Having problems with your Projection Televisions ?

Hi i have Samsung hl-t6187s when I turn the tv on you can hear the power up sound the tv has dim light that flashes once then goes black. The little green light flashes three times on the front of the tv. This is the led model and can't find much info on this problem. I don't see a bulb you can take out as easily as my other dlp bulb tvs

Answers :

LED means it uses a LED lamp for the light source, may b e that is bad.

Repair Help & Product Troubleshooting for Projection Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

Hi i have Samsung hl-t6187s when I turn the tv on you can hear the power up sound the tv has dim light that flashes once then goes black. The little green light flashes three times on the front of the tv. This is the led model and can't find much info on this problem. I don't see a bulb you can take out as easily as my other dlp bulb tvs

LED means it uses a LED lamp for the light source, may b e that is bad. ... Projection Televisions

M220va wont turn on when plugged in and has a small white led light on the bottom right of the front panel that slowly flashes on and off. i've heard this light will come on when there is any problem with any of the boards, kind of like a safty shut off indicator. this makes it hard to diagnose since you cant look at any of the symptomes. sooo... i was wondering if there were any "common problems" with this model that might most likely need to be replaced (power board? main board?) fuse se

... Vizio M220VA 22 in. LCD HDTV

My problem in my samsung tv model ct-7202wb is dead set but the red led light always flashing

... Flat Panel Televisions

Samsung DLP TV model hlt5676sx/xaa came on fine, then picture started flashing color to gray, then went gray now does.nothing and two blinking lights. What's the problem? Bulb looks perfectly fine.

... Projection Televisions

Samsung SyncMaster 305T One-half of the screen (the right-hand side) gets dark. It turns black and I can barely read the text in a document. This problem is NOT consistant. In other words, some of the time the right-side lights-up and looks normal. I have read some of the other expert answers and it seems the flourescent back-light bulb is the problem. My questions: 1) Where can I find the part number for this bulb and who sells them? 2) Is there another part in the circuit that may be the

This problem is, as you suspected, almost certainly a problem with your monitor's backlight.\015\012\015\012However, there are a number of possible causes for a backlight problem besides a bad fluorescent bulb. The bulb must receive a goo ... Samsung SyncMaster 305T 30 in. LCD Television

Dear Fixya,I have a problem with my Sony Bravia Kdl-32u2000 LCD type television I switched on and the red led light flashes continually with no sequence and both red flashing power led and green led constantly are on at both the same time with no other life except a quiet high pitch noise from the power board area can anyone help me solve this problem.ThanksBrian

... Flat Panel Televisions

I just purchased my Mitsubishi WD52628 projection television used as it only needed the bulb replaced. I replaced the bulb, however now it will only run for a couple of minutes then the remote and all selection buttons will freeze up and it turns itself off. After turning itself off, the green timer light flashes rapidly. Once it has stopped flashing, I can turn it on again only the problem is the same. I have tried the reset button on the front, no change. Any suggestions?

Factory reset with remote, power up tv immediately enter "MENU 1,2,3" ... Flat Panel Televisions

Hi! I have a SONY KV-HR36M31(Australian model). When TV is turned on green light flashes approx.9-10 times and then shuts down.Red light blinks 10 times and then repeats. Whats the problem and can a person with limited knowledge in TV repair fix this problem? Cheers

Type in Understanding Sony Blinking Codes in your search bar.\012Most Common Problem with these tvs is Bad Picture Tubes, First what happens is you will find Shorted Hori output Transistor,then Bad (FBT) flyback Transfomer, then after you repl ... Sony Flat Panel Televisions

I have a panasonic thp50u30a plasma June 2011 model and it has developed a fault. When switched on I hear 3 fast clicks with a 4th click which comes in about 10 seconds later. While this is happening the standby led flashes repeatedly until the fourth click and then the standby light flashes red 7 times. My research has led me to believe that either the SC, SU or SD boards are faulty.. If not one of them then a combination of all of the could be a fault. Thinking that it was the SC at fault, I w

... Flat Panel Televisions

On a mitsubishi tv (LT-46149) the manual intructs us to wait exactly one minute for the LED green light to stop flashing and then its alright to turn on the tv, the problem is that the light wont stop flashing

It is possible that you have a bad power supply, or the TV has been hit by a small power surge and if you unplug the set from the wall for 40Min., it will rest back to normal. ... Mitsubishi Flat Panel Televisions

I have one unit of Panasonic plasma television model number TH-P42C10P. the problem is when i plug in into ac source the led will light up after then it will automatically shut off and the LED is blinking. any solution in this problem?

... Panasonic Flat Panel Televisions

My Sony TV shuts down after you get a bright flash of light from the screen. After it shuts down, the red LED light on the front flashes 8 times. What's the problem?

On some\012projection models of Sony TV sets, this code means that T8005\012(flyback\012transformer ... Sony KP-51WS500 51" Rear Projection Television

I have two small super bright white spots on the screen of my Mitsubishi WD-73833 and was advised by someone that it was a light engine problem. I have searched for hours and can't find any info on where to purchase a new "light engine" or EVEN IF this is the correct problem. Any help would be greatly appreciated!!! Thanks a bunch!!!

You do not need the entire light engine replaced. That would be a really expensive fix(about 1000$). All you need is a new DMD board. I can help you find a replacement if you are willing to fix it yourself and give you instructions to replace it ... Mitsubishi WD-73833 73" HDTV

My panasonic 1080i will not turn on. Hit the power button and the light starts flashing green but nothing happens. After about 20 seconds or so the light goes back to red and flashes. Nothing works on the remote now. I bought this from Sams club as a close out as it was the last one (floor model) and did not have the manual. Have not seen any solutions to this problem as of yet. Please Help! W have not TV and are paying for service now.

... Panasonic PT-50LC14 50" Rear Projection HDTV-Ready Television

Hi I have an Akai 42 in. LCD TV Model# LCT42Z5TAP,when I try to turn on the TV the green LED light comes on but the screen does not ,then i try to turn it off but it does not comes off the green LED light remains,so i have to unplug the TV in order to turn it off then turn it back on the problem remains the same as before, so I leave it on for 10 mins unplug it again then turn it back on and only then it comes on and works proper.It seem the Tv now needs to be warmed up for 10 mins or more for

... Akai 42 in. LCD TV

I have the Samsung LED DLP Model number HLT6187SAX/XAA, Version RE01, Awhile ago while i was watching a movie the tv went black with just the audio still working. I turned off the tv than turned it back on, it came back on but with a blue green tint, it kept flashing blue. I took it apart and cleaned the heat sinks on the LED's as they were very dusty. Now it works fine but with out any red colors. I believe the red LED burnt out. Is there only one light engine for all the LED's or does each LED

... Samsung Projection Televisions

I have a philips tv model number is 60PL9200D/37. when i turn on my tv the blue power light flashes and the lights and fans cut on but not the actual screen. after a few seconds of blinking the lights and fans turn off and a light symbol and key symbol come on at the power button. we have bought a replacement lamp buld and the item number to the bulb was PHI389 and it still does the same thing.

U hear alots of clinking too,when tv power on and the projection lamp tried to come on?Yes,tv have a problems with it board call the Ballast board also.This Ballast board only job is to help ignite the tv projection lamp. ... Philips 60PL9200D Projection Televisions

My rear projection 1080i..will not work..all of a sudden..the red power light in front flashes..like its going to work..but the remains a steady red light..with no lights in back and no pic whatsoever..if its convergence..unable to afford the fix..but if a bulb would consider..I just can't afford to waste on not the problem..question is, how's do I know?

Sets that have convergence circuits do not have a lamp or bulb--for more help I need to know the brand and the MODEL number of this set. ... Samsung Projection Televisions

TV model 40RV753. Brand new. Setting up problem. Red/green light goes green for a very short time, during which 2 short 1 second bursts of an image with sound. light then turns to a flashing orange light. Left with no picture only sound. Unable to proceed with setting up.

Hi Gordon,Did you fix this problem? I have exactly the same model with exactly the same problem. I've checked the capacitors on the PSU board (as suggested in one of the responses above) and they all seem OK. If you fixed the problem, I'ld re ... Toshiba 40RV525R 40 in. HDTV

Sony model KP 57WS520. No picture when turned on. Sound only Standby light flashes ten times What is the problem?

Here is a forum with the general answer to the ten blinks etc.ht ... Projection Televisions

My panasonic plasma TH42PX600A is not turning on when i try to turn my tv on it flash a green light and the give 10 blinks of red led. and after that when i disconnected the TPNA3814 sc sustain board from other boards it shows the constant green light. i want to know that if i replace the TPNA 3814 sc is that fix my problem.

... Panasonic TH Flat Panel Televisions

White LED scrolling then click and then the top two LED lights turn red with the first one constantly on and the second one flashing.hey guys we were given a rear projector tv by family friends and they said they were watching it one morning and it just stopped working they said it was a bulb issue and it needed replacing but further research tells me its not. i read in another question it could be C871 problem? something to do with the first filter board.

You possibly have a lamp issue but most of the cases like that,,The capacitor is leak or bulged on top..You have to replace it to fix the problem ... LG 62SX4D 62" Television

I have a Hisense LCD TV Model No: LCD32V68P We had a power failure and now find that we have blue standby light a red light flashing every few seconds but the TV will not turn on,

... Hisense Flat Panel Televisions

Ballast problem? I replaced the lamp after it ruptured, and it doesnt work indicating yellow flashing led light, and voice command saying lamp not working. I tried 3 different times same problem. I also put the back cover back all times. I was told it may be the ballast

The ballast is possible if it does not light the lamp even for a few moments----about the lamp= generic bulb or a OEM Toshiba lamp unit? ... Toshiba 65HM167 65" Projection Television

I have a JVC HD-52FA97 projection TV. After about 10 seconds after turning the TV on the red lamp light and blue power light start flashing together rapidly. The TV sounds like it is turning on, but there is never a picture or sound. Any idea what is wrong and if this is something I can fix? I would hate to buy a new bulb and have that not be the problem.

The lights may be related to each other or their problem might be isolated.For the red lamp light, it is not necessarily a faulty bulb but an error which may affect the bulb. It could be because an error detected. The fan's temperature ... JVC HD-52FA97 HDTV

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.2851 seconds