Having problems with your Projection Televisions ?

Screen came out of 55'' RCA Projection TV and dont know how to put it back in...


\015 I have a 55'' RCA projection TV(on the front of the tv it says "Home Theatre PREMIERE") that I just got from someone. During the ride home, the screen came off. How do I put the screen back in? I tried putting it in through the front but bending it just the right way to put it in is very difficult. Is there another way to put in the screen?\015

Answers :

Most go in from the rear--careful as very easy to destroy them--if front frame that holds the screens can be removed you remove it and install from rear---screens have a front and back side.......

Repair Help & Product Troubleshooting for Projection Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

Screen came out of 55'' RCA Projection TV and dont know how to put it back in...


Most go in from the rear--careful as very easy to destroy them--if front frame that holds the screens can be removed you remove it and install from rear---screens have a front and back side....... ... RCA Projection Televisions

How can i put input 1 back on flat screen tv. Because im trying to watch movies off my phone onto the tv. I dont know how to work it. Thank you..


See the diagram attached. God bless you ... Flat Panel Televisions

Hi I just bout a LG plasma modle 50pt250,ta and im trying to hook up my surround sound to it, but I dont know where to put the RCA cables on the back of the tv?


You can't do that, this tv doesn't have RCA audio outputs. You will have to connect it using the Optical output - an optical cable is required. ... LG Flat Panel Televisions

My mother hit a botton and doesnt know what see hit but she last picture and volume. she unpluged tv and pluged it back in the picture came back but no volume. she said a black and gray screen had come up just before this happend it said that volume may be interupted, she ment to cancel out of the screen but instead went through the screen instead


She may have hit the SAP or MUTE button on the remote. ... Flat Panel Televisions

Picture preset mode on rca projection comes on screen and won,t go off no matter what buttons i push.after about 20 min. it will go off and the come right back on screen and it starts flashing all kin


... RCA M50WH72S TV Lamp with Housing

I have a lg 32lc5dc that powered off by itself and now when i unplug it or turn it on with the remote the remote no longer works and i have a snowy screen. It will not power off when i plug it back in it just comes right back on, every once in a while it will stay powered off when i plug it back in and the remote will turn it on but then the remote will not do anything else. i have changed the batteries and used the reset button on the back of the tv i dont know what else to do


Hello,It's the problem of overheating in the power supply board of the TV.on the power supply board of the TV there are few capacitors and IC.any of this ic is got short or may be weak.so due to this when you start the TV the current passes fro ... LG 32LC5DC 32 in. LCD HDTV

I just put a new lamp in my projection tv.....it is a kdf-42e2000....now there is a pink line on the top of the screen and a blue line on the bottom of the screen......the lamp i installed was a XL2000 which was recomended for my tv. i wanted to know how to ge rid of the colored lines...thank you


HI , I Advise to fixed that Lamp again ( sometime you fixed but one of any wire miss connectivity ).Or Remove and fixed again all related Jack's you removed lat time.If everything's OK , then Change lamp. try other one. ... Sony Grand WEGA KDF-42WE655 42" Rear Projection HDTV

Hi, I have a 60VS810 60inch LCD projection and the blue power light flashes but no picture comes on...i just got it for free so i dont know how it worked before..yesterday i did get a blury pic on the screen that kept moving so i couldnt read the menu bar but u can slightly see the menu options..only the blue power light flashes nothing else..what could this be..the lamp looks good and the bulb is fine..what else is there so i dont have to pay hundreds to fix it


Flashes of blue light are fault indications. From the number of flashes occurs at one time switch on, you can get an idea about the faulty section circuit board inside. If you wish to get details about these blinks, ... Hitachi 60VS810 60" Rear Projection HDTV-Ready Television

My mitsubishi ws-65513 picture makes a pop noise then goes out with the sound but can still see video source info on corner of screen. then i have to turn tv off wait a couple of seconds then back on then tv will work for a shourt time before picture goes out again. i have looked at the four caps on the Dm board they dont look faulty or bulging but dont know if that is the problem


... Mitsubishi WS-65513 65" Rear Projection HDTV

My RCA flat screen was working just fine and than as I was watching TV the screen flickered off and the it started flashing unusable signal. I did a rescan of the channels a couple come back that I have never had before. The sound doesnt work on the few channels that I do get and the picture and sound doesnt work on the ones I use to get. I also tried to put a dvd in. The sound works but not the picture doesnt. What do I do


... RCA Flat Panel Televisions

I have a TP50H60 projection t.v. My dog stepped on the remote. I did not know how to get the picture back so I unplugged the cord. The picture came back on but it is blurry and shows ghost images in two or three different colors. How can I correct this?


... Toshiba 50HX81 50" Rear Projection Television

We cleaned the lenes and put new bulb in ,put the tv back together and the picture to colors like voilet color and a bright yellow took it apart 3 times..dont know what else is wrong


If your TV looks 3D, warped, or distorted it likely has a convergenge problem. If however it just looks dull, washed out, redish, greenish, or blueish or if it looks like objects on the screen have halos the fluid in the lens has soured.Y ... Philips 55PL9524 55" Rear Projection HDTV-Ready Television

RCA R52WM24 was watching tv the screen went very dim almost black then back on then off, this time lost picture sound and tv turned off. tried turning back on, power light came on for few seconds or


The deflection board has failed. You would require the ITC222A deflection board which is the second board listed on the following page which has a warranty and comes with installation instructions ... RCA R52WM24 52" HDTV Projection Television

While Im watching my tv 65 Inch Hitachi projection TV at night with the light off you can see big red, blue, an green glare projecting off the tv too the wall??? Is this because I dont have the ultra shied on the front screen???? Or anit-glare screeen, whatever they call it. but I know the part # KR02076?????


Missing one of the two inner screens which are only sold in pairs. ... Hitachi 65F59A Television

I have an RCA rear projection TV MOD: D52W19B SER: E315C30GD Chassis: ITC222. The flyback arcs when power is applied, several days ago the TV was operational, a loud pop emitted from TV, I unplugged it and let cool then plugged it back, power light came on then an arc from back of unit then turned itself on and off with the same arcing. I took unit apart after viewing your website. Originally I thought one of the bulbs blew, but after viewing the arc from the flyback I’m wondering if that’s the


Yes it is a flyback transfomer is a very sensitive piece of equipment also known as a lot or lopt in you case i would say that the case has cracked on your flyback you may get by however if the damage inside is not significant yet be wrapping the fl ... RCA D52W20 52" Rear Projection HDTV-Ready Television

I have a 32 inch RCA LCD TV. when I play a movie, every 2=3 minutes to goes back to the blue screen, and blinks a few times then goes back to the movie. Its with every movie and I dont think it is my dvd player because I had my dvd player hooked to another tv and all my movies played fine. Help!


Probably the Controller unit for the TV. Try hooking it up through a different connection type e.g. HDMI, component. See if that fixes the issue for the time being. If it dies then those ports you used previously are malfunctioning. ... Flat Panel Televisions

Blocked air flow error message on screen. I cleaned everything inside tv. fans, screens ducts, general inyerior. Put lamp module back in place. left extra fans assiting airflow into tv. TV came on for about 15 minutes. just long enough for me to feel smug. then same error. the next thig on the list is a faulty themistor. I have looked for it and have not found it. i need to find it to check connections and if needeed replace it.


Without a moodel number we can't give you much help. There is probably a thermistor that is a two lead device bolted or clamped to a heatsink. It will likely have thermal grease under it. They are often about 1/4 to 3/8 inch square with a metal ta ... Flat Panel Televisions

I have a sanyo dp46848 46 inch lcd flat screen. It started messing up by half the screen having a dark tint. I was told it was the main board. I ordered one and told them it was a 1AA4B10N21300 with N6EE on the tuner. once I receved the new board and installed it the tv would not even come on, I then noticed the number on the tuner was N6ME. This new board also has a place for a plug the old one dont. could this be why it will not turn on? And yes i can put the old board back in and it will come


Yes, you need the proper board. the n6me is a different out put than the N6EE ... Sanyo DP46848 LCD TV

I have this RCA universal remote but it dont work with my sony bravia tv mod= KDL32L5000 i dont know why every code i put in there it doesnt work so can u help me with that can u tell me the codes for this asap thank u


Try buying a Sony universal remote. Sony does a good job of pairing their products meaning you might not even have to enter a code with one. Other than that I can't seem to locate any codes for that specific model. ... Flat Panel Televisions

I turn on my rca sdtv and it goes right back off dont know why it is doing that can you help me


... RCA TruFlat 27F520T 27" TV

I came up on an RCA projection hdtv model: R56WH78


... Projection Televisions

My zenith plasma 42w46x tv. doesnt show pic. the sound is there but no pic. I opened it up and founf out the the board on the right side of the tv(looking at it from the back) has two fuses, one of them is blown out, and when i replace it, when the tv is turned onit make a slight buzzing noise and the the power is turned off. but if i dont put no fuse in the box it turns on with the screen black.


Hi.The board you are talking about is called Z-sus. Its role is to sustain power to the plasma panel. If the Z-sus board fuses keep blowing, then the board is usually shorted, and the repair is done replacing the board.In some case ... Flat Panel Televisions

Toshiba 42H83 42 in. Rear Projection HDTV had the hyper module capacitor problem that Toshiba put notice out about. Changed those then plugged set in picture came in the three lamps noticably showed green,red, blue at the bottom of screen noticed grey static area because TV was not connected to cable or other device. Suddenly TV turns self off, now when plugged in to outlet power light blinks three times set turns off with speakers acknowlegement(sounded like speaker). I apparently have power d


If you bought a hypermodule rebuild kit from www.TvRepairKits.com go back to their site and ask for help. If you just bought parts off the web and winged the repair its hard to ... Flat Panel Televisions

My tv is a ct32g19j model, was cleaning the screen and the tv was on,(i know that is a NONO) but is sitting on a metal holder and put my on on the holder and the static from my body shut off the tv. This has happen before and I fixed it but the manuel is in oregon when i plug it back in all I can hear is a ticking sound comeing from the TV please help.


The fact that it was sitting on metal holder has made the problem much worse than before - the metal has provided a pathway of a much better conductivity for the static discharge and has made it much more powerful.\012\012\012Unfortunately the ... Panasonic CT-32G34 34" TV

My tv is an old rca tv, i have a dish network remote, one of the kids locked out the tv and i dont know how to get it back on, it wont tell me a anything all i can do is change the tv with the remote, nothing else what can i do??


If I read your post correctly it sounds like, the remote no longer works the volume or power for the TV set. If this is correct follow the steps below for a Power Scan. If this is not the issue or the steps don't work feel free to contact me and we w ... RCA 32F531T 32" TV

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1972 seconds