Having problems with your Projection Televisions ?

I have a dion set top box DTR250SS10 which when 1st installed worked fine. We have now lost all digital channels and when you go to retune it you get the message no signal and no carrier found. When you unplug it and put the ariel straight into the TV all the digital channels are there so we do have a signal



Answers :

I have same problem did you get a fix?

Repair Help & Product Troubleshooting for Projection Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

I have a dion set top box DTR250SS10 which when 1st installed worked fine. We have now lost all digital channels and when you go to retune it you get the message no signal and no carrier found. When you unplug it and put the ariel straight into the TV all the digital channels are there so we do have a signal


I have same problem did you get a fix? ... Projection Televisions

We have a dion set top box DTR250SS10 which worked fine when 1st installed. Couple of days later the signal has gone and when we try to retune it it says No Carriers found ! and has no signal. If we plug the ariel back into the tv then all the digital channels are there so we do have signal


... Flat Panel Televisions

Tv tuning - cannot retune to digital channels. when tried to tune auto scan, starts searching progress and then message appears saying information - carrier not found!!! If you do carrier setup message appears saying database empty.


... Flat Panel Televisions

My Durabrand dwt1304 was hooked up to cable. I now have relocated the TV into my workshop and am attempting to hook it up to a digital converter and an antenna. Turning the TV on, I am getting a "Helpful Hints" message on the screen that asks if I have performed an "AUTO PRESET CH". I found this on the remote's menu and ran it, after which the screen gets the message, "NO TV SIGNALS". At that point, I can get the TV to do nothing else. Trying to run through setup with the digital converter


I suggest to go back to the menu and make sure in the connection or signal type to select antenna.. Since you had it hooked up to cable it may not have been selected to go back to antenna. Hope this helps you out. ... Durabrand DWT1304 13" TV

Samsung la26r7 the TV has no sound or picture on DTV. it show a "no signal" message on all Digital TV channels but work perfectly with DVD's. The signal strength is 95 & there are nil errors on the DTV Menu


... Flat Panel Televisions

Hi! I have a Sharp LC-37D7U and my cable company just started switching to digital at the rate of 20 or so channels per month. I was able to receive analog cable or digital cable through my analog cable receptacle on the TV, but only one or the other. So I put a signal splitter on the cable coming into the house and ran one line to each input and then it worked perfectly. I turned off the set and went to bed. Today I get no digital signal, only the signals from the remaining analog channels.


No it's not your TV set maybe you're cable company is not feeding the digital signal or having technical adjustment/problem you can inquire from them about the digital signal they are providing...and let me know it so we can proceed to other steps.. ... Sharp Aquos LC-42D62U 42 in. LCD HDTV

I have a sanyo flat screen HDTV. It was working fine, and now it isnt working at all. It says no signal on every channel, so I did a channel search, and it found some channels, and it only lasted approximatley 20mintues before it went back to no signal. Now every time I do a channel search it only finds channel 68. This TV was bought as a christmas gift, so its still new. Whats wrong with it? What can I do to get a signal?


It might be wrong in your TV settings. try to set in PAL or NTSC, once you search a channel ... Sanyo DS31520 31" TV

Coby 22in. TV/DVD Combo Digital Ready My dad just purchased this TV and all worked fine. He did not have a cable service. Then TV dropped channel 12 followed by CH.8 a couple weeks later. Entering the CH manually results in the "No signal" box. Rescanning channels via TV menu results in TV skipping both channels as if they don't exist, just like their customer service department. . Workaround involves hooking up a digital converter box. Any ideas other than throwing it in the garbage? Their pro


... Coby TFDVD2295 22 in. LCD

My evotel tv has lost its digital tv channels. i have carried out an auto tuning for the digital channels but only the 11 BBC channels are found. can you help?


... Flat Panel Televisions

Coby 22in. TV/DVD Combo Digital Ready My dad just purchased this TV and all worked fine. He did not have a cable service. Then TV dropped channel 12 followed by CH.8 a couple weeks later. Entering the CH manually results in the "No signal" box. Rescanning channels via TV menu results in TV skipping both channels as if they don't exist, just like their customer service department. . Workaround involves hooking up a digital converter box. Any ideas other than throwing it in the garbage? Their pr


You could just reset back to factory defaults and let it rescan for the channels again. ... Coby TFTV3225 32 in. LCD TV

We can't the dion freeview box to scan automatically for channels because it says there us no signal. But we have a different freeview box in another room that's working fine. Because the signal went we wiped the channels so we could load them in again and start again. Now we can't get it to scan and see any channels.


... Flat Panel Televisions

My technika digital tv/dvd has lost signal on the DTV.i have tried to reset it/retune the channels for the last hour and its doing nothing.ive turned off/unplugged and turn back on put the same problem.theres defo signal there as i can ONLY get channel 5 on the ATV setting..any help


... Flat Panel Televisions

I have a haier led tv and am running the auto channel scan, it is only listing found channels under the rf ch option and nothing under the found, analog or digital options. The tv is not hooked up to any sort of box. But is connected to a cable cord.


It sounds that the memory IC do not memorize the tuned frequency. Might be an IC fault. Just do a hared reset to this set, and check. Unplug the TV from AC mains wall socket, and re-plug it back after 10 minutes or so. This must make it a hard re ... Flat Panel Televisions

Viewsonic n3290w-au Initially digital audio and video were out of synch, and epg was showing no information for all channels. Ran the auto tuner again and it won't find digital channels at all. Analogue is fine. Have checked cable from tv all the way back to antenna on roof, can't see any problems. What can I check next? Trying to get hold of another tv to check if signal from antenna is okay. Haven't tried a different fly lead, but if analogue reception is perfect then surely the cable is fi


... Flat Panel Televisions

Tried to auto tune my JVC on the 18th to get the new digital signal, lost all channels and can not seem to be able to tune. any one can help please? do i need to buy anything to be able to get the digital signal?


What is the model number of your JVC TV? ... JVC Standard (CRT) Televisions

Hi, i have an LG 42LH5000 which is about 18 months old. Recently I lost all of my digital tv channels, each one said no signal. I re-scanned the channels and got most of them back, however the following channels will not be detected ni matter what I do, ITV, Channel 4, Channel 5, ITV 2, Dave Ja Vu, E4 and E4+1. I thought it might be the antenna but my flat mate uses the same roof antenna as me and he receives all of these channels fine. I've tried unplugging it from the mains power and also perf


... LG Flat Panel Televisions

I have all possible favorites entered, all HD channels, most are 600 numbers (my carrier is Comcast). They have stopped working: it'll get as far as the 6 and then go to channel 6. Sometimes it will get the second digit, but never the third. Also, entering in the channels manually on the number pad doesn't work either. I changed the batteries but still experience these symptoms. To avoid channeling up from 6 to the 600 series I access the onscreen Guide, but even arrowing down through that


The firmware on the cable box has become corrupted. The only thing you can do is to perform a general reset, update the firmware as explained in the manual (follow the procedure to the letter) and try to scan and arrange them again. If it fails even ... Flat Panel Televisions

My mother in-law has a 32 Broksonic Hdtv today the digital channels stopped working on analog channels are working but they have no signal


... Broksonic TV

Insignia NS-30HTV 30 screen is black on all inputs, and says digital channel signal strength is low, can i fix this?


You need to get a digital aerial first .then you can sort out any other problems from there ... Insignia NS-30HTV 30" TV

I have an LG flatscreen, trying to set up for free digital channels. The picture comes in for a few seconds, then goes black, with no signal. I have an RCA antenna booster. how do I get my channels


... LG 42LC2D 42 in. LCD HDTV

My tv qiut picking up channels , says signal to low i had 37 digital channels now zero. it still plays dvd's


... Toshiba 52HL167 52 in. LCD HDTV

I cannot get all digital channels when I install the TV . Message that appear: viaccess CA prompt No right to access video. I have checked cable and CA modul. Old tv showed all channels


... Flat Panel Televisions

Digital channel signal strength is low what does it mean on screen with no channels


... Sansui 32" TV

Kenmark 22LVD02D digital tv - had to replace arial cable and now tv wont pick up the digital channels. Other tvs work with the cable so arial and cable working. Message appears telling us to go to Settings menu to add new settings but there is no settings menu.


... Flat Panel Televisions

I can't get the Pause-Live feature to work. I am using a 4 gig Lexar drive. When I try to pause it I get a message that it only works on digital programming. I am on a high def channel when I get this message.


... Vizio VM230XVT 23 in. TV

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0993 seconds