I assumes that there is a confused memory IC inside, due to improper data inputs. Try a hard reset to this set. Unplug it from AC mains wall socket, and re-plug it back after 10 minutes of so. This must make it a hard reset. If it do not help you, contact any service technician. If you are somewhat sound in electronics and If you wish to get more details, surf this link.\012http://electronicshelponline.blogspot.com/
\012There are more than two thousand and four hundred posts. All are related\012to television and other domestic electronic equipment service help.
Suggested Questions/Answers :
It is recommended you read all this kind of situations
Picture I was litening to music threw direct box,vacumming,different outlet then tv. turned it off,& used converter box buttons to change channel. got no pic no sound. pushed more buttons,turned it off, then on hit reset, pulled card out put it back,then turned around to get remote, and saw my 82 yr. old dad holding remote as far out as he could,as if he was trying to get around me! I asked him what button he pushed & he said none. now we have sound no pic. it turns on deep blue screen no menu
I assumes that there is a confused memory IC inside, due to improper data inputs. Try a hard reset to this set. Unplug it from AC mains wall socket, and re-plug it back after 10 minutes of so. This must make it a hard reset. If it do not help you ...
Samsung 50 in. Plasma TV
When set is turned on, there is sound, but the screen is black. I can push the LCD On/Off button on the remote control to get the picture on for about one second.
You have a short in the panel and the panel needs replaced. ...
Niko Flat Panel Televisions
I have a SONY KF-WE50 rear projection tv, a few weeks ago it started to turn the pic and sound off while the green light was flashing around 30 times. After the light finished flashing both the picture and sound came back. It repeated this 1-3 times just after turning the tv on. We continued to use it as is and now the both pic and sound turns compleately off and a red light is flashing at the front. Non will come back again. If I plug it out (as this is the only option to turn it off) and leave
The green is the reboot process and is normal.the red light is an error code indicator.count the blinks of the red light...it cant be 30 times (I think)it will blink a sequence, pause, then do it again for a total of three times. ...
Sony Projection Televisions
Hi, I have a Sanyo tv. Turned it on this morning and have no sound! I have sky and a PS3 but cannot get sound from iether! I can get sound from the PS3 using my headphones! I've tried as many different things as I can find online to fix the problem but cannot get the sound back...
I've turned everything on then unplugged the sky box for 5 minutes and plugged it back in-nothing
I've tried resetting all audio options-nothing
I cannot rest the tv as a unit as I am using an universal remote . Can a
Have you checked its speakers? If not, check them. If they are found OK, then there should be some fault to its audio output circuit. Check and replace damaged component/s, or, change it a card bassis. ...
Flat Panel Televisions
I have a LG 42LC5CAUS, when I turn on my set there is no sound, sometimes if I turn the set off and back on I will get sound. It has gotten worse and now I have to reboot to get the sound on and the remote may or may not control it. HELP
Hello,\012\012\012You need to check the output voltages of the power supply to see which one goes off. It may be due to short circuits some where, if otherwise, Your power supply board is dead, u know basic electronics' and soldering? Most of t ...
LG Flat Panel Televisions
My tv and satellite box got struck by lighting and now the tv will only come on by the remote and the sound turns all the way down and I have to press the bottons on the side from bottom to top to get it to change back to tv mode then can turn it back to hdmi component then will let me turn the sound back up
The fact that the TV comes on tells me that more than likely the surge came on through the video cable. Without looking at the TV sounds like a main board issue. I recommend having a qualified technician check it out. ...
Sony Flat Panel Televisions
Panasonic Viera TC-L32C12 LCD TV The tv screen is dark. Sometimes a channel flashes on and off, sometimes with sound, usually with no sound. The remote will turn the tv on and off, but do nothing else. I wanted to rescan the channels, hoping that was the problem, but I can't get the remote to work with the tv. I tried new batteries in the remote and reconnected the antenna.
Panasonic Viera TC-L32C12 32 in. LCD TV
Hello - i have an LG Rear projection television model: RT-56NZ23RB we purchased the tv around 2004.. The red light on the tv comes on but there is absolutley no picture or sound coming from the tv (wont come on !). Usually when the red light on the tv is on - we use the remote to turn it on - so the light turns green but this is not happening at all , cahnged batteries in remote etc... what could be the problem and how much would it cost to fix ???
Replace the Power supply/Deflection Board .\015\012Zenith Exchange Moduels 1-800-844-7871\015\012I use this company ,to change out zenith boards . Its cheaper in the Long run.\015\012The board I am talking about is the one with the ...
LG Projection Televisions
Panasonic projection tv model tx 43p950x, there is power loss while I turn on the remote and there is no power when I pushed the button on front of the TV. Before it happen I connect an audio cable on the back right above mark monitor, and the other end to my amplifier audio. Then I hooked up a magic sing in front on the TV. I turn the TV and the Amplifier, both is on, then I turn on the magic sing and it works and I could hear the sound in my Amplifier speaker and so in the TV. Now I turn both
Panasonic Flat Panel Televisions
I programmed my sudden link remote to my tv and turns my tv on an off, controls the volume, but when I try to change the channel of my television with the remote, the red cable light on the remote lights up as if it thinks I'm trying to tell it to change the channel on the sudden link channels and not the channels of my tv....help?
(I know this sounds lazy because normally people would just say get up and change the channel but our tv buttons don't work and I don't have the original remote)
Flat Panel Televisions
My remote quit working on my 19" venturer/DVD tv.; bought a universal remote but it only turns tv on and adjust the sound.
Can I get a replacement remote
Venturer Electronics offers replacement parts at the following site: http://www.1800customersupport.com or call 1-800-252-6123 ...
Venturer Flat Panel Televisions
I recent purchased a 23" full HD LED TV from The Source. I have it hooked up to a Shaw PVR and have programmed the Shaw remote to access more channels and be able to program taping. When I first turned on the TV and was about to do the initail setup, it went from the Welcome screen to Channel Scan and despite my best effort I cannot get it to scan the channels. I tried pressing OK and then pushed the channel button but nothing happen. I then pushed Menu, scrolled down to TV and then channel
Hi there,\015\012\015\012There is always a possibility of getting a lemon when you buy any new electronic device, but I hope this is not the case here. From what you describe, it would appear that the channel scan is not finding anything ...
Flat Panel Televisions
The speakers are not working. if i turn up the volume, I can hear static noise, but do not get any sound. tv speakers are on. I played around with the audio settinds and all the different hdmi ports, still no sound. do you think the speakers are bad.
Hello\015\012There are two possibilites for this fault. The first one is, damaged speaker voice coil and the second one is damaged audio output IC. To confirm it you have to open your TV. Speakers can be checked without removing them from th ...
Vizio M550NV 55 in LCD HDTV
I have the RCA F27351WN and cannot turn to the input channel. I have tried channels 91-99 and I am unable to get to channel 00. How can I change to the input. I just bought a universal RCA remote and programmed it to the TV but it still will not change the channel and when I push input on the remote it changes to channel 3. How can I fix this?
Try by pressing "0, 0" by remote control. If it do not changes, there is no other way with select it by universal remote control. ...
RCA F27450 27" TV
When I turn on my 42" vizio all I get is the vizio screen no sound and the remote will not work to turn it off.after being unplugged for awhile (days) i tried it again and it worked fine until i shut
You will need to get a diagnosis done on the set. It could be a power supply issue or a main board issue. Your problem is between one of those two boards. ...
Vizio VW42LF 42 in. LCD HDTV
The tv does not turn on- either by the remote or by pushing the button on the side of the tv- it took over an hour today to get it to turn on
There is probably a fault with the power supply. Get it repaired by a TV repair shop. ...
iLO Flat Panel Televisions
Have a phillips model #42HFL5860D/27 at the hotel where I work, and recently it began a routine of turning off about once every hour or so. It always comes back on normal with a push of the power button on the remote. I made sure the sleep timer was off, and I think this began after somebody was goofing around with the remote. Any ideas? tks. Not so sunny in Fla.
Philips 32PFL3505D 32 in LCD TV
TV remote on my model TXL2791F won't turn TV on. When I press the power button on the TV itself the little timer light blinks and the TV makes a ticking sound for a few seconds. If I press the power button again the blinking light and ticking sound happen again for a few seconds. If I repeat pushing the power button on the TV again the blinking and ticking will then go on all day long unless I unplug the TV for 15 minutes or more. All during this time the screen is dark. Just before this ha
Samsung TXL2791F 27" TV
Our RCA 27 inch TV (F27227EM), purchased on 1992, is hooked up to our DirecTV DVR Plus box. A simple click of the "ON" button on the DirecTV remote has always turned on both the DirecTV box and the television simultaneously. Yesterday, the TV stopped coming on even though the DirecTV box still powers up. No sound or picture on the TV. If I get my ear close to the TV I can hear a very faint click as though it is trying to turn on, followed a few seconds later by the same faint click as if it'
RCA F27442 27" TV
i have a westinghouse Ltv 32w6 hd when i turn it on i get a blue light no sound and no picture. cantturn it off with on/off button or remote. have to unplug it to turn off blue light.
It can be the main board is bad and not sending the signal to turn on the rest of the power supplies, or the power supply is bad and not supplying the correct voltages to the main board, so you need to inspect the two boards.\012Boards for your ...
Westinghouse LTV32W6HD 32 in. LCD Television
I have a Sony Bravia KDL-40S4100. I turn it on and I can hear the solenoid click, the green light is on and I get a faint blue illumination. I do not get a picture or sound... or any response from the remote except for on/off. I tried unplugging it until I heard a click (I assume all the caps were discharged at this time) and tried again, still nothing but a green light and faint illumination. Any idea what I am dealing with... besides frustration?
YOU HAVE A BAD INVERTER YOU NEED TO CHECK TO SEE IF THERE IS 30 VOLTS ACROSS THE INVERTER ALSO CHECK TO SEE THAT ALL THE FUSE ARE NOT BLOWN ANOTHER ISSUE WITH THESE TV IS THE LCD ITSELF BUT 9 OUT OF 10 ITS THE INVERTER OR THE POWER SUPPLY PLEASE ...
Sony BRAVIA KDL52XBR2 Television
When I turn on tv with direct tv, I have no pic or sound. Have to shut down and start tv again to get picture and sound.
Apex Digital LD4088 LCD TV
I have a 47 lg lcd tv bought in 09. When i use hdmi for xbox 360 i get picture and sound but with ps3 no pic no sound. I just bought a sony bluray and get pic but no sound. I bought a lg bluray and get no pic no sound. I have tried 2 or 3 different types of hdmi cables but nothing so far has given me sound and picture...help please.
LG 47LF11 LCD TV
Hello, i have the sony flat panel display, model fwd-50px2, and as somebody says, when i plug it, red power light come on, i push it to turn on and the green light come on, makes a click and sounds like doing something but no image on the screen, it stays black, i think could be a board, because the fans don't work either, so, i writting you to ask which board i need to get, or what do you think the problem is, i really appreciate your help. Thankyou so much.
Sony FWD50PX2/S 50 in. Plasma Television
Upon my return from being out of town yesterday, when I turned on the Phillips 50PF9830A flat screen TV (circa 2005, but has worked perfectly all this time), the settings MENU popped onto the screen, and will not go away. The TV is connected to a Comcast cable box and BOSE surround sound system. The only way to move through the MENU screen (with all the settings options) is to use the original Phillips remote. But, there is NO way to get the menu to disappear from the screen. If you navigate
Philips 50PF9830A 50 in. Plasma HDTV