Having problems with your Flat Panel Televisions ?

Proscan tv i got the tv on a channel i cant get off of and also the remote dont work. i need the tv back on tv and instead its on hdm12 and cant get off it. i have tryed all the bottons on the side of the tv and no luck so now i have nothing



Answers :

It sounds that the main system control section circuit have the fault. Contact any technician.

Repair Help & Product Troubleshooting for Flat Panel Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

Proscan tv i got the tv on a channel i cant get off of and also the remote dont work. i need the tv back on tv and instead its on hdm12 and cant get off it. i have tryed all the bottons on the side of the tv and no luck so now i have nothing


It sounds that the main system control section circuit have the fault. Contact any technician. ... Proscan Flat Panel Televisions

We got a replacement remote control for our ECW TV/VCR. The previous remote stopped working. We tried everything with it but no luck. Our hope was that the replacement remote would give us this function back again. Batteries are in....nothing happens. Do we just return this remote ang try to get by with just manual controls. We have no menu so for recording we are stuck on SP. Where do we go from here.?


... Emerson EWC1901 Combo

I have a pioneer elite television. The red standby light is on, everytime I push power button it goes off. Cant get the blue light on for the tv to work. Think its stuck on standby mode. tried unplugging but did nothing.


In most cases the standby light might blink with different rapidity to indicate a fault relevant to the processor. It is possible that most of these indicate that there are errors in the processing section . Since there is a possible short o ... Flat Panel Televisions

I cant get cable working on my JVC AV 2750S ive tried looking at the manual and nothing comes up its stuck at some blue screen.


Set your input to cable. prob using the remote. ... Standard (CRT) Televisions

Having problems with my 42lg7000.Its turned on and wont turn off the screens just black and flickers every so often and no sound.The remotes working but nothings coming up on the screen so cant get on input or anything tried using the buttons on the tv itself but thats not working either.


... LG 42LG7000 42 in. HDTV LCD TV

How can i tune my tv in to recieve freeview channels?? tried everything with no luck. cant even get analogue channels? i know this isnt a problem with the aerial as other tvs work!!


In the US, you are not able to obtain free HD channels without a tuner and an antenna. Some HDTV's have built in tuners and depending on your location to the broadcasts, you may be able to obtain reception. It is possible that one of your TVs has a ... Flat Panel Televisions

Hi, I have a Sanyo tv. Turned it on this morning and have no sound! I have sky and a PS3 but cannot get sound from iether! I can get sound from the PS3 using my headphones! I've tried as many different things as I can find online to fix the problem but cannot get the sound back... I've turned everything on then unplugged the sky box for 5 minutes and plugged it back in-nothing I've tried resetting all audio options-nothing I cannot rest the tv as a unit as I am using an universal remote . Can a


Have you checked its speakers? If not, check them. If they are found OK, then there should be some fault to its audio output circuit. Check and replace damaged component/s, or, change it a card bassis. ... Flat Panel Televisions

My JVC model. my JVC TV LT 42 EM 59 will not come on .I get no blinking blue light no power no nothing I get nothing I've tried to reset it in nothing


With no power it will not reset---if total dead unit you would have to first follow the power cord into the set to the line fuse it goes almost directly to---check the fuse first and examine the power supply board for damage or puffed up filter caps. ... Flat Panel Televisions

Screen I cannot get the closed-captions to work. They were working but now I get nothing. I've tried all the different captioning options to no avail. I tried to power cycle it as well, also no use. Not sure what else to try.


... Sharp LC-32AV22U 32 in. LCD TV

I have a Panasonic 32 inch HDTV. TV worked great until one day tried to turn on and nothing. It acts like it has no electrical power. We have tried plugging into different outlets with no luck. The red light does not come up with pressing power. Tried remote as well, nothing. Any ideas?


One simple solution may be to replace the power cable or the power strip that the TV is plugged in to. If you cannot get any power to the TV even after this step, it is most likely a motherboard or some sort of circuitry issue. Make sure you are usin ... Panasonic Flat Panel Televisions

Mitsubishi WD-73735 will not turn on and there are no lights on front. The power supply was replaced, and is brand new. I fix HDTVs, and have had very little problem resolving other issues with other TVs. This one is strange. Need help, please. When I plug it in, you can hear the PS get power, but nothing turns on. Tried the 'Menu' and 'Input' combination....nothing. Tried plugging it in, with the 'Menu' button pushed...nothing. I can hit the 'Reset' button on the


If you have no lights come on the front of TV, you definitely have a power supply issue. Don't know what previous servicer did, but I would be looking at ALL wires & connectors. ... Mitsubishi WD-73735 Television

Our LCD display is black with no picture, but we have audio. I was told that the backlighting has gone defective. Can I get a repair manual and specific part and try to repair the TV myself? I figure it is worth a try and have nothing to loose. Worse case senario we will have to get a new TV.


Iv seen this before. you have a master and slave backlight inverter, one on the left and one on the right both with a metal cover over them. remove the metal cover from the on on the left. check the capaicitors for any bulging or leakage and replace ... Vizio SV470XVT 47 in. LCD TV

Hi I bought a urc-7557 but cant get it to work on my grundig freesat box, i have tried the 2 codes and the scan but cant get it to work. thanks.


... Flat Panel Televisions

I have a Sony Bravia KDL-40S4100. I turn it on and I can hear the solenoid click, the green light is on and I get a faint blue illumination. I do not get a picture or sound... or any response from the remote except for on/off. I tried unplugging it until I heard a click (I assume all the caps were discharged at this time) and tried again, still nothing but a green light and faint illumination. Any idea what I am dealing with... besides frustration?


YOU HAVE A BAD INVERTER YOU NEED TO CHECK TO SEE IF THERE IS 30 VOLTS ACROSS THE INVERTER ALSO CHECK TO SEE THAT ALL THE FUSE ARE NOT BLOWN ANOTHER ISSUE WITH THESE TV IS THE LCD ITSELF BUT 9 OUT OF 10 ITS THE INVERTER OR THE POWER SUPPLY PLEASE ... Sony BRAVIA KDL52XBR2 Television

Im trying to set up my pc on a samsung LE26R87BD TV cant seem to get a picture


... Flat Panel Televisions

I cant remove the earphone symbol from the top of my screen and it is affecting calls in and out and when i try to play music without headphones it is silent. This is driving me nuts, can you help please?? I have tried switching off and back on and removing the battery and the sim card to no avail and i have also tried numerous times plugging and unplugging the earphones but still nothing. my handset is the LGkf757 (orange provider)


... LG Flat Panel Televisions

I have a Panasonic Hone Theatre SA-BT 737 and. Panasonic Plasma TH-P50V20A. When I try and get surround sound out of TV channels with Blue Ray turned on the TV sound stops. The manual says you should be able to get surround sound through Tv as well! Harvey Norman told me I would need an Audial Cable which I bought . But still no Luck. Could you tell me what I need to do as getting very frustrated. Jim


... Flat Panel Televisions

I do not have cable or anything. I need to know what I need to get to get my local channels on my Vizio flat screen. I tried hooking up an antenna but I do a scan and get nothing. I dont know hat to do, Im tired of watching netflix.


... Vizio M220VA 22 in. LCD HDTV

My Durabrand dwt1304 was hooked up to cable. I now have relocated the TV into my workshop and am attempting to hook it up to a digital converter and an antenna. Turning the TV on, I am getting a "Helpful Hints" message on the screen that asks if I have performed an "AUTO PRESET CH". I found this on the remote's menu and ran it, after which the screen gets the message, "NO TV SIGNALS". At that point, I can get the TV to do nothing else. Trying to run through setup with the digital converter


I suggest to go back to the menu and make sure in the connection or signal type to select antenna.. Since you had it hooked up to cable it may not have been selected to go back to antenna. Hope this helps you out. ... Durabrand DWT1304 13" TV

I have a 47 lg lcd tv bought in 09. When i use hdmi for xbox 360 i get picture and sound but with ps3 no pic no sound. I just bought a sony bluray and get pic but no sound. I bought a lg bluray and get no pic no sound. I have tried 2 or 3 different types of hdmi cables but nothing so far has given me sound and picture...help please.


... LG 47LF11 LCD TV

I have an older Mitsubishi TV, model VS-50605, that has been giving me problems. I am not able to consistently get a picture and/or sound through cable. All my other inputs work properly. I can play my Xbox on it and my DVD player works fine. Every now and then I get sound but no picture. On the rare occassion I get a picture through cable, it only lasts about 15 minutes at the most and then it cuts off. I've tried switching between ANT-A and ANT-B but had no luck resolving the issue. Any sugges


U have a pay boxes from those Telicoms,cables or satalites compannies?Yes,tries unplug,replug those boxes back about an hour later for it softwares to updates it softwares,should solved this problems or if not trade it in for a new box. ... Mitsubishi VS-50605 50" Rear Projection Television

The picture mode on my tv is stuck to wide. When I try accessing this feature through the remote's "p-mode" or "p-size" buttons it gives me an message on the screen that says "not available." I've also tried accessing this feature through the menu on the remote and on the side of the tv but I still keep getting this same error message. I tried reading through the manuel, but there is nothing under the troubleshooting area that helps or addresses this issue. Is there a way to reset the tv t


If it says "not available" then you have to try the settings of the input source such as a cable box or something. Chnage the aspect ratio to 16:9 . If you can get me the model number of the box I will see if I can get your precise instructions. ... Flat Panel Televisions

I have recently bought a sharp aquos lc 40 le811e tv set,im havin problems tuning it i have a new antenna installed and when i try and auto tune it says there is no signal,i have also tried 2 differant types of portable antenna made for digital tv and still nothin works,cos of this i have to continue using my digi box although the tv has built in freeview,also cos of this i cant use most of the features on the tv set,i have tried so many times to tune it but still nothing works,could u tell me w


Does it have a built in digital tuner? unplug wait 5 minutes hold power button while you plug it in you should get into a secret menu usd by techs look and see if you have a digital tuner hope that way works for that set ... Sharp Flat Panel Televisions

Hi I have a Mitsubishi HDTV 1080 Integrated and when I try to turn it on I get nothing except a green timer button that flashes. I have tried unplugging then plugging back in with no results I have also tried pushing the reset button also with no results, do you think you may know what the problem may be?


Trinz73,\012\012You did not mention the model number. If your unit begins with WS-xxxxx see my tip at http://www.fixya.com/support/r7065 ... Projection Televisions

I have just got my smart tv and tried to download LBC app app there but nothing happens when I try to get into it


... Samsung Flat Panel Televisions

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1028 seconds