Having problems with your Projection Televisions ?

I replaced the inverter panel on my 40" proscan tv but still have no picture and no backlight


\015 I found there was a very significantly sized burn spot on the inverter panel and replaced it with no success after investigateing the tcon i found a small chip in one of the resistors (perhaps it was a copassitor?) power supply seems to be fine and there are a few hazy spots on the main board, by that i mean im not sure if they are burnt curcuits/solders one thing im almost certain is the c10 and c15 have a number of sockets in wich only one is very discollored and to me appears they are burnt how exactly can i tell if this really is the case? also how can i eliminate wich parts i will not need i already put in a brand new backlight inverter and dont wanna continue wasting money on the tv. buying a new one is not an option right now and the tv is only two years old, how can i tell if i will not need a new power supply or if i will not need a tcon or if i will not need a new cord or even main board? please help i am desperate.\015

Answers :

Repair Help & Product Troubleshooting for Projection Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

I replaced the inverter panel on my 40" proscan tv but still have no picture and no backlight


... Proscan 40LD45Q Full HD 40 LCD TV

I have a RCA l32hd35d version A I can turn it on and it comes on and the backlight goes back out. The rest of the tv works and it has a picture if you look at it close. Just no back light. I have replaced the inverter and the problem is still the same. The blon pin on the inverter has 3 volts on it even after the backlight goes out The 24 volts is still there too you can keep turning it on and off and the backlight will stay on. any help will be great...


If you have 24vdc feeding the inverter board, the next signal you need to find is the BL_ON SIGNAL which will turn on the inverter board, it should be 3.3vdc or 5vdc on that pin (pin 12 on CN1 of the inverter board), see picture here:\015\012 ... RCA L32HD35D 31.5 in. LCD HDTV

I have a vizio vz37l tv. When i turn it on the screen lights up, however there is no picture on the screen. the sound works, its just no picture on the screen. I read on a couple of the posts on here, and figured the proper course would be to replace the t-con board. I just finished replacing the tcon board and still the same thing. I called vizio about the problem and they say that if the screen lights up then the problem wouldn't be the backlight inverter boards, that it might be as simpl


Its the main board... ... Vizio VX37L Television

I have a Toshiba Regza 42HL67US, it turns on and baclights come on for a second then shut off, still have sound no picture, bought inverter boards (master and slave) but still does it. What else runs the backlights??? Don't want to keep replacing boards till I get it fixed.


... Flat Panel Televisions

No picture, good sound...replaced both main inverter and slave inverter and still no picture.


... Flat Panel Televisions

My samsung tv replace the power supply board. got sound no pictuer replace the backlight inverter stell no picture


You have to check whether the back-light inverter gets its proper voltages to function. There as many voltages that controls the back-light inverter. Check these is a skilled work. Contact any experienced service technician. If you are not ... Samsung LN40A650A LCD TV

I have a Sharp LC42D62u that has sound but not picture. I have done the flashlight test and can see images. I replaced the both master and slave backlight invertor boards, but still no picture.


... Sharp Aquos LC-42D62U 42 in. LCD HDTV

HI, I HAVE SOUND ON THIS SET BUT NO PICTURE. THE SCREEN IS COMPLETLY BLACK. I LOOKED DOWN THE BACK OF THE TV AND THERE IS NO LIGHTS. BUT THE VIZIO FRONT PANEL LIGHT POWER ON . I BELIVE IT MIGHT BE THE INVERTER BOARD IS BAD ON SOME PARTS ON IT. SOULD I REPLACE THE WHOLE BOARD OR FIND AND REPLACE BAD PARTS. THANKS.


Hi try and see if you can replace the whole thing and git a new one ... Vizio VO320E LCD TV

I have a Sharp LC42D62u that has sound but not picture. I have done the flashlight test and can see images. I replaced the both master and slave backlight invertor boards, but still no picture. There are capacitors very close to the connection site from psb to invertor board. Could these be the problem? Any suggestion?


You take a gamble when just guess--main board turns things off and on and controls the screen ... Sharp Aquos LC-42D62U 42 in. LCD HDTV

Samsung model un40eh6000fxza has had all parts replaced including the front panel and we still cannot turn the tv on. There is a 6-8 second lag before the tv reacts but no picture or sound


... Samsung UN40EH6000 - 40" Class 40" viewable 6000 - UN40EH6000FXZA

My TV turns on shows picture but shortly later cuts off. During the time while its on I can change channel, inputs but I get no sound. I took panel apart and found a blown bulb. I changed the bulb and still the same issue. First I was getting 13 blinks and after replacing 1 bad bulb it only gives me 8 blinks. Please help me solve this issue and fix my TV.


Please tell me whats the make and model of the tv so that I can tell you what the 8 blinks error code means ... Flat Panel Televisions

Is the video processor board the same thing as the tcon board on a sony lc42d62u? Have sound, no picture. I have replaced backlight inverter boards & main board. Could it be the tcon board?


Yes it could be a t-con board but could also be a 12V power supply output failure. The Video processing board, and LCD panel uses 12V ... Flat Panel Televisions

My RCA Scenium blew it's lamp. When i replaced the lamp there is still no picture (black screen)and panel lights will blink 5 times. Could this be my color wheel?


It could be the colorwheel but if you dont hear any whinning before the light starts blinking 5 times its probaly the AC in board especially if you have the ATC336 chassis RCA ... RCA Projection Televisions

Samsung LA32A330J1N - have two of these that are only showing part picture (one half screen the other quarter screen) have tried replacing both Video board and PSU and still get the same fault - ideas ( I think it may be the panel itself)


... Flat Panel Televisions

I have a samsung- LNS4692dx I have no picture but I have sound and backlights. I have replaced the tcon board but still nothing anyone have any advice?


All these sets are like this---take a guess and replace----one of two things always happens : either it gets fixed or you replace all boards and still same problem= bad display panel is possible. ... Samsung Flat Panel Televisions

I have a Sony KDL-46S4100 LCD that was given to me that doesn't work. It powers on and the power LED is green and the backlight to the tv works and stays on as well but I get no picture or on screen display such as the menu. I can hear sound from the speakers when the input is set to the correct one. I purchased a replacement T-CON board but the problem persists. If I do the LVDS cable wiggle test I can see noise come up on the panel. It varies from vertical lines of different colors to whe


... Sony KDL-46S4100 46 in. LCD TV

Hi, can you help me with this TV please. Hi, I have a Olevia 232-T11 LCD TV. First my TV wouldn't turn and the blue light just stayed on. I replaced the power supply board and now my TV turns on and the screen lights up but I get no picture or sound. The slave backlight inverter board has a blue light when you turn the TV on but goes away shortly after. The screen stays on but I have no sound or can't control the channel, volume or source button. Please help.


If the tv is not coming on but there is no picture or sound then it is a 100% guarantee that its a problem with the audio/video main board of the tv. I am sure that replacing the same would resolve the problem. Please get me the part number that is p ... Flat Panel Televisions

Coby TF-DVD1972 has a very dim picture. I replaced the inverter board already and it didn't change anything.


... Flat Panel Televisions

HELP! Olevia lt37hvs screen went blank. No Sound, panel buttons wont work. Backlight is only on on half of screen.


If you had audio i wold say its most likely the Tconn or its upper two connections to the Panel itself. But since you dont have any sound either I would assume its either the LVDS cable from the main board to the Tconn or the Main board itself as aud ... Olevia LT37HVS 37 in. LCD HDTV

Replace the power supply and the backlight inverter to my samsung has sound but no pictuer can u help


Check whether CCFL lamps are good or not. Check whether the newly replaced back-light inverter functions well. ... Samsung LN-T4665F 46 in. LCD Television

I have an ELCHS321. My backlight started to flicker. The inverter board is JLS-05-32EI. I have the back open and noticed that the LED on the inverter board was blue and flickering as well. As the set warms up the LED turns white but still flickers. The LED goes solid white and the flickering stops. Is this caused by the inverter board or or the backlight. Is there anyway to load the inverter board output to isolate th problem.


I would suspect and check first the voltages going there to see if low when cold and come up and if they are moving up and down when it flickers----points to problem in power supply ... Element ELC-HS321 32 in. LCD TV

Replaced the lamp in my Optoma Rd50 and the screen still reads that I need to replace lamp also T.v still having the same picture problem as before replacement lamp? what else could be wrong?


... Optoma RD50 Television

I have a Vizio VW32LHDTV10A that produces sound but no picture. I have checked the main power board for 24v to both backlight inverters and 24v is present. I then hooked up both backlight inverters and turned the TV on and the blue LED on the Slave inverter comes on, but goes off after only a few seconds. What further tests could I perform to check which part is defective or what component is the most likely cause?


When you reconnect the inverter boards, when the LED goes off on the inverter board, do you still see 24vdc? You shuld also ty hooking up test lamps to the 24vdc to see if it will stay on.\012Right now I have a feeling the problems are in the b ... Flat Panel Televisions

I have a Vizio VF550M problem. I was watching a show and the picture faded to black. The audio was still playing but no picture. I turned the TV off and on again but I still have no picture. It used to flicker a couple of times but now it doesn't. I can see the backlight come on when I power it up. Any ideas what could be causing it? Thanks in advance


... Vizio VF550M 55 in. LCD HDTV

Thomson 50DSZ644. Just replaced the Lamp great picture but burned smell.. after few house it smelled verry bad..and i turned off. now when i turn on the tv the picture in middle is dark and still thi


Should have unplugged it when you noticed the smell.UNPLUG and remove and look at lamp you installed--is something in the housing where lamp goes melted? I hope you did not touch the face of the bulb with your hand or fingers.What ev ... Thomson 50DSZ644 50" DLP Rear Projection TV

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.4601 seconds