Having problems with your Flat Panel Televisions ?

Samsung LNR328W makes clicking sound when plugged in. Replaced power board, still does same thing.


\015 Replaced power board still does same thing. Lcd sounds like a relay turns on power then turns back off after about 3 seconds.\015

Answers :

Repair Help & Product Troubleshooting for Flat Panel Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

Samsung LNR328W makes clicking sound when plugged in. Replaced power board, still does same thing.


... Samsung Flat Panel Televisions

I have a Sanyo DLP 50747. When I turn it on It clicks off in about 10 seconds. I read online to try replacing the sub-power board(part# SJ-B10N2010A) and if that does not work then replace the power supply board (part #LJ41-05246A) both of which I purchased from Shopjimmy.com. I replaced both and it still does the same thing. Can anyone give me any other suggestions?


Sanyo plasmas have LEDs on the boards that can be used to identify the source of the problem. Are LEDs on any of the boards lit> If yes then which ones? ... Sanyo DP50747 50 in. Plasma TV

My samsung tv wont turn on it just clicks i replaced the main power boaRD AND STILL SAME THING


... Samsung SP-R4212 42 in. Plasma EDTV

TV has worked just great since purchased in 04. Sat down this morning, grabbed the remote and nothing happened. I replaced the batteries in the remote, tried it again and nothing. I tried the manual power button on the front of the TV and still nothing. I tested the power outlet and it works fine. As I plug the TV in, I hear a soft click as if it is trying to power on but still nothing happens. I pushed the reset and it makes a soft click but still no picture or sound. Could you possibly help


Hi. This is an all too often occurrence. The TV's manufactured in the earlt to mid 1990s relied on an inferior set of capacitors in the power supply and mainboard components. They should have lasted about 25 to 30 years, but most are on ... Hitachi 57F500 57" Rear Projection HDTV-Ready Television

I have a Samsung LN40A530P1FXZA. It will not power up. I get 2blinks followed by short quick blink and then it repeats itself. I have replaced the power supply board and also the main board, and it still will not work. Does anyone have any idea as to what is going on with this tv? I wish I had an error code book for this tv, but I do not. The only thing I have not replaced is the TCon board. Need someone's help.


Try to download the manual on www.retrevo.com to see the error code for sure..Before you decided to replace t-con board please refer to the manual first,,but there is the possibility that t-con was faulty.Hope it helps..don't forget t ... Samsung LN40A530 40 in. LCD TV

Toshiba model 42hp66 Plasma flat screen Problem No picture or sound. Pushing on button 2 clicks are heard A slight hum is heard at the Z SUS board. Green power light is on (power light is red when unit is off) Slight clicking sound from Y SUS board. Now that I replaced the open Fuse. (Fuse 4AH250VP Found open on Y SUS board as looking at rear the Fuse on the left). Still no operation?


Do you still have the clicking noise? The tv turns on but no response issue is associated with the main A/V board 99% of the times if there is no clicking sound ... Toshiba 42HP66 42 in. LCD Television

My problems with samsung pn50b450 is it clicking on the power board and will not power on.The capitors all look good.but i changed them any way.I still did not work so i ordered another board and it is still doing the same thing..What could the problem be?


... Samsung PN50B450 50 in. Plasma TV

Samsung lnt4665fx xaa video prolbem apperas main board has been zapped visible burn marks on hdmi port 2 blue light under samsung still comes on and red light flashes and relay clicks but no audio or video replaced caps in power supply did not help should the main board be replaced? should the main board be replace any suggestions would be helpfull thanks


... Projection Televisions

Samsung pn50c450b1dxza clicks and won't turn on. I have relaced the power supply board twice and does the same thing. Replaced the y buffer board and does the same thing.


... Samsung PN50C7000 50 in. TV

Polaroid FLM-2634B model number 2700 had a ppwer problem. It blew fuses. I replaced the main power board and it was working fine, until it was on for about 20 minutes than the video goes blank, but the sound is still on as well as the power indecator (still blue). Is there any othe thing I can do to fix this?


... Polaroid Flat Panel Televisions

I have a baird x47dtv and we turned it on today but had no picture or sound. the blue power light comes on and flickers as it should on startup of tv,however we are still not recieving a picture. i have replaced the psu's approx 6 months ago so i know theres no problems there,but am unsure which part i need to replace as it could be 1 of three things. 1 it could be the main board, 2 it could be the power invertors or 3 the screen. any tips would be helpful


Tried to disconnect first the supply voltage of the inverter board and then turn on the tv. if the indicator stay which mean the inverter board would be the cause of shut off or the tv turn to safety mode. ... Flat Panel Televisions

I have a 50 inch plasma tv and it just clicks doesnt power on i replaced the y sustain board and the power suply board still nothing


Www.tvrepairworld.com has free tech support to help assist with whats actaully happening with the set. ... Samsung Flat Panel Televisions

I have an insignia 50" plasma ive had for about 2 yrs. There was a solar storm which caused the directv boxes to go out and the tv went out as well ans since then the tv won't power up. In the back of the tv we hear it click 3 times then it turns off by itself and it repeats the on/off process but nothing shows on the screen. I ordered and replaced the power supply board and its doing the same thing with the new board. Please help!


... Insignia NS-P501Q-10A 50 in. HD-Ready Plasma TV

Replaced the caps on power board still have the clicking


... LG Flat Panel Televisions

Panasonic tc-p50s2,had lightning strike near house and tv stopped working,no lights,no power,all fuses that i see test good, i replaced power supply and main power board and still same thing?


... Panasonic TCP50S2 50 in. TV

50pfp5332d got this tv not working. found no power when conected and decided to remove back cover. found blown PCB fuse and replaced it,turn the tv on and the picture came on for 10 seconds and when out but tv was still on since the logic board led was on,also noticed led on PCB started blinking. pull power cord off and then plug back in turn power button on and got picture for 10 second PCB relay clicked picture died and led on PCB started blinking again. what do you think?bad PCB or ba


Hello\015\012The power regulator PCB has some fault it it. It does not outs proper regulated voltages needed to the other PCBs in your TV. Normally Plasma TV power regulator PCBs are very difficult to repair, and PCB as whole should be replac ... Philips 50PFP5332D 50 in. Plasma Television

I have a panasonic th-42px70ba tv with the red light flashing 10 times after power button pressed, it clicks 3 times and the fault code start reading on the standby light. I have replaced the main power board and fault still there, any sugestions or a way I can diagnose the fault.


... Flat Panel Televisions

I have a panasonic th-42px70ba tv with the red light flashing 10 times after power button pressed, it clicks 3 times and the fault code start reading on the standby light. I have replaced the main power board and fault still there, any sugestions or a way I can diagnose the fault.


... Flat Panel Televisions

Samsung LN46A550 LCD power on/off problem again. Red light blinks 11 times, then clicks and then repeats the cycle. Only way to turn off is to unplud the set. Have checked capacitors and they are fine - no bulges. Replaced the power supply board and still have the same problem. What next?


Apparently this is a known problem with flat panel TVs made a few years ago due to bad capacitors in the power supply. This same problem appeared in computer mother boards at about the same time so that the capacitors went open or shorted causing pr ... Samsung LN46A550 LCD TV

Samsung LN46A550 LCD power on/off problem again. Red light blinks 11 times, then clicks and then repeats the cycle. Only way to turn off is to unplug the set. Have checked capacitors and they are fine - no bulges. Replaced the power supply board and still have the same problem. What's next?


... Samsung LN46A550 LCD TV

LN S4051 TV does not power on. Just makes a clicking noise. A similar symptom surfaced about 7 months ago, but replacing the capacitors on the power board resolved it. The problem has returned, but now all the capacitors show no visual cues as to being faulty.


Then your going to have to check them with a multi meter that can handle them. Find the bad one and replace. ... Samsung LN-S4051D 40 in. LCD Television

With the out of warranty lcd tv Sharp recommended a service in town and they after about 5 minutes determined that I need to replace the inverter boards. They wanted over $500 so I deciced to replace them myself. Installed the boards and after plugging in the power the unit "clicked" then when I pushed the power button it clicked again then aftger about 8 seconds clicked the second time and nothing. The led started flashing steady on-off-on-off. When I first plugged in the led was on solid, now


You still have a power supply problem ... Sharp LC-C4662U 46 in. TV

Samsung PN50B450B1DXZA will not power up. When I try to power it on, it makes a clicking sound and then nothing for 10-15 seconds and another clicking sound. The Red LED on the front flashes when it clicks but nothing ever appears on the screen. I removed the back of the TV and inspected Capacitors but do not see any that look to be bulging. When I try to power it on with the back off, I see a green light quickly flash on a logic board just below the power supply board. Are these clues helpful


... Samsung HP-R4262 42 in. Plasma Television

Emerson lc32oem2 power light blinks red. Just replaced power board. Still not working. What could be the problem.


... Emerson Lc32oem2

Heve a phillips 60pp9202 projection. i had convergence issues being that i couldnt move my red. i went in and replaced both ics but i forgot to check the resistors. a week later i finally got in there and found 2 bad resistors. the thing is i didnt take the convergence board out, nor did i unplug anything when i tested the resistors. i put the cover back on until i get the parts. now, for some reason, when i power up the set it will come on like normal, then you hear a click and the screen will


Get a complete kit from www.TvRepairKits.com and start over.They will walk you though the repair. ... Projection Televisions

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.2305 seconds