Having problems with your Flat Panel Televisions ?

We have a LCD Electron TV recently purchased from Walmart and we are trying to find the code to program an RCA universal remote control to work with it, but we are having problems. We tried everything that the directions say and nothing seems to work. Can you help?

Answers :


Visit the below link, it is a RCA remote code finder.

Enter your RCA remote model, the select TV, then search. This should help in getting the code...

Good luck.

Repair Help & Product Troubleshooting for Flat Panel Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

We have a LCD Electron TV recently purchased from Walmart and we are trying to find the code to program an RCA universal remote control to work with it, but we are having problems. We tried everything that the directions say and nothing seems to work. Can you help?

Hello,Visit the below link, it is a RCA remote code finder.Enter your RCA remote model, the select TV, then search. This should help in getting the code...Good luck. ... RCA Flat Panel Televisions

I have a Mitsubishi TV, Model VS-5011, Serial # 112892... yesterday I tried to use the PIP to watch a baseball game and also a movie... we have Direct TV and everything was working fine until I tried to use PIP... then the screen went to a snowy effect on ANT A and I cannot seem to do anything to get it back... can you help me... any help would be greatly appreciated... thanks, Susan

Hello Susan,\015\012\015\012As you have DirecTV, I'm assuming it's connected to the TV with an AV cable rather than a coaxial cable.\015\012\015\012In this case, you can get the DirecTV channels back by pressing one of the ... Mitsubishi Projection Televisions

HI!!! I just came back from work today and when I turned on my TV through my Direct TV remote control the TV didn't turned on. I tried to do it through the TV's remote control and it didn't work either. I reprogrammed the cable's remote control and did everything I could and is still not working. The TV doesn't work with any of the remote controls. Please help me!!!

Might be a bad IR sensor. Does the button turn the tv on? ... Flat Panel Televisions

Hi-rn Thank you for being here- We were watching our Sharp Flat Screened TV, beautiful nice picture. We noticed when we hooked the cable up for Direct TV in our new home, the input connection point was bent and slightly loose. We attached the cable and everything seemed fine. Tried to move it back to the wall and the picture became distored w/ snow and it's saying 'analog' on the screen. Is there another way to connect it to the cable other than that particular connection point until we ca

With Direct TV, you should use the video input (composite video- yellow/picture, red/right stereo, white/left stereo)ORcomponent video- (green/video, blue/video,red/video white/left channel stereo, red/right channel stereo)t ... Sharp Flat Panel Televisions

When i try to connect to netflix, it says it is unable to connect to the server, but when i test the connection, it is connected but cant download. help

... Vizio VF550M 55 in. LCD HDTV

I am currently trying to connect a laptop to my TV monitor for watching Hulu and some wmv files. Everything is fine on the laptop and when i connect via an SVGA cable everything is fine for 10-40 minutes when the center of the screen scrambles suddenly, if i shut th tv off for a few minutes the issue goes away for a while and then starts again. I have changed screen noise reduction to high, tried both video and text modes and nothing helps. If it is relevant this is the second laptop that has

Tries go into the computer Control panel go to monitor resolution change it lower resolution like 1020 to 800 should solved ur video problems,scrambling video is tv not supporting the current resolutions. ... RCA MM36100 36" TV

Sony Trinitron KV-35XBR48 tried everything to adjust colors, can only get orangy/browns and blueish tints. Also, it blinks off every so often. Bought this used, have tried everything to fix it. Any help would be appreciated!

Sounds like your CRT is shot. Need to look for new set. ... Standard (CRT) Televisions

We accidentally hit some button on the control that made a big black square come over all our channels. We have tried everything and cannot get this off. We realize it is locked and have tried changing the code, turning off all power and everything. Cannot see TV, please help!

Hello\015\012Closed Caption function is set to On in your JVC. look if there any button marked as "CC" on its remote control. If it is there, hit it till the closed caption function go off from your tv screen. If there is no such button foun ... JVC AV-32D502 32" TV

Scan error We have a 55" LED TV that we just purchased 8 months ago and it works fine with our blu-ray player but suddenly won't work for the cable. We reset everything and when we try to do a channel scan it keeps saying "scan error". We've tried unplugging everything and checking the cable and there still is no change.

... TCL 55 in. Class LED 1080p 240Hz HDTV with 1/2 in. Ultra Slim Frame

The picture mode on my tv is stuck to wide. When I try accessing this feature through the remote's "p-mode" or "p-size" buttons it gives me an message on the screen that says "not available." I've also tried accessing this feature through the menu on the remote and on the side of the tv but I still keep getting this same error message. I tried reading through the manuel, but there is nothing under the troubleshooting area that helps or addresses this issue. Is there a way to reset the tv t

If it says "not available" then you have to try the settings of the input source such as a cable box or something. Chnage the aspect ratio to 16:9 . If you can get me the model number of the box I will see if I can get your precise instructions. ... Flat Panel Televisions

I have tried everything to highlight my channel manager in the menu on my 55HDs69 plasma tv so I can change my input from air to cable but nothing I have tried works any help would be greatly apprecia

... Hitachi 55HDS69 55 in. Plasma Television

No Signal Cable provider tried to troubleshoot problem of no signal, wthout success. They told me to contact Olevia directly and to ask for help wallking through the steps to get a cable signal. Need help with HD input.

You may have to guidelines given in the operation manual step by step and try resetting, if necessary. Also check whether the system/format transmitted through cable is supported by our TV. ... Olevia 227-S11 27 in. LCD TV

My sony KP-51WS500 needs reset. I hit a button on the remote and my picture went off. I started pushing buttons like an idiot trying to get the stations back and in the process it messed my picture up. I have tried everything. I can't get it ti set back to factory settings. Can someone please help?

It is possible that you messed up the convergance of the projector lamps on this TV. Try the convergance setup to see if this helps. ... Sony KP-51WS500 51" Rear Projection Television

I programmed my sudden link remote to my tv and turns my tv on an off, controls the volume, but when I try to change the channel of my television with the remote, the red cable light on the remote lights up as if it thinks I'm trying to tell it to change the channel on the sudden link channels and not the channels of my tv....help? (I know this sounds lazy because normally people would just say get up and change the channel but our tv buttons don't work and I don't have the original remote)

... Flat Panel Televisions

Vizio 26in I hit t button on the tv itself while trying to adjust the volume, now stuck on a blue screen saying " no channels available" I use a Comcast remote, how do I get out of this? I have tried everything!!!

Have you tried to unplug set and a box or receiver if used for a while?During the use the box may have caused the set to do this.Also a simple test with NOTHING connected is hook just a DVD player up and see if it works correctly (pro ... Flat Panel Televisions

I have tried everything but my Samsung LCD tv keeps saying no signal! Everything is plugged in.

Check and replace its main digital processor board. Visit the site named 'Electro-help' for\012more details. Click this link. View it in \012"T ... Flat Panel Televisions

I have a universal remote control new Quantum Fx REM-101 and im trying to make work with my tc brnd emerson model # LC320EMX i try every ting that says in the manual but still not work any one can help

... Emerson Flat Panel Televisions

Viewsonic N2635w says menu locked. Have tried holding down channel down key for over 5 seconds. Nothing happened. Whatever button I press on the remote it says menu lock. Please help me.

... ViewSonic N2635w 26 in. LCD Television

My Sony Blu-Ray BDP-BX37 player was originally registered thru Netflix which is working fine. However, I did not write down my 4 digit registration code. I want to connect to Pandora but need the code. When I try to find it under "Activate Enhanced Features" it says "device is registered". I have spend hours this morning trying to resolve this online with no success. My device is also registered with Sony Essentials, but I did not receive a registration code. Can you please help me?

... Flat Panel Televisions

I am trying to play movies from my computer using a HDMI cable, I have visual but have no sound from the TV, is it a problem with my computer or is there something I have missed with the TV, I think I have tried everything with both items, Help please

Check in the settings for the graphics card, with nvidia once you open the control panel, select change resolution and look for the connecter drop down, Mine shows hdtv-Audio enabled ... LG 42LG50 42 in. LCD HDTV

My dad cannot find the remote control for this Daewoo tv. The picture is small and there are black borders on either side. He turned the tv off and on again and it did not reset. He is in his 80's and my mom is bedridden, this is so important to them. They are in FL and I am in NJ trying to help them with everything I can. Please, I need your help! Isn't there something we can do to reset the picture to it's normal size?

Hi,You need tv remote to adjust picture size, there is no other option.Thanks. ... Daewoo DTQ-14N2FC 13" TV

Hi, the YouTube on my lg tv is not working I've checked my Internet connection and everything else on netcast is working but YouTube. I've tried turning everything off from The mains but still no results. Please can you help?

Was this ever solved ? Have the same issue with Facebook only..... ... LG Flat Panel Televisions

I have an LG 42PG20....One day it froze and would not turn off or anything....I unplugged it, and when plugged back in, it just flashes a bubble message saying FRENCH all over the screen. When I try to push any of the buttons on the tv, it says DVD HT. Behind the messages is just a blank black screen. Please Help!

Make a quick call to LG with that model number--most of their sets have a way to do a manual reset of the TV. ... LG 42PG20 42 in. Plasma HDTV

Model 42pa30rq i made took it outa the box and plugged everything in. tried to add my PS3 but when i put the tv on its face when i truned it up all the people look blue like smurfs! PLS help me ima Football fan tryin to get it right before the season start! Oh went thru the manual and tried the reset didnt work!

... RCA P42WHD33 42 in. Plasma HDTV

Hey i really need help with my computer monitor the sound it seem like its not working (no sound) (dead silence) at all the jack for the headphones nothing either not a peep. Everything is showing that the sounds working promptly even in control panel under hardware and sounds it says everythings working promptly. When i play a video or music it even shows the volume levels moving and working but no sound coming out of my monitor. I never had speakers i always listened to the computer monitor s

Hello,You have two things to check. 1. Drivers2. HardwareYou can just easily fix the software (drivers) side of the computer. Try scanning the drivers with RadarSync and you will know whether or not they are updated to ... HP LD4200tm - 42 LCD flat panel display with touch-screen - widescreen - 1080p FullHD - black - Smart Buy

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1334 seconds