Having problems with your Flat Panel Televisions ?

Screen comes on for 20 to 30 seconds then goes black. the power light is blue (on). when i hold the power button on tv it comes on again then goes off after 20 to 30 seconds. i have tried all the differant inputs, except for the pc input and i get the same results. i opened up the back of the set to see if it could be a bad cap but everything looks good,no burnt smell, nothing melted or poped, could this be a bad input board? This tv is not used much (less than 1000 hrs) it is clean and looks ju



Answers :

Repair Help & Product Troubleshooting for Flat Panel Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

Screen comes on for 20 to 30 seconds then goes black. the power light is blue (on). when i hold the power button on tv it comes on again then goes off after 20 to 30 seconds. i have tried all the differant inputs, except for the pc input and i get the same results. i opened up the back of the set to see if it could be a bad cap but everything looks good,no burnt smell, nothing melted or poped, could this be a bad input board? This tv is not used much (less than 1000 hrs) it is clean and looks ju


... RCA 32la30rq 32 Tv Black 720p Lcd - - RCA

I have a insignia 26inch lcd flat screen tvmodel number ns-ltdvd26-09 dvd combo and i turn it on with no other hookups just power cord ..and it powers up goes to blue dvd screen if i dont touch it it will stay on 20 60 seconds then powes off it does it every time ..and some times wont even come on ...and for the few seconds it does the screen is white with fat lines in it ...i look for a blinking diognostics light but have never seen it blink when tv is on stand bye the power light dont blink ..


... Insignia LCDTV26 26 in. Television

Hello, i have a samsung 42' plasma tv model #pn42c450b1d. the tv doesn't want to turn on. i plug it in and you hear a clicking noise se a red power light. also when you press the power button on the tv in the back u see a green light come on for a second on one of the circuit bords( the one under the power board) and simutanously you see a red light come on and and off at the same time on the circiut board with the av, hdmi, inputs. i looked and thier doesn't seem to be any bulging capaciters. a


Hi.As you know the TV is in protect mode because an internal fault has been detected. I think that you already tried leaving power cable disconnected for ten minutes. After connecting back restart the TV with no device attache ... Flat Panel Televisions

I have a Vizio XVT553SV that powers up but nothing on the screen. The Vizio logo flashes org to white for 1.5 minutes then the V comes on the screen for 1.5 minutes. It will repeat this over and over. I tried the factory reset and it didn't work. I have the back off and no capacitors etc look bad. I could check voltages but the are a lot of wires coming from the power supply and I do not have a schematic. Any suggestions ? Thanks


That problem sir is usually cause of faulty inverter board...Try to replaced inverter board to fix your TV.. ... Vizio XVT553SV 55 in. LCD TV

Sylvania ld320ss8a power up problem.It goes on stand by after 6 or 7 blinks of the green power on light and back to red 5-6 seconds There is no sign of bad capacitors on the inverter CBA.after unplugging power from inverter CBA to the power supply CBA what should the power read under normal conditions coming out of the inverter? I am getting a pulsating reading of 0-117 volts about every 2 seconds.Any advice as to the problem??


... Sylvania LC370SL8 37 in. LCD Television

55809 convergence Ok, so, I was having convergence problems with my 55809, and would concede to kick the side of it to bump the convergence back into alignment. Now the TV won't turn on period. The green power light comes on, but after a few seconds it goes out. I've been hitting the net hard on info, and it all seems to come down to a convergence problem with a couple of fuses and maybe some chips. Having said that, I looked up parts for repairing my TV and found a kit at tvrepairkits.com tha


... Mitsubishi WS-55809 55" Rear Projection Television

When you turn of the TV the POWER indicator flashes green for several minutes. The TV never comes on. After the several minutes of the POWER indicator flashing green, it stops, I hear a click and the light goes out. Within a few seconds, the LAMP indicator light starts flashing red continuously. I unplugged the TV and waited one hour to remove the lamp. I could not tell if the lamp was blown. I can see the filament, the glass is clear, but there is a 2 cm or less spot in the right upper c


Sounds like the lamp door is not secured in place. Try removing the lamp door and put in back in until it clicks. ... Panasonic PT-52LCX66 Projection Television

Power surge while tv turned off. tried several plugs tv will not come on. looked under back panel circuit board looks ok. could fuse on circuit board be bad.


Make sure tv is receiving power, then check the power board. ... JVC LT-47em59 47 in. TV

I have changed out the H.O.T. and the flyback on my R52WH74 model tv because it wouldnt come on and it would make a chirping noise I checked all the fuses and capacitors now with the new parts in the green power button light comes on for about 2 seconds and then goes off with a low pitch chirp it does this 3 times and then nothing i checked all fuses and capacitors again and found that 3 are not responding one is cp049, rp050 and cp050 could thiese be my problem or is it something else?


... RCA R52WH73 Projection Television

Hi I have a Philips 42PF5521 and recently when switching on clicks to come on and after say 3 seconds goes straight back off again , on disconnecting the power cord the flashing green light goes off then when I connect the power it goes onto standby and comes on or it did it gradually took more attempts to get it on and now clicks but won't come on at all!! Is this fixable?? New power board or am I wasting my time? I, ll have a go if I think it's fixable!


Ad capps on power supply use hair drier on panel or aim it in bk of telly bet it comes on ... Flat Panel Televisions

I have on element flx 2210 22inch lcd tv and when i power the tv to on the little blue light lites up for say 5 to 10 seconds then goes out and changes to amber without coming on and when looking down inside where the on off switch is you see a white flash as its turning back to amber can you tell me what needs to be replaced or how to repair this thank you for your help


As others have stated your problem is most likely caused by bad capacitors on the power supply board. This power supply board is the 200-000-xxxxtltx and is the same board used in the Polaroid TLA-01911 TVs. Here is a repair guide that shows what cap ... Element Electronics FLX-2210 22 in. LCD HDTV

I have an acoustic solution 32 inch HD TV. model number is LCD32805HD. power supply: AC 220-240V ~ 50Hz max:180W. The problem I'm having is. When I plug it in. The blue stand by light comes on, all appears fine. But then I go to start the tv up, it sounds like its booting up, but then I start to hear a clicking sound, the screen flashes to what appears to be a snowy screen. Then goes back to stand by. This all happens in the space of aprx 10 seconds. I have done some research and it looks like t


... Flat Panel Televisions

Phillips TV model number 60PL9200D/37 BELIEVE THAT THE LAMP IS BAD, WHEN I TURN THE TV ON PICTURE COMES AND 5 SECONDS LATER PICTURE GOES OUT BUT THE SOUND CONTINUES TO PLAY. THERE'S ALSO A RED LIGHT ON THE POWER BUTTON (LAMP LIGHTS UP). HELP?


... Philips 60PL9200D Projection Televisions

I have a Vizio VW32LHDTV10A that produces sound but no picture. I have checked the main power board for 24v to both backlight inverters and 24v is present. I then hooked up both backlight inverters and turned the TV on and the blue LED on the Slave inverter comes on, but goes off after only a few seconds. What further tests could I perform to check which part is defective or what component is the most likely cause?


When you reconnect the inverter boards, when the LED goes off on the inverter board, do you still see 24vdc? You shuld also ty hooking up test lamps to the 24vdc to see if it will stay on.\012Right now I have a feeling the problems are in the b ... Flat Panel Televisions

Lcd tv comes on 2-3 seconds then goes to standby


... SNK Magnavox 32MF338B27 32 in. LCD TV

I have a Olevia lt37hvs, When i plug it in the blue(olevia)light comes on then goes off and the screen will be blue for 5-6 second then go black for 1-2 seconds then screen goes blue again and it just keeps repeating this process. i hear the big transformer on the power supply clicking like its being overloaded then the screen goes black. When i disconnect the main board from the power supply the clicking and flashing stop. Any ideas?


Tried to connect again the supply for main board and disconnect the supply for the inverter board of back light. and turn on the tv, if the indicator stay the inventer board was the cause of voltage drop at the power supply board. ... Olevia LT37HVS 37 in. LCD HDTV

My Sanyo DP26648 is completely dead. If I turn it on, the power LED comes on for about 5 seconds then goes out. I can repeat this twice, and then the power LED won't even come on. Unplugging and then replugging the TV will once again allow the Power LED to come on for 3 cycles in attempting to turn on the TV. I guess replugging in the TV allows a capacitor to recharge and power the LED? Is this TV repairable or is it time to replace it?


... Sanyo DP26648 LCD TV

Have a lg 20ls7d 20 in.power problem .theres power to the tv.the red light in frontis in .i hit the power button on top green light comes on then blinks 5 times screen cums in or a second then goes off.so does the green light .but the power light in the front wont come back on unless i hit the power button on top again.like i was turning the unit off.any ideas?


... LG RE-20LA70 20 in. Analog TV LCD Television

My samsung 46 inch LCD also has the problem of no picture, but clear sound. I read all the posts about capacitor problems, and have gone so far as to take the back off and the power supply cover to look at the capacitors. But they all look flat...I don't see any of the bulging noted in other posts. When I first power up the TV, it looks like it is lighting up, but after maybe 1/2 second of buzzing, the dim light goes off completely. Looking at it from the back with the cover off, you can see the


Samsung has had a lot of capacitor issues with some models, even if the capacitors look good they can still be open and need to be tested with special equipment to get to the root of the problem. They had so man ... Samsung LN-T4665F 46 in. LCD Television

I have an AOC LCD tv when I hit the power button the light turns blue and then right back to orange, at first it would eventually come on after pressing the power button several dozen times and work fine until it was turned off, now it just goes from orange to blue and back to orange or the light goes out completely. I saw a video that said when it does that it could be the power supply or the main av board, what do you think?


Hi there , sound like it may need output caps replaced in the power supply . ... AOC L26W861 26 in. LCD TV

I have a LG 42PG6010 that will not let me change inputs, also when swithed on the green power light flashes 5 times before set comes on to digital tv. It will not change to Sky when box switched on and as stated I can not change through the AV input button although the graphic comes on screen allowing me to select AV1 (sky input) but on presing OK it freezes on screen, I then have to switch off and back on again. the other thing is it takes 20/25 seconds to switch off.


... LG 42PG60 42 in. HD-Ready Plasma TV

I have a 50 inch hLn5065w ,when i turn it on a very lous noise and vibration seem to be coming if your looking at the back of the tv its coming from the right side looking from the back.i know its not a fan thats right in front of that bulb looking thing because i unplugged that fan just to make sure it wasnt.but whatever it is seems to shut the tv off after 10 seconds of the noise and loud vibrating,do you have a clue what it could be?


I have a 50inch Samsung TV\015\012need color wheel for projector TV Samsung 50" Tantus model HLM 507w SVC model version\015\012Need part # and cost to replace damaged unit. Thanks for your prompt respons ... Samsung HLN5065W 50" Rear Projection HDTV-Ready Television

Vizio VT470M no picture, no sound, no backlight. Power supply board looks good all voltages appear correct (24V, 5V, and 3.7V) and no "bulged" capacitors . When I unplug unit for two hours, the screen comes on normally backlight comes back up and picture is normal, but changing the channel causes it to go dead again. Bringing up menu with remote is really sluggish and when attempting factory reset, it goes black. Vizio light on the front of the TV comes on and off when pressing power button,


Im having similar problem and with my limited knowledge of lcd tvs and the voltages ALL being good except the pwr on or sw on voltage from the main board to the power supply which tells it to switch everything on Im guessing that something is going w ... Vizio VT470M 47 in. TV

I have anew Sony 40 inch EX 520 series Led warranty not valid in India since purchased in Bangkok. The power standby light goes of very often and the Tv goes dead. If I switch off the power supply for couple of minutes and switch it on again the stand by light comes back on and TV functions normally. The TV is also very sensitive to voltage fluctuations and on Inverter power supply. Please let me know what could be wrong and how to solve this problem. Thanks


... Flat Panel Televisions

Toshiba 32C3500E Regza suffering for the old power issue BUT NOT the three yellow blinkis of the power LED - TV comes on after full power down - say 10 mins; starts ok, sound and picture ok, the the 'surge' noise, picture goes off, sound goes GREEN LED stays on - need a cold start again but less than 60 seconds same old prob. Know where I can get firmware as I would like to try this before calling bob-the-builder


... Flat Panel Televisions

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1631 seconds