Having problems with your Flat Panel Televisions ?

I had one of my computers hooked up to my Polaroid TLA-04011C today. It shut off and never turned back on. No power light no sign of life at all. Check fuse by the power cord and it is fine. What could this be??

Answers :

It is the power board. You will need to have a quailified service person replace it.

Repair Help & Product Troubleshooting for Flat Panel Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

I had one of my computers hooked up to my Polaroid TLA-04011C today. It shut off and never turned back on. No power light no sign of life at all. Check fuse by the power cord and it is fine. What could this be??

It is the power board. You will need to have a quailified service person replace it. ... Polaroid TLA-04011C 40 in. LCD TV


I see so many here with no sound/nopicture issues:ISSUES: 1. IF sound main fuse/s are good.2. If no power or standby check main fuse, standby power supply and any signsof damage you can see---burnt parts etc.3. almost all thes ... Sansui 19 in. LCD TV

The TV doesn't power up anymore - i've checked the cord connection, made sure the power switch is in the "on" position, etc. basically ran through all the possible troubleshooting solutions. the little amber power indicator doesn't even light up anymore so it seems there no power registering into the unit at all (i've checked the outlet too). any suggestions?

... Maxent MX-26X3 Television

Television would not power on one day. no sign of any problem previous to this-it just wouldn't turn on . I started troubleshooting by confirming voltage present at the outlet it was plugged in to , then checked continuity across the power cord and from the power port on the unit to the first fuse(f1) and across the fuse itself. all checked out ok. what should i do from here? tv is a SOYO DYL032D LCD

Next is check the power supply section/board replace all bulging capacitors from the power supply.use the same value and rating of capacitor.Resolder also all the components from the power supply.re tighten all the connectors..you can also replace th ... Soyo DYLT032D 32 in. LCD Television

We found a vizio LCD tv outside so we brought it in in the hopes that we found a good tv for free. We didn't find a power cord but the one from our computer fits it. And the light on the front comes up orange. We don't get any sound or picture. Do we need to buy a real power cord for it? Or could it be something else inside the tv?

... Vizio VO47L 47 in. LCD TV

TV will not turn on. The lights on front of TV are not lit either(power saving, stand by light). I checked the cord and have power coming in to the back of the TV.

Hello there,Step 1: check all connections redoing them if needed mean remove the cables and plug everything back in .Step 2: check the plug, plug something you know works into the plug to Test it if the plug has po ... Hitachi P42H401 42 in. Plasma HDTV

Mitsubishi WS-55809 tv has a 2-3 error code, what do I need to check. I previously had a 2-2 error code and replace the two pico fuses and the two convergences. When I put it back together it powered up and could see it was working on the screen and after about a minute or two, two lights lite up with the exception of the red and then set shut down and just has a clicking noise. Could you please tell me what to check next?

... Mitsubishi WS-55809 55" Rear Projection Television

I have a lg 47 lcd tv. model num. 47LD500. only about a year old when this happened. Was working fine and just shut off by it self. will not do anything at all. no sounds lights nothing. Have checked power cord and all ovious things. Remover back cover and checked fuse and all capacitors look ok. Is there any downloadable test spect. and instructions for the power board. I have a good meeter and pretty good knollage of electronics. any help would be great. Thanks

Check power supply ... LG Flat Panel Televisions

Mag TV Model 3200 MA-32EF1AC no power at all. ??? the fuse at the power cord is good. No red light indicating power is on and no sign of power entering the tv.

... Flat Panel Televisions

ILO-32HD - No power, nothing, I checked the power (with a meter) at the plug going to the board (power cord) and got 115v but not even a red standbuy led light comes on. I read on one site that it ne

... iLO Flat Panel Televisions

TV was working fine. Shut it off, all power went, no red light or any other sign of power. Will not turn back on, as if no power source. Unplugged for 1 hour, plugged back in again, nothing, uplugged over night, plugged it in, still nothing. Tried other outlets. Checked the safety fuse, it is good. This TV is not over used (2 adults), TV is 2 years old.

Hello,ok you have done almost everything you can do with a no power on Tv problem, if you have the tech background you could try using a volt meter to see if the TVs power supply is getting the power it needs or if there is a lose wire on the p ... Element Electronics FLX3711B 37 in. LCD TV

I have LG 32LD330H Flat screen TV which goes off after powering. You touch at the back or tilt to check power cable at the back, it comes on but goes after a while. Power cord well connected and firm. What could be the issue?

... LG 32LD330H

My 42inch rca scenium tv cuts on and the little light at the bottom is green then it cuts right back off and the light at the bottom blinks five times ive already checked the power cord and thats not

... RCA Scenium HDLP61W151 61 in. HD-Ready Television

Samsung HP-P4271 42 in. HDTV Plasma power problem. When plugged in, won't turn on, just red standby light. Checked fuses (has continuity), capacitors (visual looks good), noticed blackened bulb near fuse in power board... could this be the problem?

Yes,this is the problems,might have bad plasma screen panel itself.Have a tv tech.to check it out.If the plasma screen panel it dead,tv not worth repairing.Plasma screen itself will cost the same as a new tv,if u able to buy it. ... Samsung HP-P4271 42 in. HD-Ready Plasma Television

TV wont turn on after a storm. Unplugged it over night and still will not turn on. None of the power lights are on. Cord is getting power. Husband checked it with some kind of wire thing

... AOC L32W961 32 in. TV

TV WONT SWITCH ON LE26A456C2D standby light blinks 5 times, 1 long, 4 short then goes out and tv wont come out of standby. You then have to remove the power. PSU capacitors do not show obvious signs of failure. Are these obvious signs of PSU failure or could it be the main board

Please read my giude then you may understand more as to what it takes to make the TV functions.\015\012Basic LCD monitor and TV troubleshooting guide:\015\012 ... Samsung Flat Panel Televisions

Hi guys I have a technika, LCD32-m3. I ha a problem where the TV kept switching itself off(no power at all) and then some days it work after leaving it for a while. Now it just won't switch on at all(no red light or any signs of power). Can anyone help me? What could it be?

... Flat Panel Televisions

I have a Polaroid 2611-TLXB TV that was manufactured in September 2007 and recently, I turned it on one night and there was no screen at all. The blue power light was on though and I could turn it on and off with the remote but still no screen. I tried unplugging it and plugging it back in but nothing changed. I checked the back and there is a red blinking light.

... Polaroid 2611-TLXB TV

I have changed out the H.O.T. and the flyback on my R52WH74 model tv because it wouldnt come on and it would make a chirping noise I checked all the fuses and capacitors now with the new parts in the green power button light comes on for about 2 seconds and then goes off with a low pitch chirp it does this 3 times and then nothing i checked all fuses and capacitors again and found that 3 are not responding one is cp049, rp050 and cp050 could thiese be my problem or is it something else?

... RCA R52WH73 Projection Television

Viewsonic n3260w will not turn on no green light and I have check the plug ,cord and power at the wall

Good day!!!!That problem is usually cause of faulty capacitors on the power supply board..Just follow this instruction to fix your TV..1. Open the back cover of your TV.2. Look at the power supply board..Its normally c ... ViewSonic NextVision N3260W 32 in. HD-Ready LCD Television

My red standby light is off, checked the cord, had a power surge recently?

Good day.This is the D.I.Y steps for troubleshooting.\012\012Open the back cover of your TV by removing all screws.\012Power ON the TV to perform a voltage data.\012 ... iLO V27DMBX Television

I have a hitachi 51f59a hdtv and when you turn it on the light blinks and goes off. i checked the capactors and they look good. i replaced the capactor next to the power cord 200v 1200mf and it did not help. just wanted to know am i on the right track with the caps. or is it something else

... Projection Televisions

Need a power supply cord for the TV byd:sign, Model d:2232. I have been surfing the web with no success. It has to be a female adapter with 8 pin. Could you help me with this?

Can you send me a snapshot of the present AC cord? ... Flat Panel Televisions

Lc46xdie No power no lights I have checked fuses what could this problem be

... Sharp Aquos LC46XD1E 46 in. HD-Ready LCD Television

Iam a tv mechanic i have got a sansui tv which has no blue colour on it. i check all related parts and found IC TDA9370PS/N3/A/1839. So i replace the IC with the same number and code. but when i power on the TV there was low light without raster. The remote control handset was also not functioning but television key was functioning. I had also done some factory adjustment. so i would like to know how could i rectify the problem

... Philips Portable Televisions

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1411 seconds