Having problems with your Flat Panel Televisions ?

Samsung LNT4661FX/XAA. The screen appears over bright and the picture is washed out. Adjusting Brightness/Contrast/Backlight has no real effect. The T-CON and main power supply boards have been changed. Next on the list are the inverter boards - are these the most likely point of failure?

Answers :

Repair Help & Product Troubleshooting for Flat Panel Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

Samsung LNT4661FX/XAA. The screen appears over bright and the picture is washed out. Adjusting Brightness/Contrast/Backlight has no real effect. The T-CON and main power supply boards have been changed. Next on the list are the inverter boards - are these the most likely point of failure?

... Samsung Flat Panel Televisions

I have a panasonic th-42pe7u, I just replaced the power supply board with a brand new one and now i get a red light that blinks 10 times consistantly, prior to the board change I was getting only a solid red light? what to check next? there are no obvious bulged caps or burnt diodes

... Panasonic (TH-50PZ700U) Television

Sv 2010 lcd dead. Comes with external power supply 12volt DC. Do i have to change the main board or is there a reset point (remove Aamic chip?).12 volt seems OK from supply.

... Flat Panel Televisions

Have Protron PLTV-3250 TV and I was told the power supply board was bad. All indications concluded this was the problem. Replaced the power supply board (FSP194-3F01 power supply) and turned the TV on. It has power, but I have no picture. I can hear the sound from each channel, but that is it. I can change the different sources using the remote control and when I come back to TV, the picture (white fuzz or blue screen) will flash for a moment, then it goes black. If I select a source that

... Spectroniq PLTV3250 32 in. LCD TV

My olevia 242-s11 want turn on changed power supply and main board whats next

Two things, assuming you installed a working power supply and main board, check to make sure the kill switch is in the "On" position. If my memory serves me correctly, this set does have one. Are you sure you have a working outlet? power cord? When y ... Syntax-Brillian Olevia 242TFHD 42 in. LCD TV

Television Tv stuck in standby front led blinking only.Once the front led is blinking will not stop blinking by switching off with remote or side contol on tv. The only way is by removal of mains plug. Power supply used is Vestel 17ips10-3. Will change power board if this fault is caused by faulty board. Can anybody in the know confirm that the fault as explained is likely to be caused by a fault in power supply board.

... Flat Panel Televisions

Power supply board test point voltages for Panasonic th-42pz77u

... Flat Panel Televisions


... Flat Panel Televisions

M228WDP-BZ - Pure white screen. Power supply board checked. Voltages through connector to main circuit board OK. Changed main circuit board without any improvement. Need to know the voltges that should be found at the connectors from the power supply board to the screen?

... LG 42LC7D-UB Television

Coby 40 LCD flatscreen. Went dead after 2 months. Power supply circuit board fuse [6.3a/250v] is blown. Tried a jumper with a 7 amp and it blew right away. Direct short someplace in the components of the power supply board. Do not have much experience past this point. Any ideas besides using it for spare parts?

Your TV's manufacturer support page(s):http://www.cobyusa.com/?p=supportSolution #1 - exercise the manufacturer's warranty - ... Coby TFDVD1550 15 in. TV/DVD Combo

No power I have a LG 50PG20 Plasma. It does not have any power. I changed 5 capacitors that were bulging on the power supply board 10v and 50v. I tried to power it on with no results. I looked at all the capacitors on the other boards and they seem to be fine. Is there anything else I can look for that can solve this issue. Thanks

When the caps got real bad they may have taken another part on the power board---also see if any of the foil traces on the bottom of the board were damaged by the caps---some will actually leak a material that can eat the board foil off.Short ... LG Flat Panel Televisions

I have an Akai PDP5016H television recently it will not power on , I have to push power button several times before it comes on , no picture and no sound , Occasional lly it will stay on with the AKAI logo blue screen and then the screen will change to gray or scramble gray. On the upper right corner it it will say" AIR 8" and at the bottom right corner it will say " fill screen" I looked at the power supply for any bad caps but did not see any visibly. I even check the power supply board f

There's a good chance you have failing electrolytic capacitors either in the power section or the inverter section or both.Any caps in these sections that look bulged at the top, or bulged/leaking at the bottom need to be replaced, and in your ... Samsung Flat Panel Televisions

Sansui SV-3715LCD, I switch off the unit at the wall socket, when I plugged it in the next day there was no power, not even the LED indicator light on the front of the LCD activates. I checked the plug power and it has AC supply voltage right up onto the internal Switch-mode power supply board. Any suggestions

Continue to check--every set has a standby power supply that powers the remote circuit to turn set on and it runs 7/24 if set is plugged in.Never a good idea to turn set of by taking the AC away--it can cause micro problems(micro processor). ... Flat Panel Televisions

I have a Hitachi plasma model# 55hdt79 that went black out. No display at all. Sound is ok. We checked the power supply unit and found out that 90v output is missing. We changed the power supply unit assuming that this is the cause, but still the 90v is missing. All the LED lights on in sequence and switch off after loading when I switch on the main power switch. This means no error. The TV can be switch on and off by the remote. Which board is probably the cause of this issue?

It sounds like the transformer on board has gone out (not the one in the power supply) and is no longer charging the panel. the board internally that holds the transformer will have a model number on it, any decent repair facility should allow you to ... Hitachi 55HDS69 55 in. Plasma Television

I have a sony kdl-52v4100 tv. It had a power surge and now blinks 2 times. I changed the power supply with a known working one and it burnt it up. I changed the power supply again and the bu main boar

... Sony Bravia V-Series KDL-52V4100 LCD TV

The vizio light comes on as if the tv was turned on / the vizio light does not go dim to bright when the power switchis applied / tried changing power supply board / no change

Frankly having it posted as a Sony does not help. Aside from changing a board you did not need to change what other simple steps have you taken? Vizio model number? Some of the simple things (if you can see Vizio logo and it stays set is o ... Sony BRAVIA KDL-40S2010 40 in. LCD Television

I need detailed schematics with wire codes and values for diagnosing problems I am having with a Westinghouse SK-26h520s. The original problem was a dead machine, no indicator light so no power, replaced power supply now have indicator light but no sound or backlight, figured bad main board. Replaced board, made no difference. Any information, help or schematics with points and corresponding values to test with a volt ohm meter would be greatly appreciated

... Westinghouse SK-26H520S 26 in. LCD HDTV

I have a Sony Bravia KDL 46W5150 that I just replaced the main board on because of the tv powering itself off and continually trying to come back on by itself. My next set is the power supply board has anyone else had this issue?

... Flat Panel Televisions

Phillips plasma model 50PFP5332D/37 screen is locked in at grey/white with a colored pattern running horizontally across the screen. note that the lighter area on the left may be due to a ribbon cable connector as it was not there in the begginning.. no display from menus and no changes in appearance from any button presses. caps replaced on the x-sus board incoming and the power supply board on the y-sus outgoing section but no change

... Flat Panel Televisions

I have a vizio vp422 that made a loud pop and now doesn't have any picture or sound. When you power it on the vizio display light turns from amber to white but that's it. U have to unplug it to turn it off. I have checked the fuses and they are good. The capacitors look good visually. There are a couple on the power supply board that have a black cover over the top, so I don't know about those. I changed the main board and made no difference. Someone please help!

Replace its power supply regulator board as card basis. ... Vizio Standard (CRT) Televisions

I have a ViewSonic N3251w and the set will not power on. I have reset the button in the back and used a new cord. What next should I attempt and were to I get the power supply for the TV if you think that is the problem. Next question is can you give me step by step how to change it out. Thanks

Hello\015\012\015\012When replacing power supply section of LCD TVs must be done very carefully. First of all, LCD screens are more sensitve to static voltages and can damged easly. Damage usually occurs to the scree will be visible aft ... ViewSonic N3251w 32 in. LCD HDTV

Have a zenith plasma. need to change power supply board eax61415301/6...wondering if theres a compatible board such as eax61415301/10?

... Flat Panel Televisions

Have a panasonic tv model TC-42PX14 and need to know what to do before changing power supply board.

... Panasonic Tc42px14 42 in. TV

Toshiba TV Model 32C11OU. No power. Outlet is good. Replaced Fuse on Power Supply Board but to no avail. What next?

... Toshiba 32C110U 32 in. LCD TV

I have a philips 42pf7320a/37b that has 7 blink code error. When I unplug the wire that link the power supply with Y sustain board and When I unplug the white wire that link the y sustain board with the logic board the tv turns on and off like a working tv. But no picture and sound.I want to know which board I should change to solve the problem.

... Philips 42PF7320A 42 in. Plasma HDTV

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1515 seconds