Having problems with your Projection Televisions ?

I no longer have any Red color. Only yellow and blue. I've fixed a problem with a fuse on the deflection board. That fuse kept blowing so I re-soldered the FBT and it worked for several months. Now my red doesn't work. This just began last week and I didn't see any evidence of anything blowing. What are the potential problems, how can I narrow down what is the precise problem, and how do I fix them?



Answers :

The most likliest cause would be a issue with the RED CRT drive board around 35.00 from www.tvrepairworld.com it could also be an issue with the RED CRT itself but thats doubtful as usually the set will shut down if the CRT itself has an issue.

Repair Help & Product Troubleshooting for Projection Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

I no longer have any Red color. Only yellow and blue. I've fixed a problem with a fuse on the deflection board. That fuse kept blowing so I re-soldered the FBT and it worked for several months. Now my red doesn't work. This just began last week and I didn't see any evidence of anything blowing. What are the potential problems, how can I narrow down what is the precise problem, and how do I fix them?


The most likliest cause would be a issue with the RED CRT drive board around 35.00 from www.tvrepairworld.com it could also be an issue with the RED CRT itself but thats doub ... RCA HD52W66 Projection Television

The power light flashes green likes it turning on then flashes red. Is there a fuse problem. I just replaced the bulb less than a month ago and it worked fine the last 3 weeks.


Good day!That problem is usually happen when the power supply or main board have defective parts not fuse!.Lets find out the problem.Follow this simple and easy procedure of troubleshooting:\012\012 ... Sony Grand WEGA KDF-55XS955 55" Rear Projection HDTV

I have a fuse problem it went out after 2 years and put a new 1 in it lasted 5 mo. anouther new 1 it lasted three weeks. Can i put in a stronger fuse?


If a fuse is blowing, it's usually caused by a short somewhere and is intended to prevent further damage or a potential electrical fire. It's generally safe to use a fuse rated for ~10% more current, but if it still blows out, I'd recommend taking i ... Vizio P50HDTV20A 50 in. Plasma HDTV

My tv (46in led) wont turn on. the power button blinks red on the tv rather than remaining the solid red when on standby. what is the problem? it is not a burn fuse or anything?


\012 \012 \012 \012 \012 Hello,first, ... Insignia Flat Panel Televisions

I had LG 50pc1da Plasma TV for the last 5 years never had problem untill last week. The screen keeps blinking, I can barely see the picture, the sound is ok. Ysus board making ticking sound matching the screen blinking. Please help how to fix it?


Visit the site named 'Electro-help' for\012more details. Check this link and\012select the site named above. View it\012in 'Flip card' opti ... LG 42PM3MV 42 in. PLASMA TV

We bought a new Bush 42 Inch 3D TV about 4 weeks ago and came home today to discover it would not switch on. To begin with the red light was on but the remote control was not doing anything. When we turned the TV off at the socket and then turned it back on again the red light did not even come on and we still cannot watch TV. Nothing happens when we push any of the buttons. We have tried the TV at different outlets and have changed the fuse in the plug. Is there some way we can remedy this?


... Flat Panel Televisions

I have Vizio XVT3D474SV I bought a year ago, in the last week while watching TV, the screen start to flash, display becaome white with 3 black lines and after a while it becomes black (the all time the sound stay as normal). while looking inside I see the backlight flashing till the screen becomes dark (than I do not see any light inside). After turning off and ON the TV several times I get back normal pictures but the same phenomenon comes back in few minutes. I checked all 8 micro fuses I have


When the picture is dark, show a torch light on the screen from a safe distance. If you can see the picture, the backlight is the problem. Anyhow, it is better to show it to a qualified service technician. ... Vizio XVT3D474SV 47 in. 3D LCD TV

I have a Sony KDF-50 WE 655 and I suspect the fan that allows the lamp to come on is not functioning right. I have to wait for the fan to come on before the TV actually comes on. If the fan does not come on all I see is 6 red blinks right after I try to turn it on. Is this a fan problem? or it maybe the thermal fuse as well? Thanks


... Sony Grand WEGA KDF-50WE655 50" Rear Projection HDTV

Hello, (**please read**) I know everybody asks this question about Westinghouse products, but I am no newbie to the problems. I have a Westinghouse (SK-19H210S) and it has gone bad once, but I repaired it myself. It has (for the longest time) been randomly flashing off then back on for about 1s (only when i have my PC hook up to it) last week it did the same thing except this time it didn't turn back on. I have again, bought and replaced the bad capacitors that I see. I turn it on only to


Replace the power supply Bad caps are only part of what can happen with power supplies chances are you have a regulator issue or a transformer has failed. Replacement power boards are available at ... Westinghouse SK-19H210S Television

This tv was used outdoors under a covered patio in south Louisiana, which means high heat and humidity. When not in use it stayed covered with a large trash bag. The problem is I get no response (lights, sound) when powered on with the remote or locally from the set. I've since had it inside for app. 2 weeks and still nothing. I have verified my power sources to be good. I don't know if there is an internal breaker or fuse or anything like that. This tv is a couple years old. Thanks for any he


The internal power supply has failed, possibly due to bad capacitors. Get it repaired. ... Toshiba 26AV500U 26 in. LCD HDTV

I have a Hitachi 50UX19K rear projection tv. It worked last night, then today I went to turn it on, the light came on for about 1 second and then clicked off. After that it will click, but nothing happens. Once I unplug the unit, it try to come on for the 1 second and click off again. I can see no burnt or obvious sign of problem. I have some back ground in electronics. Is there anything I can check with an Ohm meter? I recently installed a remote controlled outlet in line to save ele


Hi.If the remote controlled outlet caused a power surge, this may have damaged the PSU.As a matter of fact, if the TV shuts down completely after clicking instead of going to forced standby (protect mode), then the part damage ... Hitachi Projection Televisions

I have an old Toshiba CF27E50 chassis no. TAC 9515 that has had no problems until last week. I went to turn on the power and the red light flashes continuously, but the set does not turn on. I have unpluged the set for an hour and tried to turn it on again, but the same thing happens. I have tried to turn it on using a universal remote and using the power switch on the front of the set. Can this be fixed or not?


This is a protection circuit that prevents the tv from coming on (to stop damage of the components) ....you need to check your voltages off the power supply and make sure they all read well (EX: 2 ... Toshiba 27A44 27" TV

I have a JVC LT-42e488 LCD tv. Bought it in 2008. Last week in the middle of a movie, the screen washed out. I can still see what is going on but it's washed out so much if gives you a headache to look at it. Whites and Grays and pinks and reds are too bright. It does it on DVDs and cable. Can you give me an idea of what may be wrong? I'm desperate and afraid to get taken advantage of at a tv repair shop. $50 to tell me what is wrong with it and who knows what else.


... Flat Panel Televisions

I just purchased the TCL42U25 42 inch. My problem is that it seems like the screen is very dark. even if i change the picture mode to Vivid, which is the brightest mood, the screen still looks dark. for instance, i was watching an HD movie last night and it was a dark scene and i was honestly not able to see anything versus my other HD tv. I was wondering if u got any tips before i return this tv?


... Panasonic TCL42U25 42 in HD-Ready LCD TV

I bought a new LG LED TV 32LV375G and connected it up. After 2 days working fine it began to switch off after approx 5 mins operating. I measured the mains voltage and found it 249volts. I called the electricity provider and they came to change the supply to another phase with lower voltage. It worked fine for 4 months and repeated the problem last week. I quickly measured the mains voltage and found it 244volts. I took it to a technician and was told that everything is fine with the tv. I g


... LG Flat Panel Televisions

In between ltl 19010205u umec parts looks brown like a burn i dont see any bad capacitors,but there is a red fuse thing that looks like it milted a droplet down itself.the red fuse thing is located next to the black capacitors its intact.As im looking a second time i see a red coloration on the black capacitor inside the shield with the three screws.what should i do?


... Polaroid FLM-2601 Television

My Sharp Aquos LC-26D44E-GY in the spare room has stopped working. It worked ok about 2 weeks ago, went to switch it on last night & its dead. We had a thunder/lightening storm last week? Ive changed the 13A fuse but its still dead. Is there an internal fuse that could of blown?


First check your power outlet, try connecting the TV to a different power outlet. Then see whether the LED light on the TV is on or blinking. Anyhow, this might need attention by a qualified service technician. ... Flat Panel Televisions

My sony trinitron color tv (model KV-XA21 M83) has been having a problem over the last one year. The TV mechanic on his last visit was unable to diagnose the problem as it started working when he was present to check the problem. Now it blinks 2 times (red color) and does not turn on. I would be very grateful if you could suggest what needs to be done.


... Flat Panel Televisions

Samsung HP-P4271 42 in. HDTV Plasma power problem. When plugged in, won't turn on, just red standby light. Checked fuses (has continuity), capacitors (visual looks good), noticed blackened bulb near fuse in power board... could this be the problem?


Yes,this is the problems,might have bad plasma screen panel itself.Have a tv tech.to check it out.If the plasma screen panel it dead,tv not worth repairing.Plasma screen itself will cost the same as a new tv,if u able to buy it. ... Samsung HP-P4271 42 in. HD-Ready Plasma Television

Hello, I have a LG 50PQ3 (50 inch plasma). I was watching TV last night and then suddenly lost the picture. I can hear, but cant see anything. I turned on and off etc but could not see anything. Any ideas? Thankyou in advance


... Flat Panel Televisions

Channel master d2a digital box converter is not working. It has a red light on it and it's normally green. this has been going on for a week and nothing is showing up on the screen. What is the problem? the manual says when the light is red, it just booting up. it doesn't take a week to boot up.


... Flat Panel Televisions

I own a Philips DLP television model 50pl9126d/37 I just replaced the lamp on it less than 6 months ago and the red lamp failure light came on. I have opened the back and can see the lamp starting up for about 5 sec but then it quits. I have read a number of issues but was wondering if anyone who has had this similar problem figured out the solution. I have pulled out the lamp ballast but as far as I can see there is no sign of damage. When the ballast was in I removed the lamp and could see the


You might want to with a flashlight and or small mirror want to look where the lamp faces at the color wheel---it must be intact and not missing any segmentstypical color wheel: ... Philips 50PL9126D/37B 50" DLP TV

My Mitsu rear-projection WS-B55 was purchased in '03 or so. Now the screen is sometimes turning red. I can do a system reset, and the color goes back to normal. Then it eventually (maybe days later) goes back to red. You can still see the picture, it's just all in reds. Maybe a lamp going out? We never have replaced anything on it.


No,pictures go all red?Pictures have colors shaded shadows or 3D pictures look alike?Yes,than the tv it is developing a problem known as a convergence problems it dying.The tv convergence board have problems,must be resoldering those 2 or replaced 2 ... Mitsubishi WS-55809 55" Rear Projection Television

When I turn my tv on, within a few mins the picture starts to turn red untill it is solid red and you cant see anything but red


Hi,\015\012 Your tv has problem with the base board. you can see the base board on the picture tube neck. To see the base board you have to open your tv. The problem is dry soldering of component in the base board. ... Sony KV-32FV27 32" TV

How do I find the power board in a 1997 big screen Sony TV to check the fuse? How do I check the fuse? I live in a house built in the 1890's, and last year there were 2 different tornados ,within 2 weeks of each other, that blew over trees on top of my power line twice in 1 month. My TV hasn't turned on since then. Is it the fuse I need to be checking? Should I replace the power cord, maybe just the cord is fried? It wasn't Although it was manufactured in 1997, it is still a very large, nice t


Here i like all responses to you post.Gazebo, Patio Heaters, ... Sony Standard (CRT) Televisions

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1503 seconds