Having problems with your Projection Televisions ?

Wiring diagram this 12 V DC fridge is not working correctly, the problem is this: when you switch to cool all the green led's come on, however it will not cool, also when you switch to warm, the first red led comes on, however only for about 1 minute. I have checked the unit in center between the aluminium fins and i get cool, also warm when i connect to 12 V DC.on the PCB it has the following KNL-316 Kernel also VER.2.0 04/2/24. so if possible i need a wiring diagram. have replaced the 2 Bridg



Answers :

Repair Help & Product Troubleshooting for Projection Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

Wiring diagram this 12 V DC fridge is not working correctly, the problem is this: when you switch to cool all the green led's come on, however it will not cool, also when you switch to warm, the first red led comes on, however only for about 1 minute. I have checked the unit in center between the aluminium fins and i get cool, also warm when i connect to 12 V DC.on the PCB it has the following KNL-316 Kernel also VER.2.0 04/2/24. so if possible i need a wiring diagram. have replaced the 2 Bridg


... Projection Televisions

Hello, I have the bluesky lcd tv with code BS3705HI. We recently moved and thereby also moved the tv. Now we have small picturemode, so we changed it in the settings. However everytime we change channels the picturemode switches back to small size. Also when we turn the tv on and of. We tried the lock function but it doesn't work. Someone please help!


... Flat Panel Televisions

40 inch ktv model ltw40eh1b. When plugged in the light the blue light will come on but when I hit the power button I hear a multi note tone and nothing else will happen. I can unplug it and can go through the process but same result. I have heard that it may be the media board and also have heard that it may be the power supply. Tthe thing is I cannot find a wiring diagram or also where I may be able to purchase these items. Any help would be greatly appreciated. Thanks


... Flat Panel Televisions

My Olevia LT26HVX has suddenly lost color control. It has been set with color temperature on Middle for all the time I have used the set. Yesterday when I turned the unit on, the picture is hot pink or magenta with little blue and no green. If I set the temperature to Cool, the color switches to mostly lime green with solid blue areas appearing as black. If I set the temperature to Warm, the screen picks up more blue but has an overall muted green cast with no red. If I select "user" for color


... Olevia LT26HVX 26 in. LCD Television

My sanyo 50 takes time to warm up then i turn it off ind on again it shows pic i figure its the power supply or ignighter switch cause it shouldnt be out of gas in just 4 yrs i think its a sealed system also my question is how to replace myself and is there any soldering required


There's a good chance you have failing electrolytic capacitors either in the power section or the inverter section or both.Any caps in these sections that look bulged at the top, or bulged/leaking at the bottom need to be replaced.If you ... Sanyo DP50747 50 in. Plasma TV

SAMSUNG PN50B860 switches inputs by itself, and will also change volume by itself, and IR sensor flashes after set warms up. Tried replacing the IR sensor board...but the problem remains. Any ideas?


I had the same issue. I ended up replacing the main board. Part number BN-94-02821B ... Samsung PN50B860 Plasma TV

I have bought a ubiquitous 580 via the prubuy website. However when I install the power plug and switch it on, there is no power indicated on the front panel. Does this also relates to the analog cables which I have to connect to the TVs and zvox? I need the reply urgently as I can return the soundbar within 7 days. Thanks.


... Flat Panel Televisions

Need wiring diagram for afb1212 toshiba tv cooling fan


... Toshiba 52HM95 52" HDTV Projection Television

This unit is practically brand new, has no dust nor dings nor damage on the unit anywhere, not even a scratch, but I haven't been able to get the unit to power on. Power cord is connected. The switch on the unit sounds like the others when pressed and everything looks and smells good inside and out! There are no cracks on the circuit boards, no broken wiring no broken or missing or out of place connectors. The fuse is also intact and appears good, but I haven't used a meter yet to check for


Hi jesseley,\015\012\015\012Do it has a led light when you plug the unit to the outlet, make sure that the outlet is live, what happen when you pressed the power on switch in the front panel?\015\012\015\012Jdvillanueva ... Flat Panel Televisions

My flat panel tv will not recognize the co-axal cable wire thats pluged into the back of it. Ive chose the all channel search and the digital channel search and neither of them seem to work. The tv always switches back to channel 50 which is NOT an active cable channel in my area. Also when I press channel up or down it only changes the input for the tv. Wht can I do to overcome this issue?


There isn't a tv signal on that coaxial cable. The other end of it is not connected to anything with an active signal. For example an indoor antenna, or an outdoor antenna, a cable TV company's active TV source (that you are payin for), or a satallit ... Sanyo Flat Panel Televisions

Samsung DLP Lamp Panel Safety Switch Wires - PLEASE HELP


... Samsung HL-S5086W 50" HDTV

Philips LED 40PFL9704. Switches off before completing the warming up stage.


Sounds like shipping damage---maybe the display panel got damaged. ... Philips Flat Panel Televisions

Philips 37PFL5603D/10 tv, connected to Humax HDR-Fox T2 recorder. We do not have the HD signal yet, but due in June this year. Problem is with the HDMI connection, mostly does not work, sometimes green picture, no sound. Also does not switch automaticaly When box is switched on or off. Will only switch properly when a scart lead is also connected. You should not have to use a scart, when you have HDMI. We need the HDMI to cope with the new digital signal when it comes. Have switched Humax


... Philips Flat Panel Televisions

Diagram for cooling fans that controls the lamp on a Hitachi TV


I have not seen this model Hitachi but I have never seen one with 2 fans for the lamp---in all cases there is usually only one-Hitachi only offers service manuals online and only to authorized repair shops with a user name and password. If ... Hitachi 50VS810 50" Rear Projection HDTV

Wiring diagram need to get free wiring diagram so i can plug all wires back where they go ?


Easy... take a marker pen as u unplug number each plug with its interface e.g say plug 1 interface 1, u may start numerically till the last plug to be unplugged when u replug start numerically til the last, u dont need a wiring diagram ... Toshiba 46H84 46" Rear Projection HDTV-Ready Television

The TV seems to take ages to turn on, the red on/off light flashes and then goes off completely and the screen stays blank. It then switches on again and after a few seconds/minutes will switch back off. Eventually it seems to warm up and stay on. On occasion it will take up to 10 minutes for the TV to warm up and switch on. Once on there is no problems. I have not tried fixing this as I feel it may well be a job for a qualified technician. Please advise if the TV is safe to use, and what's need


Hi,\012This is an indication of out-of-regulation in the power supply section. The very common caused of this fault is the leaky electrolytic capacitor in that section. It will drop the supply from no ... Samsung LE32A457 32 in. LCD TV

I have a 42 lg lcd tv when i switch it on the right side of the screen is darker than the left also there is a vertical bar about 1" at the edge


... LG 42LC2D 42 in. LCD HDTV

RCA LCD X2620W TV no picture and possibly no sound. TV has no picture and cannot see if speakers are turned off as I cannot get see menu's. Set has 5v standby and 5v switched. I also have 12v switched. I also see 24v that is present with set on or off?. Any and all help is greatly appreciated.


Hi.The PSU looks OK. Double check that Volts are OK on all outputs.Check if there is DC out from main to inverter. If you have no back light: If there is no DC to inverter, then it is usually main board. If there is DC t ... Flat Panel Televisions

My Proscan Tv has a problem where some of the channels are speaking spanish like the amc channel and disney, than it switches channels and nickeloen speaks spanish sometimes. Also some of my channels have no volume but when I turn to a different channel it has volume, that also switches too between channels


... Flat Panel Televisions

I use this Alba television in my bedroom and usually watch it for a little while before I go to sleep. Due to the fact that it cannot be turned off completely (always on standby unless the plug is pulled out) I have connected it to a time switch. When I switch off it goes onto standby and shows a steady blue light. However, I have woken up again before the time switch has cut the power and found that the blue light is flashing. This can be cured by switching the television on and off again. Howe


If the tv is not a plasma unit which are expensive to run I would not be bothered completely turning off the power. I have a power supply readout connected in the mains power and Like you I believed the hype about switching every thing off but I lear ... Flat Panel Televisions

Sabre 29he boiler cut out on low water pressure (constant red led) slowly brought water pressure up to between 1 & 1.5 bar Now in the off position green flashing led aprox every 4 secs as soon as I switch it to heating and DHW and call for heat or hot water LED flashes red aprox 0.5 secs. Ihave checked the water pressure switc the condense pressure switch and the high temp stat all are ok, I have also switched the boiler off and switched it back on after 3 mins to see if it would reset. Before I


... Flat Panel Televisions

Wiring diagram for a table lamp/three way wiring


This is a TV forum ... Projection Televisions

My technika LCD19DVDID-208 Takes 5 or 6 times of switching from standby on and off to get the screen to light up & the picture signal to come through. The sound comes through OK first time. Also some times the mains switch takes a numer of on off operations to get it to switch on to standby.


... GE 13TVR60 Combo

When i switch my xbox 360 on the screen comes on in black and white and shakes from side to side,? also when i switch on my dvd player it automatically zooms in and i have to switch off and restart for it to go back to normal, it never used to do this! is it my tv that is the problem?


It is most likely your inputs that are messing up. This links to the mainboard of the tv (tuner board). You will need to check that your systems are properly hooked up and "snug" on the ports. If that doesn't fix the problem you will need to seek a n ... LG 42LG30 42 in. LCD HDTV

Usevally after power off to the tv for about one hour, if i switched on the tv, the standby LED of the tv blinks about 5 to10 minutes and the same time tv will not on & the remote also does not function.after blinking of LED is stoped ,now i can ON the tv by remote (or) by tv buttons. tv will be working fine . again if i switched OFF the tv for about one hour, same problem will be repeated. resulting i have to wait about 10 minutes to switch on my TV which result incinvenient to me.


It most likely is a error code indicating something is not quite right in the power supply of the set----I would suspect it to be a puffed up filter cap and if so the wait will gradually get longer until the set will never turn back on. ... LG Standard (CRT) Televisions

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0588 seconds