Having problems with your Projection Televisions ?

Audiosonic KM0767 TV set box - The lock light is highlighted on the set top box & I cannot get it off. Consequently I cannot use the remote control. Nothing in the instruction manual to help me, does anyone know how to fix it?



Answers :

Repair Help & Product Troubleshooting for Projection Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

Audiosonic KM0767 TV set box - The lock light is highlighted on the set top box & I cannot get it off. Consequently I cannot use the remote control. Nothing in the instruction manual to help me, does anyone know how to fix it?


... Projection Televisions

I have an LG 26LZ5RV TV. I have connected it from the RF output of my Sky+ box (using a coaxial cable) to the "Ant In" socket at the back of the TV. The RF output on the Sky box is set to Channel 35 and the power is on. I know that the output is working, as I have tested it on an old portable TV with manual tuning. My problem is that I cannot get my LG TV to tune in to the signal, using either auto or manual tuning. I have used System "I" and tried setting the Channel to 35 then searching b


... LG Flat Panel Televisions

Hi i got a vhs/ dvd recorder from a friend who upgraded,but dont have a manual,i have set it up to my portable tv upstairs,which has a set top box,but dont really know if i have the cables right. the problem is i can watch the videos but cannot record them to dvd,when watching them the dvd button does not record,but when you switch to dvd the record button works, im sure i have the cables in wrong. please can you help me audrey


Hello Audrey,\015\012\015\012If you can watch the videos on the TV, your cables are correct, but you don't generally record a video to DVD using the record button. Most VCR/DVD combinations have a DUBBING button on the front of the ... Flat Panel Televisions

Was watching TV and trying to adjust the picture quality of my Model VS 6041 TV. The tv has an AT&T UVERSE set top box which has been working fine for 3 years. The TV Remote is looking for an antenna A or B rather then the set top box. Since I dont have a manual, I dont know what I did wrong. All I need is a manual


... Mitsubishi Flat Panel Televisions

I can only get one av on my TEAC CRT TV model No. CT-M711S and when i connect my set top box I cannot get it to work - i guess it needs a different av but I have tried and tride with the remote to find it but can't. When the av comes on screen there is a red arrow below it pointing down. I have tried the set top box that came with it, which is a TEACDigital Terrerestrial Receiver Model No. SDB440. Also I have tried my previous set top box that I know works for sure because I had it working


... Projection Televisions

Hi, I have a Sanyo tv. Turned it on this morning and have no sound! I have sky and a PS3 but cannot get sound from iether! I can get sound from the PS3 using my headphones! I've tried as many different things as I can find online to fix the problem but cannot get the sound back... I've turned everything on then unplugged the sky box for 5 minutes and plugged it back in-nothing I've tried resetting all audio options-nothing I cannot rest the tv as a unit as I am using an universal remote . Can a


Have you checked its speakers? If not, check them. If they are found OK, then there should be some fault to its audio output circuit. Check and replace damaged component/s, or, change it a card bassis. ... Flat Panel Televisions

I have prchased a Proline DFV19U digital set top box and follwed the instructions to set up What I find is that if I press the channel up button it changes the TV channel from AV1 and I have to reset it.I have been told the digital box frequency is to close to the TV remote frequency. If this is the case how to do I fix it Regards, Harry Risk


Unfortunately, if you have two unitswhich use similar remote control signals then there is not a lot you can do except prevent one of the units from receiving signals (or replace one of the units with a different make). If you use the TV remote contr ... Flat Panel Televisions

I have just been given a TEAC HDB843 set top box, still in the packaging, but with no instruction manual. I need the instructions to set it up. Do you have any idea where I can get one (preferably online)?


... Flat Panel Televisions

I have a woolworths digital set top box but do not have a manual. Switchover is 30 March. Are there any instructions you can give regarding the retuning of the box as there does not seem to be a 'first time installation' setting on the menu, or maybe I am looking in the wrong place? Thank you


Tryhttp://www.woolworths.co.uk/web/en/contact.pagefor information on tuning etc. or replacement if only a few days old.Hope that hel ... Flat Panel Televisions

I had sound but no picture on my Element Electronic FLX 3211B LCD Television Set. I replaced two capacitors, and now I have lit screen by turning on the tv on the side panel. Remote does not control the tv and no indicator light are on. But the tv screen is lit. the indicator light and the remote controlling the set may be the same problem. Does anyone know how to fix this ?


You might have bad capacitors still that you cannot see. The only way to be sure is with an ESR meter. Check all the connections on the boards again to be sure that the sensor for the remote did not come off. ... Element Electronics FLX-3211B 32 in. LCD HDTV

Instruction manual for DTT5212 box set digi box


... Flat Panel Televisions

1. I have difficult to turn on/off the monitor by remote control box. There is a local manual POWER LINE SWITCH on/off on the monitor set? 2. When I insert DVD player, video is OK, but audio level is very low at the max control level on both monitor remote control and DVD remote control Thanks Federico Savina


Hello\015\012I can't find the model number of JVC you quated here by net. If you don't mind, can you inform me; where are you from now, and form where you bought this decvice?. I'm from South India. ... JVC GD-V425PZW Television

I need an Instruction manual for a ideaq HTU-1000 set top box


... Flat Panel Televisions

Hisense HL81V88 Have just disconnected my Austar Box and plugged in for normal TV. Have auto tuned the Tv several times however channels not being picked up. Have checked to ensure antenna coax connections are correctly installed. Have now reset to factory settings. have auto tuned again and still no result. Thought it maybe related to the system setting needing to be set for Australia BG however dont know how to bring this screen up to check this. Cannot bring the TV back to original first time


... Flat Panel Televisions

Sharp LC-26P50E. Can't tune the channels and those that have auto tuned through the freeview box revert to channel 11 automatically after about 3 minutes. Channel display box in top right hand corner of screen constantly alternates between 'mono', 'nicam' etc. Also cannot find the instruction manual for free on-line.


... Sharp Flat Panel Televisions

I have a small Sharp TV-VCR combo model # 13VT-L200. It only has a multi brand remote and so far works with the TV fine. the menu comes up with the remote but the remote and the TV control buttons don't move the selection choice at all. So no adjustments at all. I have viewed other postings that are similar on manual download and fix-it websites that remain unanswered. Do you know a way to fix this problem I am having? Thank you, Tom Sullivan


Possible that the remote is faulty , sometimes the carbon tracks would have worn off, you will need a repair kit to write the tracks. Also to check the remote IC for all functions from the inputs. \012\012 ... Sharp 13VT-L200 13 in. Combo

I have a tv remote by bsi international that looks like mark martin's #6 valvoline race car. I cannot locate the instructions to set the code for my tv. Do you know where i can find the instructions?


... Flat Panel Televisions

Maxim mx11-48 I have no owners manual and cannot get it to tune in, there appear to be loads of different setting but i don't know how to set it up.


... Flat Panel Televisions

My 50 inch Philips Plasma TV is normally connected to a Virgin Media HD Box in order to watch TV programmes. Tonight my TV is showing a box that is called Information, and it has the wording No signal or bad signal condition. Please check antenna connection and position. I have attempted to switch the TV off and unplug it from the mains, however the remote control and when pressing the buttons at the side of the TV nothing is happening. When I first switch the TV set on the power light is flas


Unplug both the set and box from power for a while--either may have caused a glitch---power both back with everything already connected and see if the reboot that will happen helps or not--a lot of times the box causes this by confusing the set it is ... Philips Flat Panel Televisions

I have just purchased a new 26 inch TV, full HD version, from Curry's. It was purchased to use with my new BT Vision + box. O have tried to get my BT vision remote to work my TV but all the codes offered by BT don't work. The man at Currys says check the Logik website but can I find one, no. The BT vision box says if you can't find the code refer to the manual, nothing there regarding 4 digit codes, hence my trip back to Currys. Whilst not life or death it would be nice to control the TV and


You mmight try looking at bt answer forum on same subjectvarious code options herehttp://community.bt.com/t5/BT-Vision/Codes-For-Logik-Tv/td-p/364531 ... Flat Panel Televisions

JVC AV-36D502 belonging to my 99 year-old father somehow got set to close captions (i managed delete the closed captions) and SAP. i cannot get the SAP setting changed to STEREO. using the menu i can get STEREO highlighted, but the TV is still in SAP mode. i don't understand exactly how things are selected in the menu--the manual says toggle up and toggle sideways, but says nothing about how to lock in changes. best i can do is make changes and quit the menu, but the SAP selection is unchang


... JVC AV-36D502 36" TV

Volume will randomly increase or decrease after this happens the volume cannot be manually adjusted with the remote control or on the tv volume control. The only way to fix the problem is to unplug the tv & reset it and that does not work all of the time.


Look for bad capaciotrs they will be vented or swollen on Top. ... Philips 42PFL5332D 42 in. LCD Television

I have a remote control CHUNGHOP RM-230E with it instructions manual. I want to use it with a DVD SANKEY, but the manual does not show the code for SANKEY Brand. Is possible to know wich code I must to use? Thanks.


... Flat Panel Televisions

I want an instruction manual for an Hitachi HDR505 set top box


My Hitachi freeview + recorder hdr505 keeps freezing when i go to tv guild to set to record programs ... Projection Televisions

Remote control zoom function for CDVB51N set top box has no instruction, can you help find how to use it.


... Flat Panel Televisions

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1604 seconds