Having problems with your Flat Panel Televisions ?

TV WONT SWITCH ON LE26A456C2D standby light blinks 5 times, 1 long, 4 short then goes out and tv wont come out of standby. You then have to remove the power. PSU capacitors do not show obvious signs of failure. Are these obvious signs of PSU failure or could it be the main board

Answers :

Please read my giude then you may understand more as to what it takes to make the TV functions.
\015\012Basic LCD monitor and TV troubleshooting guide:
\015\012Failed TV and Monitors: http://s807.photobucket.com/albums/yy352/budm
\015\012Learn about bad caps: http://en.wikipedia.org/wiki/Capacitor_plague
\015\012Parts: www.shopjimmy.com
\015\012Capacitors kit: http://lcdalternatives.auctivacommerce.com/Default.aspx he can make you a set of caps.
\015\012Or www.digikey.com, just make sure to use caps with low ESR, 105c, high ripple current and long life rating such as PANASONIC FM or FC series.
\015\012Please post back what you find.
\015\012Please leave rating if it helps.
The code will tell the engineer where to look.\015\012
\015\012I dont know what this code means but could be display driver, main board etc.\015\012
\015\012If you ring samsung service centre in your area and tell them a code they should be able to give you an idea and a very rough idea on cost.\015\012




Please dont forget to vote this answer was helpful

Many thanks


Repair Help & Product Troubleshooting for Flat Panel Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

TV WONT SWITCH ON LE26A456C2D standby light blinks 5 times, 1 long, 4 short then goes out and tv wont come out of standby. You then have to remove the power. PSU capacitors do not show obvious signs of failure. Are these obvious signs of PSU failure or could it be the main board

Please read my giude then you may understand more as to what it takes to make the TV functions.\015\012Basic LCD monitor and TV troubleshooting guide:\015\012 ... Samsung Flat Panel Televisions

I have a LT37HVS Olevia flat-screen that has a similar problem to one of the posts. I had the same blue standby type light on the front that stays lit, but turning it on just makes this light blink, and no display. I did as the posts here sugested, peeled it apart and manually inspected all of the capacitors. To my dismay I haven't seen one yet that looks bloated or leaky. I have inspected the main power supply board, both display boards and the main board. There were a few capacitors that

If turning it on makes the light blink then its a clear case of open circuit.. Honestly there are lots of components like diodes, fuses, transistors etc., and either of them if shorted create an open circuit. I do not think this is a capacitor proble ... Olevia LT37HVS 37 in. LCD HDTV

Tevion lcd tv. wont come out of standby. replaced 5 capacitors, capacitors were bulging, t.v . bought in aldi,living in ireland.

Since you did not give a model number I can not locate a service manual. You can try;\015\012\015\012http://www.eserviceinfo.com/ ... Flat Panel Televisions

I Have A .AWA MHDV2411-03 When I Turn On The Mains Power Switch On The Tv - To On . The Red Stanby Led Lights Up As Normal Then I'll Press The Power Button On The Remote The Standby Led Lights Changes From Red To Green As Normal And The Tv Works Fine.When I Switch The Tv Off From The Remote Or The Mains Switch The Tv Switches Off As Normal. Now When I Go To Turn It Back On Again The Green Led Is On All The Time And The Tv Wont Work . When I Leave The Tv Switched Off And Disconected For Sev

... Standard (CRT) Televisions

Bush lcd40883f1080p keeps going into standby mode. I switched it on then the light flashes once then switches back to standby mode. I've unplugged it and removed all connections, also eye checked PSU with no visable signs of damage. Help

... Flat Panel Televisions

Hello, have a sharp lcd tv model lc22d12e no picture no sound no standby light just low level high pitched noise from psu vestel psu 17ips17-2 main board mb60-2 any ideas

... Sharp Aquos Flat Panel Televisions

Hi, my samsung LE40A557P2F tv is stuck in standby. the red standby light is on and then flickers wen any button on the remote is pressed, just wont come on. ive disconnected from mains overnight but then still same problem!!! am i missing something or is this a common fault... help plz...

... Samsung LE40R72BDX 40 in. HD-Ready LCD Television

I have a Sharp LC-22L 10M TV, it has gone off with the standby light flashing red and wont respond to any controls. If I power off at the mains supply and back on again it comes on for a second and then back to the flashing red standby light. Can anyone help?

Flashing standby light indicates internal circuit problems. Visit the site named 'Electro-help' for\012more details. Click this link. View it in \ ... Flat Panel Televisions

I am trying to fix a Hyundai TV, model HY-14N10. before it breakdown, its power LED indicator shows sign of intermittent flickering until it wont turn on anymore. i need a circuit diagram to check for normal voltages at the pins of (Toshiba ic) 8873CSCNG6UP3 during standby mode. i would appreciate it very much if you could provide me its complete circuit diagram and the pin data of the above ic and also your advice if you have the probable solution to the problem.

... Flat Panel Televisions

Pdp-428xg the standby red led comes on... but cannot start by pushing the power switch on both the tv & the remote.. Just no respond. The LED on the Power supply PCB is on.. I can hear the relay click when I plug in the power cable... Is it a Power supply failure??? the PSU number is 1H403W. Many thanks

... Flat Panel Televisions

Technika lcd40-920 My tv has switched its self off and wont switch back on again although the standby button is still on (was flashing but now on with no flashing) ive tryed turing it on with the remote and using the touch buttons on the side and turning the mains off for 10mins to see if it resets or something but still nothing. Please help. I really dont want to have to buy ANOTHER TV! GRR! Ive done my research and what ive seen is people saying its the board with the hdmi etc and theres no po

Thissounds like a very common issue.If set is hard to turn on (takes several tries)but will eventually turn on hereis what my guess would be.Every set has a standby p ... Flat Panel Televisions

Sony Bravia KDL-40S3000...standby red light blinks at intervals of 6.. Main power supply board has no burnt capacitors nor does the auxiliary power board. What could it be?

There may be no horizontal ouput, Check C515 & 516 and the jungle IC, IC206.Hope that helps ... Sony KDL-40S3000 40 in. LCD HDTV

Hi I have bought a Atec( av370d) lcd tv and its stuck in standby...I have changed the psu and its still the same as thought it could be a power problem... I have got the remote but im thinking that someone has coded it....now is there a default like 1234 or 0000 and how do i enter this using the remote...ie: is the a sequence a set order to pust the button and which one ( obviously the numbers but what others) Regards Frank

... Flat Panel Televisions

Sharp LC-46D64U Stuck on Standby

... Sharp LC-46D64U 46 in. LCD HDTV

Wont come out of standby its a sanyo ce32ld47 -b i had my xbox in it and my xbox is now broke with red ring but 2day my tv wont come out of standby and the xbox is not pluged in i press the power light the standby light goes off like its going to turn on but then goes back into standby

... Sanyo Standard (CRT) Televisions

Our JVC LT-32DA42J wont come out of standby!

... Flat Panel Televisions

Vpw 425 viewsonic, have owned this Plasma, for several years, has always operated fine. Today it won't turn on. Main power switch is on. Standby switch is red. When I push the standby power button, it changes from red to green, I hear a click, then within 2-3 seconds the standby light turns back to red. I removed the back panel and tried to start again, after several tries there is a red indicator light (inside the panel) labeled "main power" that comes on and stays on.

... ViewSonic VPW425 42 in. Plasma HDTV

I have a cornea 47" tv that wont' switch on only the standby light remains on

... Sony Flat Panel Televisions

I have akai CT 2579 model TV. After 5 or 6 minutes my TV automatically goes into standby mode. After 4 or 5 seconds, when i press power button from remote control or press main power switch from the main board, it starts working and again after 4 or 5 minutes, it goes again into standby mode.

... Flat Panel Televisions

HELP! Olevia lt37hvs screen went blank. No Sound, panel buttons wont work. Backlight is only on on half of screen.

If you had audio i wold say its most likely the Tconn or its upper two connections to the Panel itself. But since you dont have any sound either I would assume its either the LVDS cable from the main board to the Tconn or the Main board itself as aud ... Olevia LT37HVS 37 in. LCD HDTV

Viera TC-P50ST30 My TV is DOA. No power, sound, etc. No standby light. Confirmed house fuse, batteries, plus, etc. good. Tried unplugging for awhile. Makes a noise when I plug in to powerstrip or directly to wall. Someone said possible short. Pulled back cover. Checked ribbon between power supply and main board. Meter reads 5 when main not plugged into power. Drops to 2-3 when plugged to main. Is that where the short is? Isolated main by disconnecting all other connections to main. Should I ju

This may help... ... Panasonic Viera TH-50PZ85U Plasma TV

Wharfedale DMP82 mini hi-fi unit. It's stuck in standby. When the standby switch is pressed, the display lights up then goes back to standby. LCD display is on as the 5v line is still present. The 2 x 14v lines are at 4v and rise momentarily as does the 12v line. The standby line is 0v then rises to 2.5v when the switch is pressed. Not an easy unit to take apart and I've only managed to get the back (PSU) off. Any ideas?

... Flat Panel Televisions

LG55LH40 LCD TV wont come on

The set will need to be properly diagnosed. It could be a defective main board or power supply. ... Flat Panel Televisions

Main Board? Had issues for years, where I had to unplug once in order to get the tv to turn on. Then one day, it would not turn on. The TV shows a quick lightening of the screen like it is going to turn on, but nothing appears. It also clicks once or twice. Took to a repair shop and they diagnosed with main board failure and refused to fix due to lack of parts. Do you think it is the main board and where would I find one? I am pretty handy, do you think I could DIYthis job?

The fault must be due to a main board fault. Generally, it will be impossible to get this board repaired. A replacement must be done. Most of the parts in this board are not available by local electronic spare part market. After power ON, there sh ... Proscan 47LB45H 47 in. LCD TV

No picture I have replace logic main board and y main board but it remain into standby when it does not show that the is remote interference and I plunge out the logic main board from the power supply it gives sound and I can change channel.

... Samsung PS42B430 42 in. Plasma TV

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.3135 seconds