Having problems with your Flat Panel Televisions ?

My samsung LN37C550 led TV has no pwer & a burt smell. I took off the back & looked at the power supply board. The fuse is blown and the is a smoll component with the number CR 814 next to it on the board. Any idea what that is and can I replace it myself?



Answers :

If you have the components part number, you can certainly order a new component. However, I suggest you approach this repair with caution, as some of the parts you may have to replace can be very small. I would only attempt replacing the part if you have experience soldering. I've replaced several hundred SMT components in my day, but it's still difficult sometimes, and I still mess up occasionally.

Good luck finding your components! The fuse should be easy, but as for the CR 814, man, I can't find anything on google. You could try www.electronicwarehouse.com

Repair Help & Product Troubleshooting for Flat Panel Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

My samsung LN37C550 led TV has no pwer & a burt smell. I took off the back & looked at the power supply board. The fuse is blown and the is a smoll component with the number CR 814 next to it on the board. Any idea what that is and can I replace it myself?


If you have the components part number, you can certainly order a new component. However, I suggest you approach this repair with caution, as some of the parts you may have to replace can be very small. I would only attempt replacing the part if you ... Samsung Flat Panel Televisions

Fixya tv I have a Samsung LCD TV. Model Number LN40B530P7FXZA. In January this year my TV picture went out and only had sound. I replace the power supply board and all was well. Well the same thing happen again but this time one of the fuses on the board has blown. I replaced the fuse and as soon as I plugged in the power cord it blew. I did this twice. Should I get another board or is it something else? Thanks.


It sounds that there should be a dead short circuit in the power supply board's circuit. If you are not familiar with\012electronics, do not attempt to repair. \012Whether you suffer fatal electric\012shock. Instead, conta ... Samsung Flat Panel Televisions

I replaced the STK chips and one pico fuse that was blown on the input power board (the fuses and resistors near the STK chips are fine). I turn the power on, no screen and I get sound for 1 second, then it turns itself off. The power LED blinks 4 times, long pause then repeats. What should I look at next.


A blink of 4 times is an error code that there is no vertical deflection. There may still be a problem with the + or - 15 volt supplies. This error is generate when the vertical deflection pulse is missing. there might be a problem with ic 8003 ... Sony KP-51WS500 51" Rear Projection Television

AKAI PDP4206em fuse blown on zsus board, replaced fuse and turned tv on, there were sparks on the zsus board, I unpluged tv and pulled out the zsus board,,, i dont see any damage on this board, is this board fixable? or do i have to replace it?? if so were can i find one?


You will have to replace it. The reason the fuse is blowing can also be to X-sus board as the two sustain boards are capable of frying each other. They cost you about 170$ together. If you can get me the part numbers off the boards, along with any re ... Flat Panel Televisions

After reading several forums when my LG 42PC3D died, I went in thinking I had the answer. It would turn on, but then off immediately. The Y-sus board had a blown fuse. I didn't want to risk frying anything else, so I replaced the board rather than just replacing the fuse. When I disconnected the board, it would turn on and stay on. Now, with the new board, it powers up as soon as I plug it in (doesn't actually turn on, just powers up) but won't do anything. The screen is backlit with just


Y and X-sus boards should be replaced at the same time due to they way they communicate with eachother. I suspect that the x-sus is also faulty.Thank you! ... LG 42PC3D 42 in. Plasma Television

Da32m36 I have several blown components on a circuit board in the 'primary power' region of the board. As the components ion the baord only have what the part would be in a Bill of Materials (eg R6102 for a resistor) I don't know what the actual part is so that I may replace the blown components. A sevice manual or circuit diagram is what I need indicating what the parts are.


... Standard (CRT) Televisions

I am not sure what fuse to put in it, when I got it it had a 500 MA Ceramic 5x 20 250v Fuse blown; but when I replace it with the same it automatically pops. The board of the power supply has written on it that at F1 should be a 8.0 AH/250V Fuse. What fuse is it supposed to have, so I can replace it? Thank you Corey


On the body of the fuse or on the circuit board there will be a suffix T or F next to the value.T stands for Time delay or slowblow. If its marked F it means fast acting fuse.Now after replacing the correct fuse if it still pops you have ... Flat Panel Televisions

Blown fuse on TV, 2.5AL250V fuse on 42" Regza tv. I replace the fuse 3 times. Once i plug the tv in. The fuse blows. Do i need to replace the power board.


... Flat Panel Televisions

Hi, I bought a Vizio L32 HDTV10A that didn't power-up. There were charred components on the power board (an 8-pin IC with heatsink and 2 resistors). I replaced the power board, and the power LED then turned on (yellow) when power was applied. When the ON button is pressed, the power LED turns green for roughly 8 seconds and then the power LED turns yellow again. Nothing else happens. I checked many components (fuses, capacitor ESR, diodes, etc) on the main board and the master and slave inver


... Flat Panel Televisions

Need Help I have a sanyo DP50747 plasma no power I replaced the fuse on the main board location of blown fuse was F181 and 180 turned ov tv and worked great untill I shut it down at that time I heard


... Sanyo DP50747 50 in. Plasma TV

My zenith plasma 42w46x tv. doesnt show pic. the sound is there but no pic. I opened it up and founf out the the board on the right side of the tv(looking at it from the back) has two fuses, one of them is blown out, and when i replace it, when the tv is turned onit make a slight buzzing noise and the the power is turned off. but if i dont put no fuse in the box it turns on with the screen black.


Hi.The board you are talking about is called Z-sus. Its role is to sustain power to the plasma panel. If the Z-sus board fuses keep blowing, then the board is usually shorted, and the repair is done replacing the board.In some case ... Flat Panel Televisions

Power on constant red light but screen not turning on. Changed fuse checked components nothing burnt replaced fuse check power going to inverter board but still screen not turned on.


Have you checked the fuse? ... SNK Skyworth SLC1963A 19 in. LCD TV/DVD Combo

I have a 37 in element model number is elcp 0371. I woke up to it having no power so I did some investigating and found that the 15w fuse had blown. After replacing the fuse I have no sound or picture. I've checked all of the capacitors and they all look good yet nothing work except the standby light. Please help


... Flat Panel Televisions

250v fuse blown on ysus board replace fuse still no picture lg 42in plasma


... LG RU-42PX11 42 in. EDTV-Ready Plasma Television

I have a AOC L32w761. Dead set. I replaced the radial fuse at f901. Plugged it in and the fuse blew again. There is no apparent damage to the board 715T2463-4. I am trying to repair this at a component level any suggestions?


... Flat Panel Televisions

250v fuse blown on ysus board replace fuse still no picture lg 42in plasma


... LG RU-42PX11 42 in. EDTV-Ready Plasma Television

I just acquired a Westinghouse sk-26H590D tv/dvd combo and the 5amp fuse was blown. I replaced it and when I plugged it in to test, fuse blew with a flash and a little smoke. Any idea what to check next?


Hello\015\012The main power regulation section inside your TV has some short circuit. The fuse provided in every electronic equipments, are for protection from short circuit, and overvoltage. If a fusw should blow, surely there must be some s ... Westinghouse Electric SK-26H590D 26 in. HDTV LCD TV/DVD Combo

Open circuit 125v 4 amp fuse on DM board mitsubishi 55711. ran solder across top to complete circuit and popped 3 capacitors on board that i just replaced. the old ones did not look blown but thats what all the stuff on intenet said to do was the 7 capacitors first. still flashing green light


... Flat Panel Televisions

Note that I now live in the Philippines and I need two parts ASAP for my Toshiba 40E200U1 40"inch LCD. (parts and service is very difficult here!) The part numbers are: 1. A6069H (SK031) IC 2. 120 K Resistor Note that I have a friend here who can install these two components so as to avoid replacing the entire power suppy circuit board. Please advise if you can assist. If necessary, please provide a quote for the entire circuit board if the two parts a


... Toshiba Flat Panel Televisions

It started with the convergence going haywire, not fixed by restoring factory default or advanced adjusting of convergence. I turned the set off and unplugged it. The next morning it would not come on - only the green light flashing. Coincidentally (???) the cable box also would not even power on - had to be replaced. I researched and found the problem with the green light (DM board kit available with 7 capacitors and 2 fuses plus instructions). But, am I going to have to replace the convergenc


Projection TV sets have two very common problems. One is convergence ( 3D/Warped video) the other is CRT fluid ( Dull Video). Here are more details and solutions for both. Repair kits with instructions are also avail from ... Mitsubishi WS-55511 55" Rear Projection Television

Power will not tour on Samsung T220HD model. I replaced a bulging capacitor on the power supply board and still will not turn on. I also tested the fuse with an ohmmeter and the fuse was good. any ideas what to try next?


... Samsung T220HD 22 in. LCD TV

Coby 40 LCD flatscreen. Went dead after 2 months. Power supply circuit board fuse [6.3a/250v] is blown. Tried a jumper with a 7 amp and it blew right away. Direct short someplace in the components of the power supply board. Do not have much experience past this point. Any ideas besides using it for spare parts?


Your TV's manufacturer support page(s):http://www.cobyusa.com/?p=supportSolution #1 - exercise the manufacturer's warranty - ... Coby TFDVD1550 15 in. TV/DVD Combo

I have a Samsung LE37R4 LCD TV. The two 150mF capacitors and the 3Amps fuse, on the BN41-00521B power supply board, really exploded a few minutes after powering the tv. I have replaced them but the new components too exploded after 1-2 minutes. Maybe other components are to be checked?


... Flat Panel Televisions

Toshiba TV Model 32C11OU. No power. Outlet is good. Replaced Fuse on Power Supply Board but to no avail. What next?


... Toshiba 32C110U 32 in. LCD TV

Polaroid FLM-2634B model number 2700 had a ppwer problem. It blew fuses. I replaced the main power board and it was working fine, until it was on for about 20 minutes than the video goes blank, but the sound is still on as well as the power indecator (still blue). Is there any othe thing I can do to fix this?


... Polaroid Flat Panel Televisions

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0852 seconds