Suggested Questions/Answers :
It is recommended you read all this kind of situations
My RCA flat screen was working just fine and than as I was watching TV the screen flickered off and the it started flashing unusable signal. I did a rescan of the channels a couple come back that I have never had before. The sound doesnt work on the few channels that I do get and the picture and sound doesnt work on the ones I use to get. I also tried to put a dvd in. The sound works but not the picture doesnt. What do I do
RCA Flat Panel Televisions
I have Samsug LN-S2651D TV. Recently the screen turned green (no picture). Sound works fine. Cable remote will cycle through channel changes OK. Cable 'TIVO' appears to work OK. TV Menu's seem to work OK. Picture menu: Mode=Custom; Size=19:9; Digital NR=On; DNle Demo=Off; Film Mode=Off; Blue Screen=Off. How can I get the picture back?
Samsung LN-S2651D 26 in. LCD Television
I recently moved and had my jvc big screen tv hooked up to direct tv through a hdmi cable i get picture but no sound I had this problem before when i had it hooked up the first time the direct tv guy messed with th tv settings and got it to work but i dont know how he did it and now ive moved and am having the sound issue again how can i get the sound to work on hdmi it works on everyother input channel
JVC HD-52Z575 52" Rear Projection HDTV-Ready Television
Turned on the TV one day and there was no picture but sound. turned it off and then on again and had no sound and picture.
Now when I turn it on some times I get an odd pixilated image. other times I get the default blue screen that slowly gets brighter in some areas and some times it works fine.
Model: Polaroid 2611-TLXB
Flat Panel Televisions
I have an Insignia NS-LCD42HD-09 42 inch flat screen tv. The HDMI input works, but the component cable says no signal, and I only get cable on two channels. All other channels say no signal. The two channels I get have both picture and sound, and it is not my cable company because I plugged in another tv to the same cable, and everything works fine. I've had this TV for almost three years.
Insignia NS-LCD42HD-09 42 in. HD-Ready LCD TV
My Lg Flatron was working good but suddenly i cannot see any picture on it nor any channel is getting tuned after changing to AV mode the DVD gets connected ,tried setting the cable channels by surfing but still the problems persist.There is no picture nor any sound on TV mode only a blue screen
LG Standard (CRT) Televisions
My LG 42LM620T Led tv has sound but no picture, what could be wrong.?
One day, while watching TV suddenly the picture went off, but there was still sound. Thought I might have pressed some thing remote, tried all options but nothing worked. Switched off, removed the plug but still no change. When switched on I get LG log and picture for a second and then goes off, only sound stays. Tried with different inputs still the same. When flashed light on the screen I could see faint images. Opened up th
LG 42LM6200 42 in. 3D LCD HD Cinema Smart TV
Im trying to hook up my first gen 60g ps3 to my sharp lcd monitor, pn-455. im using hdmi for my ps3 - dvi for the monitor. all i get is a black screen. i've tried doing a hard reset and still nothing. if i use the component cables for the monitor it works but the picture is not 1080i. if i hook up the monitor to my laptop with the same hdmi-dvi it works with my laptop. why doesnt it work with the ps3?
Sharp PN-455 45 in. LCD Television
My rca flat screen was working fine than all the sudden it went blank and started flashing unusable signal. I get a picture on a couple of channels but with no volume. I then also get no pic with my dvd player and sound only. Im so confused because I was sitting there watching tv then all then sudden nothing works correctly.
Unplug the set for a while, also a cable or sat box or home receiver and power back each to allow them to try to reboot. ...
RCA Flat Panel Televisions
Dark screen husband rolled over on the remote, have directtv all other tvs work well just this one dirrct tv says its the tv not them scsreen is dark can see red green and blue thats all the light it puts out also it seems to be in analog mode and I can't see the screen to try using system setup I tried going to tv mode and changing the channel to line one to or aux/ but can't get it to go there any ifeas
Sansui TVS2750 27"
Picture I was litening to music threw direct box,vacumming,different outlet then tv. turned it off,& used converter box buttons to change channel. got no pic no sound. pushed more buttons,turned it off, then on hit reset, pulled card out put it back,then turned around to get remote, and saw my 82 yr. old dad holding remote as far out as he could,as if he was trying to get around me! I asked him what button he pushed & he said none. now we have sound no pic. it turns on deep blue screen no menu
I assumes that there is a confused memory IC inside, due to improper data inputs. Try a hard reset to this set. Unplug it from AC mains wall socket, and re-plug it back after 10 minutes of so. This must make it a hard reset. If it do not help you ...
Samsung 50 in. Plasma TV
I have an LG LCD TV...model #52LD550-UB.AUSMLFR. Was working fine last night, turned on this morning to a massive white screen. It still has sound, just on a white screen. I turned on the surround system and have picture on that using the AV1 component, but nothing when using the HDMI1 component. Tried changing the cable, thinking it was the HDMI cable that went bad, with no change. This TV is only one month old. Help!
Flat Panel Televisions
I have had my samsung LN40B530 for 2 days now (got it used) BAD IDEA I Know I just dont have the $ for a new one anyway... everything was fine worked perfect and all of the sudden the picture almost paused it was moving very slowly and the colors were blending strangely I turned off the tv and turned it back on. All i have now on the screen is vertical lines white, blue, red and green. no picture sound is still there as well as all of the buttons being functional. Just vertical lines. I am a ver
The T-CON board is the place to start. If everything else is working (i.e. change channels, sound, etc) then this is almost certainly the problem.\012It's possible the problem is the connector(s) to the T-CON board. Over time the co ...
Samsung LN40B530 40 in. LCD HDTV
I have a toshiba 52hm84 I just recenlty put in a new bulb and it has been working great. today I turned on the television and would get a good picture for about 1-2 seconds and then the screen would go black. I would change the channel and onlly get sound. Any ideas on what the problem might be?
Make sure the bulb door is secure..if not it will shut down the bulb ...
Toshiba TheaterWide 52HM84 52" Rear Projection HDTV-Ready Television
I have a Sony KDL-46S4100 LCD that was given to me that doesn't work. It powers on and the power LED is green and the backlight to the tv works and stays on as well but I get no picture or on screen display such as the menu. I can hear sound from the speakers when the input is set to the correct one. I purchased a replacement T-CON board but the problem persists. If I do the LVDS cable wiggle test I can see noise come up on the panel. It varies from vertical lines of different colors to whe
Sony KDL-46S4100 46 in. LCD TV
I have a Westinghouse 26 inch LCD tv model ak-26h240s. We watch only 2 channels on this set twice a day. Lately when we turn the TV on we momentarily get sound then the sound goes off. We tried other channels and they work fine and we receive sound...but not on our preferred channels. During different times of the day we will turn these two channels on and everything works perfectly. BTW, this television is in our bedroom and we use it to watch morning and nightly news.
Westinghouse 26" LCD Flat-Panel HDTV
Philips 42pfl5522 LCD TV.
Digital channels no longer work, when i select the digital channels with the remote either with the Digital MENU button or the EPG button I just get a small blue cross appearing in a box in the top left of the screen. Using the A/D button or the AV selection button simply takes me to a blue screen.
It's the first time the TV has been used for a few months (having been to Australia for a while) but it did work when we got back for about a day.
I'm not sure if
Flat Panel Televisions
I have connected an Explorer 4200HD converter box to a Sharp LC-46D92u using Pr/Pb/Y and red/white audio cables. i have the tv channel on 3 and i am not getting a picture or sound. i do get the channel info when I hit the "Info" button on the Cablevision remote, but no picture or sound. What am I doing wrong?
Hello\015\012You have now connected your TV with your converter box as component video and AV. Now your TV is only the monitor for your converter box. You ahve to select the input selection on the TV to select the input as component video as ...
Sharp AQUOS LC-42D85U 42 in. LCD TV
LE40R7 tv mono up on screen, cannot access dtv, only one channel which freezes, tried to reset using info mute etc doesnt work on my tv, any suggestions please
Samsung LE37S71 37 in. HD-Ready LCD TV
Rca p61939 My Rca projection tv worked just great then one day went to turn on there is nothing. I have sound but absolutely no picture. I have checked all cables, tried different cable box, dvd boxe etc. Nothing shows up on the screen at all, not even the standard channel indicator. What is wrong and can this be fixed and how?
RCA P61939 61" Rear Projection Television
Sanyo lcd32k30td tv has blue screen , get sound no picture , cannot change channels or use any controls on remote or side of tv.
Switch it off for 10 seconds .. then press button TV/AV its probably due to power fluctuation .. if the problem occurs check for local warranty service or service center ...
Sanyo DS32920 32" TV
In the process of my move, lost my Niko power cord to my OTP-2011-R flat screen. When the cable man tried to hook up my cable connection he used a universal power cord. Although we were able to get sound, there was absolutely no picture. The day before my move, the TV was working perfectly. Is the problem in the universal cord connection or in the TV? Niko seems to be out of business as all of the phone numbers for that company have been disconnected. Is there someplace I can buy a power
Using a different AC cord did not hurt your TV. Something more than likely happened internally during your move. ...
Niko Flat Panel Televisions
TV stopped working.
When turned on the green light comes on. The screen lighten up a bit. There is sound, But, no picture, cannot even see the channel or anything of the menu.
Bad Board somewhere? If so which one?
I've had 3 kdl32s2000 in the shop in the last 3 mo. ad all were display panel problems ...
Sony BRAVIA KDL-32S2000 32 in. LCD HDTV
My magnavox 32MF231D/37 tv will not show color from any aux input location and it keeps loosing sound and picture. sometimes i have to auto program channels to get it to work.
Philips 32MF231D Television