opened it up, replaced 5 blown caps on mainboard, now when TV is turned on, LED is green, screen flicks white for half-second, then goes black, LED stays green. Does it look like inverter board is bad, can't light up CFLs?
Philips Flat Panel Televisions
Whenever i turn my tv on it looks like its cracked but it isnt the screen is plastic and all you see is diffrent colored lines and black screen
Sounds like the bulb is gone depending on the tv there about 250 to replace ...
Flat Panel Televisions
Hi I have a toshiba dfs 100 hyper progressive rear projection 67" tv, model 61A9UA and when i turn on the tv rows of what look like are black small rectangular boxes appear. Its still there wether i play dvds or just watching tv. The picture and sound are very good except for these shapes. My remote doesnt have a button marked cc or closed csptioning that i have seen being discussed by others , so im just wondering what we can do. Thanx for any help at all Donz
Hi i have a Toshiba Dfs 100 & hyper progressive i hve no idea what wrong with my tv.. when i turn the on button the box down the bottom its on nd showing blue color..**** nothing showing on the screen.. pls help me thnx ...
Toshiba Projection Televisions
When turning on TV Samsung 52 , 3 years old it starts clicking on/off for about 30 min. It looks like trying to start but cannot. The base line (blue) goes on/off , the screen is black, no sound, but after around 30 min it starts and is working from this point on
It is really easy to fix yourself if you can use a soldering iron. There are kits available at http://www.karmtec.com and specifically for this TV ...
Samsung LNT5265F 52 in. LCD HDTV
Toshiba 40rv525rz shut off while playing xbox. When it shut off i could see a small white line on screen then went black. Tryed to unplug it for 5 minutes and would not turn back on. All it was doing was flashing the lit toshiba emblem up and nothing else! Talked to a couple of people and they told me it sounds like a power supply problem! So opened up the tv and saw that the power supply had a burnt resistor and there was also sut on the backlight inverter so i ordered a new power supply and in
Toshiba 40RV525R 40 in. HDTV
I have a samsung ps42s5h. When I turn the t.v on the picture quality is all pixulated and looks like the contrast is really bad. Is this a common fault and what would the costs be to fix the T.V -Thanks
Samsung PS42S5H 42 in. HD-Ready Plasma Television
Sony kp-51 ws500 rear projection tv. when turn on tv there is 3 duplicate images overlayed...green, white, red. looks like I am watching an old school 3d movie, but without the glasses. i already took the panel off the front, accessed the black cover, and adjusted the 3 color screws on the bottom row. no luck. any ideas ?
Hi,\012\012The problem is your convergence circuit board gone bad. This is commonly caused by shorted/open IC on that board. First try to spot if there is a bad solder joints and resolder it. If nothing replaced the convergence IC. Also check t ...
Sony Projection Televisions