Having problems with your Standard (CRT) Televisions ?

Have a dlp samsung HLT6176S no picture already replaced the bulb still no picture what gives

\015 I have already replaced the bulb still no picture , no weird noises but all the lights are blinking in the front of the TV I am lost and need help\015

Answers :

Remove the lamp and look at the color wheel that faces it.

If wheel is shattered or missing pieces set will know it is not moving or moving too slow and shut set and lamp off.

Not all color wheels when fail make a sound


Repair Help & Product Troubleshooting for Standard (CRT) Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

Have a dlp samsung HLT6176S no picture already replaced the bulb still no picture what gives

Remove the lamp and look at the color wheel that faces it.If wheel is shattered or missing pieces set will know it is not moving or moving too slow and shut set and lamp off.Not all color wheels when fail make a sound ... Samsung DLP HL-P5663W 56" TV

My Samsung HLN617 does not have picture. I have replaced the bulb and color wheel (thanks Jango) and still no projection. What gives?

... Samsung HLN617W 61" Rear Projection HDTV

I wonder if you can give some advice. Please. I have a Samsung DLP HLT5076S that is 3 1/2 years old. I replaced the lamp in November 2010 from a bulb site on line because I had no picture and three flashing lights. After reading several forums this seemed the solution. After that seemed to work well. However, shortly thereafter I began to hear a very slight buzzing noise. So I researched that and most things pointed to color wheel. I didn't hear the high pitch whining though just a slight buzz.

There's a good chance you have failing electrolytic capacitors either in the power section or the inverter section or both - either can cause transformer buzz and / or inability to power up.Any caps in these sections (or any other section for t ... Flat Panel Televisions

I have a samsung hlp5085w with a light bulb symbol, my question is what else i have to change, i already replace the light bulb which was blown, i replace a color wheel too and still got the light bul

... Samsung HLP5085W 50" Rear Projection HDTV-Ready Television

Samsung 61 Service Model: HLP6163WX/XAA Model: HL-P6163W Samsung DLP with flickering and partial freeze frame upon start up persisting for about 10 minutes before picture (from any signal source) will resolve and then operate properly for as long as the set is left on. DLP bulb recently replaced and does not appear to be the symptoms of a bad color wheel. Could this be a light engine issue? DMD issue? light tunnel issue? ballast issue? Not sure how to trouble shoot... please help...

If using a cable or sat box try a DVD etc when set cold, a box can cause lockup issues via signal.Not a color wheel is correct, more likely a DMD which is rather pricy and almost as much as the entire light engine which comes with it. ... Samsung HLP6163W 61" Rear Projection HDTV-Ready Television

RCA HD50LPW Projection DLP TV. Replaced bulb, still no picture. Has sound and after startup, the green light on the on/off button will blink 5 times every 15 seconds or so.

... Projection Televisions

My TV turns on shows picture but shortly later cuts off. During the time while its on I can change channel, inputs but I get no sound. I took panel apart and found a blown bulb. I changed the bulb and still the same issue. First I was getting 13 blinks and after replacing 1 bad bulb it only gives me 8 blinks. Please help me solve this issue and fix my TV.

Please tell me whats the make and model of the tv so that I can tell you what the 8 blinks error code means ... Flat Panel Televisions

Samsung dlp hls4666wx TV. After a power surge, my TV shuts off after about 4 minutes. The stand by, TV, timer lights flash...manual says it's the bulb or fan. Only, I bought a new bulb, and noticed both fans are working. Still does it. It makes a small pop them hiss or buzz sound when it offers the bulb down. The power supply and ballast look ok (circuit boards). Perfect picture and sound before shutting down. I've heard there are 3 fans but only see two. Could it be another fan I don't see? Or

... Projection Televisions

I have a samsung HLR6167WX/XAA dlp tv. I replaced the bulb, it worked for 1 day and didn't turn on the next day; no lights, no noises, nothing. So then I just replaced the ballast, still nothing.

Have you reset the lamp time after lamp replacement? If you wish to get more details, check this\012site. Pull up older posts there. Check the site ... Projection Televisions

I have a samsung dlp model hls5086wx/xxa that recently stopped working. Lamp light came on so I assumed the lamp needed replaced. Replaced the lamp and still won't turn on and lamp light blinking. It also make a whining noise when turned on but I don't get a picture. Is it the color wheel or ballast? Any suggestions?

... Samsung Projection Televisions

Samsung DLP 46 Slimline: MODEL: HLT4675SX/XAA After having this tv for over 4 years with no problems the set has been having washed out colors then goes dim then turns off after just being on for 15 min. I have all ready replaced the bulb from Samsung still same issue.

... Flat Panel Televisions

My Samsung HL-R5087W Pedestal DLP has a black screen. Replaced the bulb still black. Goes through startup -- get smiley face -- here the whirr-- no pix, no sound no triangle, returns to standby.

... Samsung HL-R5087W 50" HDTV-Ready Television

Samsung hl-p 6163 just replaced bulb and still have no picture. the color wheels turns on and the screen turns on it just black. what could be the problem

... Projection Televisions

My samsung dlp's lamp light flashes with an alarm sound for 15 seconds then all three lights flash and nothing... replaced the bulb, still nothing. any ideas???

... Samsung Projection Televisions

I have a Samsung HLT5076S DLP Tv. I watched it this morning and when I came back home I tried to cut it on but no picture or sound. I hear a buzzing sound in the back and the lights in the front are blinking. I had the bulb and colorwheel replaced about 2yrs ago. Can someone please tell me what this could be..

Check weather the fan is not working which the cause of shut down. ... Samsung HL-T5076S 50 in. TV

My samsung hl-t5676s makes a humming sound every now and again and the picture is not as vibrant as it was. I already replaced the bulb roughly 10 months ago.

... Projection Televisions

No Picture I have no picture but do have sound. LEDs show bulb not operating. Replaced bulb with 2 different new bulbs and still the bulb will not come on.

Did you checked the inverter board that supplies voltage to the bulb. If the inverter is faulty, or if it do not get proper voltage from the main power supply regulator board, this fault can occur. Check these. ... Toshiba 72HM195 72" HDTV

I have jvc replaced bulb but picture is still very dark if not bulb then whay would cause the dark picture not bright or vibrant

Problem could be in the Light Engine and it may need to be replaced. which is also known as the optical Engine PN# TSCOP7A-SAA ... JVC HD-52G786 52" Rear Projection HDTV

I have a samsung HLN5065W dlptv. My wife turned it on one night and no picture. we did get sound. i noticed when I turn the tv on, it shuts down and restarts to no avail. I see a blinking lamp light and after a few restart attempts, i get the three blinking lights. I have replaced a lamp supplied by samsung parts. still no picture. same three lights blinking. do you have any ideas?

The tv also have a board that call the Ballast board could be dead too.This Ballast board only job are to ignite the tv projection lamp. ... Samsung HLN5065W 50" Rear Projection HDTV-Ready Television

I have a mitsubishi wd 65738. My picture suddenly went dim. I can still see a picture but the room has to be very dark and its still hard to see. Do I just need to replace a bulb?

Hello\015\012Its bulb has got traoubled or its control circuit has some faut with it. it is not a user serviceable item. Replacing bulb can be done by the user according to the instructions in its user manual. But trouble shooting its control ... Mitsubishi WD-65738 DLP TV

I had 3 horizontal black lines on my samsung pn50c450b1dxza. i replaced the y buffer board. there was no picture but still sound. when i put the old y buffer board in the picture works again, but still with the horizontal lines in it. is the new board i ordered defective? or is there another problem?

... Samsung PN50C450B1DXZA 50-inch Class Television 720p Plasma HDTV

I have a Samsung DLP TV (model HLT5076S). When you turn it on there is no picture for several minutes (5-10 minutes) and then there is no sound once the picture comes on. You need to turn the TV back off & then restart it to get both picture and sound. Sometimes you need to do this several times before the TV turns on, you hear a click, and then you get picture & sound. It seems like it is waiting for something to warm up? The problem is not the bulb (fairly new) or with the electrical outl

This is because the CRT that is the cathode tube ray oscillator is taking time to warm up ... Samsung HL-T5076S 50 in. TV

Samsung model un40eh6000fxza has had all parts replaced including the front panel and we still cannot turn the tv on. There is a 6-8 second lag before the tv reacts but no picture or sound

... Samsung UN40EH6000 - 40" Class 40" viewable 6000 - UN40EH6000FXZA

Samsung HLS6187 wx/xaa replaced bulb and ballast, clicking noise still

... Samsung Standard (CRT) Televisions

73" Mitsubishi DLP. turned on the tv and got only sound, no picture. after a minute it would shut down and red light would pop on the front. replaced bulb and hooked it back up. now it turns on but af

Try cleaning the little fans that keep the bulb cool, the temp sensor will shut it off so not to damage the bulb , the winning sound may be the fan going bad or not working like it should. ... Standard (CRT) Televisions

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.2031 seconds