Suggested Questions/Answers :
It is recommended you read all this kind of situations
On Sony model kp-41T65, The whole left side of the screen is blue & the right side is red. Any one know what could be the problem?
I have Sony's 43 inch Projection TV, its model no is KP-ES43 ME1. Problem with it is that it has lost Blue color from its pictures. Anything that is of Blue color turns into different shades of Green color. But one important thing which i would like to share is that when we turns on PIP (Pictue-in-Picture) mode, images on the right side of the TV screen looks absolutely fine but Pictures on the Left side of the screen still have the same problem. I want to know what is the real problem and its
Sony Projection Televisions
I have a Hitachi 43FWX20B. I can see the red is not lined up with the blue and green on the far left side of the screen. Only the red and only on the far left side of the screen. Blue and Green are OK.
I tried the Magic Focus, I get a error code 5. I tried manual Focus of the red on the far left of the screen. I can ont move the red.
Do I need to replace the Convergence Chips? Or could this be a bad resistor? If so, witch one.
Please do us a favor and rate this by cliking the thumps up icon located here >>>>>>Projection TV sets have ...
Philips Magnavox 9P6034C 60" Rear Projection Television
I have a Sony KP-57WS510 and am having problems converging. The red works fine however the blue cross on the outside colums of the convergence pattern is off to the left. I am unable to move these blue crosses far enough to the center to correct the problem. The picture on tv screen has a blue shadded bar on the left side and a yellow shadded bar on the right. I can temporarily correct the problem by turning the television off and then turn it back on. However, the problem does eventually return
The tv convergence board it is dead.The tv convergence board require replacing 2 STK convergence ICS and some or all of it resistors too.U have all the tools and also can do soldering ICS works?Yes,tries websites like Tvrepairworld.com,Tvrepairkits.c ...
Sony KP-57WS510 57" Rear Projection HDTV
Red is ghosting to the right. i replaced the convergence tubes about 6 months ago. went with the expensive ones "not the cheapy's" used heat sync putty stuff and everything. the problem is different then the one i experienced the first time, that was more of a wavy color problem. could this be a convergence issue also?
Yes,the tv problems it is the same,it is the tv convergence problems again,now it just color it is shaded in shadows pictures,instead of wavies mis colors R,G,B mis alignments.Yes.The tv convergence board it is the problems,must be repair again. ...
Sony KP-57WS500 57" Rear Projection Television
Got a LG 50PQ30 plasma tv....acquired two red lines with one blue one in the middle going from top to bottom on right hand side of tv. Transparent on certain colors when tv is on. It is only a year ol
Set should have come with at least a one year warranty and if you yell loud enough they may take care of it (or LG) and give you a concession even if set just beyond warranty.The squeeking hinge gets the oil--people who persist (LG!) will get ...
LG 50PQ30 50 in. Plasma HDTV
I changed my two IC chips and three resistances on my Hitachi TV to fix color alignments. Now the problems is that yellow and blue double image are seen at the bottom of my screen with no much effect on the rest of screen. Manual convergence show a white horizontal and vertical lines with focal right horizontal end with red line no aligned, but if I fix this side, the left side is disaligned. So, I am lost. What can I do?, what is wrong?
Ur tv still have dead resistors parts,test all 12 resistors parts around the 2 STK convergence ICS and changes some more dead resistors parts or changes all 12 resistors parts for sure.If tv still have the same problems after tested and replaces more ...
Hitachi 43FDX01B TV
Need to adjust horizontal position of picture, black bar on left side, lost picture on right side
found a procedure to open menu by holding OK button on TV and remote simultaneously "for several minutes". One problem is the TV does not have a button labeled 'OK'. I tried it using 'Enter' and again using 'Menu', neither worked.
Note, service manuals are suppposed to be available on the LG site, but I could not find them.
LG 32LH30 32 in. LCD HDTV
Avol Tv AVOL ALT4690-FD flickers and is fuzzy on the right side. At first this issue went away after ten minutes. Now it is taking over 30 minutes. Getting worse by the day. I am pretty sure it is a problem with one of the boards, but I do not know which one. Any help would be appreciated.
If you wish to get more details, surf the\012following link. There are over two thousand and four hundred posts. All are\012related to television and other domestic electronic equipment service help. You\012can get a solution there. Type in the brand ...
Flat Panel Televisions
The color on my rear projection TV is a little off. I tried to fix it by pressing the 'test' button below the screen. I can move the red crosshair perfectly on top of the set green one, but the blue crosshair is tilted to the side. Is there any way to rotate the blue crosshair? If there isn't, can I fix this problem without spending a ton of money?
Projection TV sets have two very common problems. One is convergence ( 3D/Warped video) the other is CRT fluid ( Dull Video). Here are more details and solutions for both. Repair kits with instructions are also avail from ...
Mitsubishi WS-65711 65" Rear Projection Television
LG 32LB9D Hi there, my name is felix and i just want to ask you for help, i changed already the bad capacipor on my lg 32lb9d but i still having the problem that i has to plug and unplug the power cable couple of time to have sound and picture on my tv or i have to leave it on for several minuts until warm up. could you tell some idea of what to do to fix the problem? thank you for your help. PS. if i desconnect one of the cable locate at the top right hand side and plug it back the picture and
LG 32LB9D TV
The unit is around 3 years old. When the power button is pressed, the red LED turns blue and stays on, but the screen is black. If the INPUT button is pressed, a blue box appears in the upper right corner of the screen for a second, then disappears.
Does anyone know what could cause this? I am not afraid to tackle electronic projects and have the correct tools...I just have no TV/LCD experience.
Any help is greatly appreciated
There's a good chance you have failing electrolytic capacitors either in the power section or the inverter section or both.Any caps in these sections that look bulged at the top, or bulged/leaking at the bottom need to be replaced.If you ...
Proscan 42LA45H 42 in. LCD TV
My sony grand wega has had blue spots on it for a long time but we have been ignoring it but just a couple days ago it got a HUGE yellow rectangle toward the right side of the screen. It just appeared out of nowhere. What could be the problem? thanks
Bad optical block assembly. Sony will offer you a new tv. have model # and serial number and call 18002822848. ...
Sony Grand WEGA KDF-55XS955 55" Rear Projection HDTV
I HAVE A SANSUI TV I GOT FROM WALMART 2 YEARS AGO. I WAS WATCHING THE OTHER NIGHT AND IT WENT OFF BY ITSELF. I CHECKED ALL THE CORDS AND EVERYTING IS IN RIGHT. I EVEN TRIED TO TURN IT ON BY THE POWER BUTTON ON THE SIDE. THE RED LIGHT IS ON ONLY. COULD IT BE A CIRCUIT BOARD. IF SO WOULD IT BE BETTER TO FIX OR GET A NEW ONE
I see so many here with no sound/nopicture issues:ISSUES: 1. IF sound main fuse/s are good.2. If no power or standby check main fuse, standby power supply and any signsof damage you can see---burnt parts etc.3. almost all thes ...
Sansui 19 in. LCD TV
Samsung SyncMaster 305T
One-half of the screen (the right-hand side) gets dark. It turns black and I can barely read the text in a document. This problem is NOT consistant. In other words, some of the time the right-side lights-up and looks normal.
I have read some of the other expert answers and it seems the flourescent back-light bulb is the problem.
1) Where can I find the part number for this bulb and who sells them?
2) Is there another part in the circuit that may be the
This problem is, as you suspected, almost certainly a problem with your monitor's backlight.\015\012\015\012However, there are a number of possible causes for a backlight problem besides a bad fluorescent bulb. The bulb must receive a goo ...
Samsung SyncMaster 305T 30 in. LCD Television
I am having the same problem with my 3 yr old 52 inch Bravia HD LCD TV. The right side of screen starts out darker than the left side and then in about 5 minutes it brightens on the right and has horizontal lines for another 10 minutes. Then suddenly the whole screen pops on and the picture is fine. Is this a simple fix or an expensive one? I'm very disappointed as we paid big $$ for this set from Circuit City. Sony should be backing up their product with this problem. I have posts all ove
This sounds like the same problem I have with my 52" Sony KDL52XBR6. Its probably the TCON panel. Sony apparently knows of the problem but will not assist, I've tried. To make matters worse they don't sell the components and everywhere I have tried ...
Sony BRAVIA KDL-52W3000 52 in. LCD Television
Philips 30PF9946/79 flickering pixel problem: the right side of the screen constantly flickers straight blue lines .. The left side does the same in a subtle way.. I'm not sure if tv's have graphics c
What is the model# and, make of your tv; ...
Standard (CRT) Televisions
My LCDTV has a problem, Model number is 6626LCT, Now on to the problem, While doing yearly cleaning on my tv as normal, after i plugged it in it was normal for 40 seconds, It flickered and the screen went from Black to white on the input menu. while watching TV it's weird, All the other colors, Red,brown,green,blue, etc turn up fine, It's just the black that has the problem, Like i mentioned before Black is now white, or a fuzzy mix of red,yellow,white,green, or one of each on it's
Only suggestion is if set was plugged in when you did what you did--unplug it and any box or receiver plugged in and wait a while--plug back and let the equipment try to reboot. ...
Sylvania Flat Panel Televisions
Picture with no sound on Samsung LNS-4692DX. Samsung was of NO help. I followed the excellent instructions posted by fun2 and Ida2 but I did not prepoerly remove one of two orange ribbons on the T-Conn board and when I installed the new Tconn, the right half side of the screen has a green tint that distorts the picture badly. The left side is fine. My questions is does anyone know if I need a new orange ribbon and if so, how do I replace the old one at both ends? Otherwise, is the ribbon fixable
Samsung LN-S4692D 46 in. LCD HDTV
I have a sony KP-65WS500 Ztv turns on but screen is blue with lines. I can hear sound but cant get tv on.the red light blinks five times.. Does anyone know what is the problem?
Can you confirm the actual model number of this set? Some had issues with the picture tubes being bad but depending on model number there may be a fairly easy way to adjust around this to correct the issue. ...
Sony KP-65WS500 65" Rear Projection Television
I own a 50PL9126D/37 50 in DLP TV I bought used and the picture is dark so I took it apart because I was told it could be dusty or could be the lamp. After I cleaned the inside screen VERY carefully with a microfiber cloth I reassembled the set and now the power button or blue doesn't come on nor does the remote work anymore. Plus the TV is still dark, which I figure must be the lamp. I can turn the TV on by plugging it in and hitting one of the side buttons (different one every time) and then u
Dlp tvs have dark pictures,first thing u must be alway change the tv projection lamp.Specially,if u bought used,because u don't know how long the projection lamp been inside that tv already.After u change the projection lamp,still have problems or he ...
Philips 50PL9126D/37B 50" DLP TV
I have a problem with my PDP42x40000 it is with the power supply card the following components are damaged STR-F6467 capacitor 47u 35v resistor 0.22 ohm and when i changed this component i couldn't have a picture on the screen only the power led is on with red color and when i press on to have a picture it turns to blue color and go to red again i just wan to know what can i do to solve this problem
this LG PDP42X40000 is on a SANYO plasma TV
Flat Panel Televisions
Hello, I have a Toshiba 57H84R rear projection tv that has developed a problem. Occasionally the screen would turn bright blue for a couple of seconds and then go blank (dark screen, like it had shut off). The red power button would go from a steady red light to blinking continuously and would have to be unplugged, then plugged back in to get it to come on again. One time it did this, there was a bright blue circle in the center of the screen and now there is a permanent yellow spot in the cente
I am 100% sure that this is not an issue with the CRT board(the tiny board attached behind the CRT's in this case the blue CRT). The problem is usually caused due to failure of high value resistors 500K-ohm or higher. Do you have an ohom-meter and kn ...
Toshiba 57H84 57" Rear Projection HDTV-Ready Television
Had convergence issues, green was okay, red wouldn't move horizontal, and blue wouldnt move vertical. Also, functions such as pincushion and tilt wouldn't work with red or blue. Replaced convergence IC, which there was only one with this TV that I noticed, after looking at the service manual. Replaced with mitsubishi replacement part. Still no luck. I assume there is something deeper than just the IC. The guy I got the TV from said that he had it serviced a few years ago with the same problem an
This is a very common failure on these projection sets and a fairly simple DIY fix. All projection sets including Samsung, RCA, Sony, Phi ...
Mitsubishi VS-45609 TV
Gateway plasma tv has 2 vertical black bars on left side, one down the middle, and one on the right side of the screen. Have replaced buffer board - wasn't the problem....
Gateway GTW-P42M303 42 in. Plasma Television