Having problems with your Standard (CRT) Televisions ?

Our tv will not recognize the cable cord attached to it. We hooked another tv to it. The cord is not bad. We attempted to search for channels and it says there is no cable attached. Is there a button that needs to be pushed. I dont have the owners manual so I am not sure what to do? Is there a switch in the back? The people that owned this tv before ux had satelite. Please Help.



Answers :

Check in the menu under picture or video settings and see if there is options for the inputs. some tv's allow you to disable inputs for faster switching. if you only have a dvd player but your tv allows for 8 input devices, you're always having to press the button many times to go from tv mode, to dvd, and back. disabling inputs allows you to switch between only what you use.\015\012
\015\012press menu and navigate to the video settings. if you see "inputs" or "labels", select it and you can probably activate and deactivate inputs. my guess is the one you are trying to connect to isn't "on".\015\012
\015\012searching internet i really only found places that charge for the manual...here it's $10\015\012
\015\012http://www.manualzone.com/service-manuals/ProScan_PS27500_PS27500/users-owners-manuals/ReWrite-SPFM-LNG1.Dyn.M42617267KYWRDS_ProScan_PS27500_PS27500_service_manual_repair_manual_schematic_diagram_owners_manual_users_manual_parts_list.html#1\015\012
\015\012hope this helps

Repair Help & Product Troubleshooting for Standard (CRT) Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

Our tv will not recognize the cable cord attached to it. We hooked another tv to it. The cord is not bad. We attempted to search for channels and it says there is no cable attached. Is there a button that needs to be pushed. I dont have the owners manual so I am not sure what to do? Is there a switch in the back? The people that owned this tv before ux had satelite. Please Help.


Check in the menu under picture or video settings and see if there is options for the inputs. some tv's allow you to disable inputs for faster switching. if you only have a dvd player but your tv allows for 8 input devices, you're always having to pr ... Proscan PS27500 27" TV

No Signal Watched a DVD, when we switched back to watch TV there was no picture and it said no signal. I tried another TV to make sure the problem was not the antenea or the cable. All checked out fine. It did this once before and we found all the stations were one point off, for example 10.1 was now 10.2. We manually restored all stations and all has been well until now. I have tried many things and I can not get a picture back. In diagnostics it says my signal strength is zero. Thank you, Greg


Have you checked on all inputs including the rear audio and video jacks? ... Sony KDF-50E2000 50" HDTV

We bought a new LG 32LD460 tv this morning. It switched on fine and we had it running with good picture and all. Then we left it for a while and came back to try and set up the xbox. It switched on with the xbox with the standard av cables but we realised we had an hdmi cable for the xbox. So we unplugged the others and then plugged the hdmi cable into the tv. Lo and behold the tv would not switch back on. We then unplugged the xbox and just kept the power cable of the tv plugged into the tv and


It sounds like a powere supply problem. You will need to take the back off and test the voltages that are printed on the power pcb with a digital multimeter. Need to check the power button light, if it is on then you have the 5VDC standby power and t ... LG 32LD450 32 In. LCD HDTV

I have a DYNEX TV, Model DX-40L 150A11 (LCD TV). I push the button turn the tv off. When I came back later to watch tv I tried to turned it ON nothing happen. I made sure the tv was plugged in and the cord was attached. Still nothing happen. The power signal light was not on either. What could be the problem? PLEASE HELP.


... Flat Panel Televisions

I am having problems getting cable on my TV. The cable man told me on the phone to change it to either #4 on the back of my cable , and then the cable will work. The problem I have is when I look into the back of my Shart Flat TV I could not find where I am suppose to switch to #4. Right now I cannot get cable on my Sharp Flat TV. Can you help with this, getting the cable working on my TV?? Where can I find this switch #3 or #4 behind my TV Monitor? Sharp Liquid Crystal Flat TV digital Mode


Like i said in ur other post u have to find the input or source buttons on ur remote. Also fyi it's never a good idea to post ur phone number on the internet. ... Flat Panel Televisions

My LG 55" LV9500 loses sound when switching from a standard def (480p) channel to a high def (720p or 1080p) channel. Then if I switch it back to SD the sound will come back. Yet EVERY time I want to watch a channel in HD I have to either turn my tv off and on again or go into my output resolution settings and uncheck 720p/1080p then recheck it again (even though it's already set to automatic). Is it the hdmi cable? The tv? The cable box? Any help would be greatly appreciated as it's driving me


... Flat Panel Televisions

Hello. I have a LG 47lg50-ua that when turned on, the right half of the screen goes white. The left half still plays fine. The warrenty had just expired so. I took the back of the tv off and looked around. I noticed that the top left ribbon cable (looking at the TV from the back) attached to the T-Con board (a CMO 35-D020223) had puffed up a bit. I took the bad ribbon cable out and put the good ribbon cable on the bad side. After the TV was turned on, the right side of the TV stayed white and wo


If you changed the Ribbon cable and its still the same then the T-Con board would of probably gone faulty. Lots of weird screen problems can be accounted for the T-con board. ... Flat Panel Televisions

I unplugged my cable from the back of my tv to try and hook up and Xbox... Well when I plugged the cable cord back in to the television i got a blurry white and black screen


Do you have a game mode on your tv if so push the button ... Flat Panel Televisions

Not sure what happened my tv had sound and then it just went away. I have Dishnetwork cable but other tvs in the house are working fine. I made sure all connections were good. Turned off tv and turned it back, same with cable transmittor.


... Toshiba Flat Panel Televisions

My 32 inch phillips lcd tv thats about 6 years old. Last week the menu screen popped up and can't get out of it. I have tried taking power cord off and waited 8 hours. When i plugged it back in the menu screen went away for about 5 minutes then it started back up again. I checked to make sure menu button isnt stuck and took batteries out of remote to make sure it wasnt that but still keeps happening. How can i fix the problem?


... Flat Panel Televisions

My flat panel tv will not recognize the co-axal cable wire thats pluged into the back of it. Ive chose the all channel search and the digital channel search and neither of them seem to work. The tv always switches back to channel 50 which is NOT an active cable channel in my area. Also when I press channel up or down it only changes the input for the tv. Wht can I do to overcome this issue?


There isn't a tv signal on that coaxial cable. The other end of it is not connected to anything with an active signal. For example an indoor antenna, or an outdoor antenna, a cable TV company's active TV source (that you are payin for), or a satallit ... Sanyo Flat Panel Televisions

I have a 27N-S100 TV. It was given to me with no remote. The Cable plug thing in the back is completely broken off, but I was told the TV could work perfectly by using the 3 colored cables (I believe they are called A/V cables: yellow, red and white?) and going through a VCR. I have tried endlessly to hook these cables up with my VCR and I am getting nowhere. Not having the remote, I downloaded the owners manual and read through it and it showed how to access the menu through the two channel bu


What you're trying to do shouldn't work unless the VCR has a digital tuner in it or your cable company still hasn't converted over to digital as of yet. You will need to get a digital cable box from your cable company.Connect the av cabl ... Sharp 27N-S100 27" TV

Hi-rn Thank you for being here- We were watching our Sharp Flat Screened TV, beautiful nice picture. We noticed when we hooked the cable up for Direct TV in our new home, the input connection point was bent and slightly loose. We attached the cable and everything seemed fine. Tried to move it back to the wall and the picture became distored w/ snow and it's saying 'analog' on the screen. Is there another way to connect it to the cable other than that particular connection point until we ca


With Direct TV, you should use the video input (composite video- yellow/picture, red/right stereo, white/left stereo)ORcomponent video- (green/video, blue/video,red/video white/left channel stereo, red/right channel stereo)t ... Sharp Flat Panel Televisions

I bought an wuria eq5588 , got it home and hooked it up to my cable , did the channel scan , when it was finished it did not have all the channels my other tvs get . The pictures are distorted on most of the channels . I've rescanned and it is the same . Do I need any other cable cord that I don't have. I don't subscribe to HD with my cable company, but surely that should not make a difference.


It actually sounds like you may have simply misthreaded the cable, or it's just not tight enough.The other possibility is to check the input type in the OSD (on screen display) menu, and make sure it's not set for ANTENNA rather than CABL ... Flat Panel Televisions

The tv turns on but will not show picture or sound screen goes black then back to blue. im using a reg cable cord from cable box, going to try and use the red yellow amd white cables next... hope it works


Try a DVD player etc connected to one of the rear audio and video inputs first to see if set is functional that way. ... Flat Panel Televisions

What channel do i put my tv on to watch cable, I attached cable cord to watch tv, but the screen says, no channels found. trying to scan channels but nothing is working. How do I get channels and watch tv? I'm connecting only the cable wired.


... Westinghouse SK-26H240S Television

I replaced my bulb & it still blinking& the bulb will not light. And I made sure the switch in the back was up! Help,!


Check to make sure it is getting voltage from the ballast and if as I suspect has a color wheel that it is intact--remove lamp and look at it. ... Projection Televisions

Technika lcd40-920 My tv has switched its self off and wont switch back on again although the standby button is still on (was flashing but now on with no flashing) ive tryed turing it on with the remote and using the touch buttons on the side and turning the mains off for 10mins to see if it resets or something but still nothing. Please help. I really dont want to have to buy ANOTHER TV! GRR! Ive done my research and what ive seen is people saying its the board with the hdmi etc and theres no po


Thissounds like a very common issue.If set is hard to turn on (takes several tries)but will eventually turn on hereis what my guess would be.Every set has a standby p ... Flat Panel Televisions

Hi i got a vhs/ dvd recorder from a friend who upgraded,but dont have a manual,i have set it up to my portable tv upstairs,which has a set top box,but dont really know if i have the cables right. the problem is i can watch the videos but cannot record them to dvd,when watching them the dvd button does not record,but when you switch to dvd the record button works, im sure i have the cables in wrong. please can you help me audrey


Hello Audrey,\015\012\015\012If you can watch the videos on the TV, your cables are correct, but you don't generally record a video to DVD using the record button. Most VCR/DVD combinations have a DUBBING button on the front of the ... Flat Panel Televisions

I have a Dynex Bluray Player and when I connect it with AV Cable it shows Dynex DVD Bluray Player Details and works then once I place a dvd inside play it and after a while stop it, it then switches off and when I power back on it powers button light up blue but no picture on TV..Is it the AV Cable or the Player? And the Player is in New Condition with Remote and Manual!


... Dynex 32 in. LCD Flat-Panel HDTV

The 'out' cable got ripped off of the receiver box :(. The cable came completely out, leaving the metal adapter end cap attached to the receiver. Can I resplice this back together myself?


Throw the old screw end away, it will only provide you with more headaches if you use it.\015\012Buy some coaxial connections from the store for about 3 bucks.....you cant get the wrong thing if you just bring the old end and match them up.\015\012 ... Flat Panel Televisions

I just want to ask how to connect a cable tv connection to the jvc AV-21QX18. the antenna/cable port at the back is different.. what do i need to attach a cable tv? do i need a port or adapter or something? thanks


... Flat Panel Televisions

The other night I inserted a DVD and it played beautifully. When I switched back to watch cable TV, the screen had a red tint. I've tried unplugging the screen and checked the video cables. Still red. The other TVs in the house are not having this issue.


The problem sounds like it is with the Light Engine, I would contact Customer Support for help, possible repairs. Thank you for using FixYa! ... Flat Panel Televisions

TV picture is breaking up. Used to work perfectly. Sometimes the fault clears when we switch on the attached DVD recorder. Then the update stations option shows on screen. No matter if we choose yes or no for the update, the picture then goes back to unwatchable. The loft aerial has a booster attached. I have checked all connections and all seem fine including the booster. It is the fact that the TV used to work OK but something must have changed to make this happen. None of our neighbours are e


... Panasonic TX-32LXD70 32 in. HD-Ready LCD TV

I have a LG37LF65 LCD TV. Several month ago it broke down, at that time power supply was repaired. After a while after switching it on picture started to shake and then totally disintegrated. I have taken it back to service they said this is main board failure but since I cannot find proper board. Is It sure that is main board fault or can it be anyithing else? Can I check anything to be sure?


Check the power supply voltages to make sure you don't have another capacitor going out (the first one replaced is probably OK). Poor filtering on a supply voltage could cause the main board to misbehave. If the voltages are good, the shop tech is ve ... Flat Panel Televisions

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0988 seconds