Having problems with your Flat Panel Televisions ?

Are there any further info about the problem of low audio and inputs does not work for L32WD250YX1? Oly one channel for the tuner has a picture the other channels has low audio only.



Answers :

The problem you have mentioned is due to faulty digital and analog singal processing circuits. The simplest way to resolve this problem would be to replace the main audio/video board. If you would like to replace it yourself then please remove the back cover of the tv and get me the part number off the large board that has all the inputs. Replacement board usually costs around 75-100$

Repair Help & Product Troubleshooting for Flat Panel Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

Are there any further info about the problem of low audio and inputs does not work for L32WD250YX1? Oly one channel for the tuner has a picture the other channels has low audio only.


The problem you have mentioned is due to faulty digital and analog singal processing circuits. The simplest way to resolve this problem would be to replace the main audio/video board. If you would like to replace it yourself then please remove the ba ... RCA L32WD250 32 in. LCD HDTV

TV 2 oldies but goodies..............first problem with the Panasonic...it shuts off a couple of minutes after U turn it on, then comes back on by itself. Does this a few times and then continues to play fine. Very anoying. Second problem is audio with the Toshiba. Thru the cable into the turner...snap..crackle..pop. Using the video 1 & 2 inputs, the audio is fine. Im thinking on this one the cable hook up on the tuner broke loose. And finaly the picture has the slightest tilt from left to righ


The slugs have nothing to do with tilt; unless a tilt setting in main menu bonded yoke has no adjustments for this issue. ... Standard (CRT) Televisions

I have a Sony Bravia kdl 32w5500 and it periodically switches itself off whilst watching programmes on one particular channel (WIN TV AUSTRALIA). It goes into a kind of sleep mode or something and sometimes also switches off completely. When it first loses picture, and sound, the green light is on and you can change channel and the picture and sound comes back but when you go back to WIN TV it again switches of picture and sound and eventually the whole set, if left on WIN TV. The remote channel


... Sony BRAVIA KDL32V5500 32 in. TV

My 23pf9966 doesn't recognize the HD cable input (no cable picture). I can change the channels & volume, but all channels are just snow and no sound. There is one channel that is blank, but no volume control comes on. Just a black screen. The channel seems to change, if it's the blank one and I count up 2 channels, then go back, it will be snow again. What is going on??


The tuner - the part that actually selects the channels from the signals on the cable - has failed and it will have to be replaced.\012\012\012This involves careful desoldering of the old part, the purchase of a compatible replacement and its v ... Philips 23PF9966 23 in. HD-Ready LCD Television

PICTURE STUCK ON ONE CHANNEL, GHOST CHANNEL OVER THE TOP OF THAT AS YOU CHANGE CHANNELS...STILL SEEING THE CHANNEL THAT IS STUCK IN ONE PLACE... 55 INCH HATACHI ULTRA VISION....


This is called image burn, or image retention. There is no cure for this. The image has been burned into your picture tubes from having the same image tuned in for too long. ... Hitachi 57S715 57" Rear Projection HDTV

My wt-46809 Still has a good picture. It receives its signal from an HD converter box from Time Warner Cable. The other inputs on the tv however don't seem to work. I can't use my DVD or hook up any game systems through the various inputs. In addition, while the HD channels (1000 and up) work, channels 1-999 don't project a picture (only audio). I've never added any HD retrofit to the set, so I'm not sure if true HD is being projected or if the picture is just very good digitally clear SD.


\012TV needs servicing PLEASE TRY THE BELOW FIRST THEN DO A FULL SYSTEM RESET\012\012\012CERTIFIED TV EXPERT HERE, follow this information I provided 3 long solutions to this issue/s Solution 1 Before we start taking things apart, lets try your ... Mitsubishi WT-46809 46" Rear Projection Television

How does one converter box get a certain channel with no audio and the other box doesnt get that paticular channel at all when scanning for available channels?


If you don't have remotes specifically for your converter boxes you are unlikely to succeed in getting set up ... Standard (CRT) Televisions

I have connected an Explorer 4200HD converter box to a Sharp LC-46D92u using Pr/Pb/Y and red/white audio cables. i have the tv channel on 3 and i am not getting a picture or sound. i do get the channel info when I hit the "Info" button on the Cablevision remote, but no picture or sound. What am I doing wrong?


Hello\015\012You have now connected your TV with your converter box as component video and AV. Now your TV is only the monitor for your converter box. You ahve to select the input selection on the TV to select the input as component video as ... Sharp AQUOS LC-42D85U 42 in. LCD TV

I have a TCL L42M61AZ LCD TV. I find that the "Channel 9" programs in Adelaide, Australia, namely GEM, GO and Channel 9 DTV will not show a visual picture, only play audio. All other programs are fine. I have reset and rescanned many times including manual installations. They operate on the 191.6Mhz frquency which the scanner picks up and installs, but as stated, with sound only. No picture. Any ideas?


A firmware update from TCL will fix the problem. Call them and they will send out the firmware and a serial cable (required for update) for free.I did the update yesterday and it fixed the problem (sound but no picture).You will need a PC ... Flat Panel Televisions

I'm in Iraq. We use the MMDS system for broadcasting AFN programming. One of our military has a Shownic, flatpix. I tested his incoming signal and both audio and video are fine on our test equipment. On the TV though, he is only getting picture and a snowy one at best. The audio is nothing but noise. I've attempted to change settings to "M" but there is no option for this and the options available do not do anything to correct the issue. I also attempting MFT'ing and when I did obtain "snow


... Flat Panel Televisions

My RCA flat screen was working just fine and than as I was watching TV the screen flickered off and the it started flashing unusable signal. I did a rescan of the channels a couple come back that I have never had before. The sound doesnt work on the few channels that I do get and the picture and sound doesnt work on the ones I use to get. I also tried to put a dvd in. The sound works but not the picture doesnt. What do I do


... RCA Flat Panel Televisions

My TV repeatedly shuts off after being on for 30 minutes or so. then this morning it would not turn on at all no audio or picture the green lamp and red timer lights were flashing the tv had not been in use prior to this. I pulled the bulb ordered a new one then put the bulb back in and the picture and audio came on when i turned it on again help!.


OK, I am assuming you mean that after turning it on, or turning it off and on again that you again had no picture or sound.There's a good chance you have failing electrolytic capacitors either in the power section or the inverter section ... Flat Panel Televisions

Sir, i have sony trinitron tv model kv-2185ge-vit system with 80 channels tuner. how to get more number of channels in this tv as some one suggested to replace tuner with higher capacity. pl give a solution. thanks, dkvrao


... Standard (CRT) Televisions

I've LG 42ld450 television with cable tv connection. i don't have any problem with video but problem with Audio. i'm using auto tuning option for get the all channels after got channels i only got videos but not audios. after check the manual option don't find BG option in system. one of my friend using same TV but he got this option of BG in manual turning and i can't changed it to Stereo. need your help!


... Flat Panel Televisions

I have a Sharp AQUOS LC-26DV22U 26 in. LCD TV with a built in DVD. When I turn the TV on it will come on as it usually does (the please wait appears in the lower left corner and moments later in the right hand corner the channel box appears and then the picture comes on) and after about 30 - 45 seconds the screen goes blank, the audio stays on and I can change the channels with no picture. When I turn the TV off and wait a couple seconds and turn it back on the "please wait" that appears in the


... Sharp AQUOS LC-26DV22U 26" LCD TV

My Vizio M261VP was purchased three weeks ago. A week ago, the audio on channels other than the digital HD channels are very low. For example, an analog channel or Netflix via the VIA the volume needs to be set to the high 80s to hear anything. However, when I switch to a digital channel the volume can be heard reasonably at around 20-24. Should I just return this television or is there a firmware upgrade?


I would return the Set ASAP! TV has a factory defect,take it back and get you another TV, \012and If it happens to do the Same thing Then Company might have more then several TVs that must be returned to Factory. \012I had a Friend of mi ... Vizio M261VP 26" LCD TV

Dtv Tuner Sunkey ATB150S hooked to antenna and TV box gets hot and only one channel comes in


... Flat Panel Televisions

Rechannel tv GVA PDP3208- stuck on 1 channel only. I tried to follow solution: menu>picture>mode(enhanced setting only)>power up(max)>exit and then go back and use auto install, but still one channel coming out even if I switch to other channels.


... Flat Panel Televisions

Channel 9 on TCL tv has no picture.. have tried to re install but all other channels are fine except this one.... channel 9 is working on atv but not DTV please help me??


Is channel 9 offered in DTV? ... Flat Panel Televisions

I've had a Toshiba 27A50 tv for just over ten years. I have cable hooked up to the tv without a box. For whatever reason, the last couple months our channel 4 (which is NBC) has a static sound in the background but it is the only channel which has this issue. The picture is fine. Not sure why it would only be happening on one channel and no issues with any of the others. Any help would be appreciated as to what potentially may be the problem and if there is anything I can do or check to help


... Toshiba 27A50 TV

I bought a TOSHIBA 32KV500B tv. At the Initial Installation mistakenly I selected "yes" for 'do you want to search analogue channels?' guestion. And then I lost all my automatically selected digital channels and I cannot go back to retune the channels. I have no SETUP in the main menu and then no INSTALLATION option. I have 6 main thing: picture, sound, feature, install, program table, Source: tv. I have tried to use the APS but this one retunes the analoge chanells only. Please help me how I c


I had this problem and searched the internet for hours looking for an answer and was given the initial same reply as this and it does not work. To solve this problem all you simply need to do is press source button on the controller followed by press ... Toshiba Flat Panel Televisions

RCA Truflat TV, just hooked up Verizon Fios: Got Audio, No picture


... RCA Flat Panel Televisions

KDL-32S3000 Problem. We broke remote, so got a new one coming. However, The screen will be normal for 15 seconds or so and then a black bar will appear at top. On the left top of the black bar it will display the input in use "HDMI 1". To the right just under the bar #In the picture# it displays the picture mode "16:9 1080i HD". On the left 3/4 of the way down the screen it displays "Power Saving: Low". After about 15 seconds the screen will refresh and go back to its regular full screen. This k


Its asking you to adjust power on the main power box it sould be under power saver adjust level it to low it should be in your menue and then your main power setings. ... Sony Flat Panel Televisions

My sanyo hdtv shows no pictures when you turn it on (the screen is black) but you can hear the audio. The remote control can change the channels and volume up&down but the picture won't show


Good day!The problem of your TV could be the inverter board or the cold cathode light is busted.Follow this instruction on how to fix that problem:\012\012Remove the back cover of your TV ... Sanyo DP32648 32 in. LCD TV

I have a Nesa car DVD system. Has Nesa roof screen, dual channel wireless headphone, a Turbo 1 Pac line drive and a broken 2 channel a/v controller box that has no name. It is black with 4 audio inputs and 2 video inputs and a broken slot to the monitor. All the inputs are on the long side. The system was put in 2003. No one here can find it nor repair it. I have looked on the internet with no luck. My autistic son needs it. Can you help?


Since you have a Turbo 1 Pac line drive it means that the AV controller is used only for the video. Since you have just one source you could just bypass it and connect the monitor directly. But, without more details, as in model number of the monitor ... Flat Panel Televisions

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1505 seconds