Having problems with your Projection Televisions ?

I can only get one av on my TEAC CRT TV model No. CT-M711S and when i connect my set top box I cannot get it to work - i guess it needs a different av but I have tried and tride with the remote to find it but can't. When the av comes on screen there is a red arrow below it pointing down. I have tried the set top box that came with it, which is a TEACDigital Terrerestrial Receiver Model No. SDB440. Also I have tried my previous set top box that I know works for sure because I had it working

Answers :

Repair Help & Product Troubleshooting for Projection Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

I can only get one av on my TEAC CRT TV model No. CT-M711S and when i connect my set top box I cannot get it to work - i guess it needs a different av but I have tried and tride with the remote to find it but can't. When the av comes on screen there is a red arrow below it pointing down. I have tried the set top box that came with it, which is a TEACDigital Terrerestrial Receiver Model No. SDB440. Also I have tried my previous set top box that I know works for sure because I had it working

... Projection Televisions

I have a Verizon (Frontier) FIOS set top box model HD QIP 7100 1 and an LG TV model 42LD520. The power button on the remote control for the set top box does not turn off the set top box AND the TV simultaneously. The circumvention is to press the TV button and then the power button to turn the TV off separately. I'm thinking that the code for the TV is not programmed into the remote correctly. I've tried 1292, 0205, 0727, 0883, and 1205.

... LG 42LD520 42 in. HD-Ready LCD TV

Was watching TV and trying to adjust the picture quality of my Model VS 6041 TV. The tv has an AT&T UVERSE set top box which has been working fine for 3 years. The TV Remote is looking for an antenna A or B rather then the set top box. Since I dont have a manual, I dont know what I did wrong. All I need is a manual

... Mitsubishi Flat Panel Televisions

I have a sharp aquos model number LC 60le81oun how do I set the settings to input 1 ?? I am trying to hook up external speakers and can't get sound if I hook it up straight to the tv but will get sound if I hook it up thru my cable box but will not be able to way movies from vcr or netflex ...

Input 1 is an INPUT so you can't connect external speakers there and get sound from the television, which is what you are attempting.Your two choices are the 3.5mm minijack hole that says AUDIO OUT terminal, which is under the Ethernet Te ... Sharp Flat Panel Televisions

Hi, Have a Hitachi 42PD580DTA out of warranty. Will no longer get digital channels. Will work through a set top box. Tried Resetting Factory settings in DTT menu. Is it worth fixing? Someone said to replace the motherboard. Is this expensive? Can I do it myself? Where would I get one? Kelly

... Flat Panel Televisions

How do I get my teac plasma model number plh4220sd to change. It says no sync detected? Does it have built in digital tv or do I need to go and set it up with a set top box? How do I do that?

... Flat Panel Televisions

I can't get my Motorola vip1200 set top box to work with my TV. I tried the code that is listed for this TV , but didn't work and I tried to search and couldn't find a code.

... LG 37LD450 37 in. TV

How do I program my comcast cable box (motorala DVR) to my Olevia universal remote (model RC-LTU)? I have not been successful, even with the assistance of Comcast Technical Support, at programming the Olevia TV to the Comcast remote, so I thought I'd try programming the Comcast set top box to the Olevia remote. Thanks of your help.

Hello\015\012You can use code search functtion to find and synchronise the remote with that device you wants to use with. There are some codes prerecorded to the remote's memory. If anyone matches with the code of your device, it will synchron ... Flat Panel Televisions

Vizio E370VL 37 the picture is larger than the screen even at the lowest settings in the horizontal and vertical size. Have tried all four but have the same problem in all of them? Can't read the information at top or bottom or the edges such as scores on ball games. How can I get the picture size smaller on this set? Connected to cable with Cisco HD box.

... Vizio E370VL 37 in. LCD HDTV

My loewe Concept L32 shows the red power light on and flickers when I try to turn on via the remote control.......ie the decoder is not starting up. any button I try with the remote the red light flickers but no response from the TV. I have just installed a Topfeild set top box to receive HD and that and the TV was working perfectly. I have tried disconnecting the Set top box and ussing the TV by itself also turned off the power at swich and tried again.all to no avail. Regards, Colin Sh

Http://elektrotanya.com/loewe_chassis_l2650_concept_l26_l32_basic_sm.pdf/download.html\015\012\015\012\015\012\ ... Loewe Concept L32 Platinum 32 in. LCD TV

Have a grundig tv model gu22wdv4, the menu works, wont tune in and sceem always blue, also have a dvb-t digital top set box, which iv tried and still wont work?

... Grundig Flat Panel Televisions

I have a technisat hdfv desk top box. I have been trying to connect in via the hdmi connection. I keep getting the message mode not supported. It works fine via the scart connection. I have tried changing the hdmi cable but still get the same message. I know the hdmi connection on the tv is ok as I can run a blue ray from it. Took it back to the dealer they tried and got same message. They thought it could be a fault with hdmi on the box. The unit was exchanged. Tried again but still get the sam

You might want to see if a firmware upgrade exists for this issue in the Samsung set you have. ... Samsung Flat Panel Televisions

Bought a AKAI AD183X digital set top box and I can't get it to work. Why?

... Flat Panel Televisions

I have a one for all urc 7562 remote and trying to get it to work with my dgtec8040hd set top box i have downloaded the update and the codes for it dont work

Your device , a DGTEC 8040HD , is not fully supported by your remote. They provide just a partial match code 1242. You can check that yourself in the support section on the All For One site, here at "Find your setup code option"\012\012\012htt ... Flat Panel Televisions

How to remove the parental lock PIN on a Goodmans GDB12X12 Freeview set top box Call helpine 0870 230 1777 Get default codes: 0000; 4000; 4711 (none worked) Try 'Override' codes: 3796 (failed) 2112 (worked!)

... Flat Panel Televisions

I have a 42" FHD LED TV model No. BLED42FHDAE connected by HDMI cable to my set top box, I have to use the Bush remote for volume control and the virgin remote to change channels. Can I get volume control onto the virgin remote? Help please. Betty

... Flat Panel Televisions

I am trying to record on an external hard drive which was sold as a bundle with this but: 1. The REC menu is grayed out and wont let me do anything on it, and 2. when I plug the external drive into the port, I get a message on screen that says WAITING FOR USB CONNECTION and it stays there forever and wont let me do ANYTHING. I have to turn off the set top box and remove the USB cable before the message goes away! The owner's menu doesn't mention this message at all so it's VERY frustrating!

1. The REC menu is grayed out because the box doesn't have where to store the recorded file. This happens because2. The hard disk isn't recognized as present: the WAITING FOR USB CONNECTION message signals that the box can't communicate proper ... Flat Panel Televisions

I have connected my MXT set top box Model No MSTB201SD and it is displaying the word "boot". Can't get passed this. The "Init Install" is not appearing on the TV screen. Can you please help?

... Flat Panel Televisions

A person has pushed buttons on a Olin set Top Box model HVBT-2000 and now comes as locked onto one channel cannot change channels how do I unlock the set top box? Thankyou

... Flat Panel Televisions

I am having problem setting up my hdmi connection with my panasonic viera model TH-L32C10X2. i cant get it connected to my sony ps3. all cable connections are connected. set the tv to either hdmi1 or hdmi2. then tried setting it up on the ps3 console. but when i tried to change the ps3 setting to hdmi setting, the picture goes blank. and after 30 seconds goes back to its original picture. please advice what to do. thanks

I do not own a PS/3, but I will try to help just in case you dont get another expert at this late hour....\015\012\015\012It sounds like you need to save the changes on your PS/3. It is timing out and going back to default because the cha ... Flat Panel Televisions

I have a LG 32LH30 TV. When I power on the TV I get a picture in the top half of the screen and vertical lines in the bottom half. Also I get a thin white dashed line across the middle of the screen. After about 10 minutes I get full screen picture. However the top third of the screen is lighter than the bottom two thirds. I still have the thin white line across the middle of the screen. I am using HDMI cables from my cable box. I also tried Audio/Video and Component cables. I took the back

... LG 32LH30 32 in. LCD HDTV

I have an LG 26LZ5RV TV. I have connected it from the RF output of my Sky+ box (using a coaxial cable) to the "Ant In" socket at the back of the TV. The RF output on the Sky box is set to Channel 35 and the power is on. I know that the output is working, as I have tested it on an old portable TV with manual tuning. My problem is that I cannot get my LG TV to tune in to the signal, using either auto or manual tuning. I have used System "I" and tried setting the Channel to 35 then searching b

... LG Flat Panel Televisions

I turn the tv on and I get the sound from the channel being watched via Comcast box however there is a screaching noise that is over top of the program sound. If you turn the volume up the screach gets louder too. This was an open box display model but I don't recall *** making this noise at the store. Any ideas or suggestions? Also, any ideas on how to change the sound type from mono to surround? I'm thinking i might just have to return it.

Return it this tv have intermittent problems with it tv Tuner signal board.That the board,where the incomming broadcasting signal cable plug into it.U should able just pick one option Mono or Stereo sorround sound on Audio Setting setting selection s ... LG 32LD350 32 in. LCD TV

White screen with small red lines running verticle. I unplug the set 6 or 8 months ago placed it on a dresser wrapped with a bed sheet. Tried to use it again and received a high voltage 110 or 115 shock. I tried other Cox boxes can't get a picture but I do get sound.

The problem is undoubtedly caused by faulty sustain boards. You will need to replace the X-sus and Y-sus boards to resolve this problem ... ViewSonic VPW425 42 in. Plasma HDTV

Audiosonic KM0767 TV set box - The lock light is highlighted on the set top box & I cannot get it off. Consequently I cannot use the remote control. Nothing in the instruction manual to help me, does anyone know how to fix it?

... Projection Televisions

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.2074 seconds