Having problems with your Flat Panel Televisions ?

My polaroid fxm-1911c picture is distorted, sound distorted with loud buzzing when I try to utilize the tv signal input jack, also the dvd player doesn't work


\015 I hooked up my coaxial cable from my satellite to the signal input and the sound is loud buzzing, the picture is black and white and kind of blurry. When I hooked up my xbox to the composite jacks, it looked/sounded fine. Could it be my cable, or is the signal jack messed up somehow? Also, my dvd player doesn't work. Thanks.\015

Answers :

Looks like there are some partial defects in the TV and might need attention of a qualified service technician. Anyhow, make sure that the input cable, RC jacks and sockets all do not have any loose contacts. Go through settings and ensure that every set up is as it should be.

Repair Help & Product Troubleshooting for Flat Panel Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

My polaroid fxm-1911c picture is distorted, sound distorted with loud buzzing when I try to utilize the tv signal input jack, also the dvd player doesn't work


Looks like there are some partial defects in the TV and might need attention of a qualified service technician. Anyhow, make sure that the input cable, RC jacks and sockets all do not have any loose contacts. Go through settings and ensure that eve ... Polaroid FXM-1911C 19 in. LCD Television

My RCA flat screen was working just fine and than as I was watching TV the screen flickered off and the it started flashing unusable signal. I did a rescan of the channels a couple come back that I have never had before. The sound doesnt work on the few channels that I do get and the picture and sound doesnt work on the ones I use to get. I also tried to put a dvd in. The sound works but not the picture doesnt. What do I do


... RCA Flat Panel Televisions

I have a Sharp Aquos 40E67UN. We came home yesterday and although the TV turns on and our directv box turns on, the tv just has a blank screen where you can go to different inputs, but none of the hdmi inputs work. I also tried hooking in my DVD player via 2 different hdmi cords to make sure that it was the direct tv box that was the issue, but the DVD wouldn't work either....just a blank tv screen (but its on). Any ideas on what could be wrong? I can change the channels, the remote is still


It's possible that you have a faulty component on one of the circuit boards inside your tv.\015\012\015\012It sounds like your backlight is working OK since the screen is lit up despite having no video so the fault is either with the MAIN ... Sharp Aquos LC-46D62U 46 in. LCD HDTV

Hello, I just bought the KDL55EX720 LCD TV a few days ago. I originally hooked a DVD player up to it with the standard AV cords & it worked great. Lastnight I purchased a Blue Ray player and hooked it up with an HDMI cable. When I go to input it shows the HDMI connection, but when I select that connection the screen goes dark as if the TV is off so that I cannot go through the setup process with the Blue Ray player. I reset to the factory settings, but having the same problem. I have also tried


... Sony 55 KDL55EX720 3D LCD TV

My Emerson TV-DVD combo powers on and runs a channel search or tries to change settings on its own. It also over-rides signals from the remote. It switchhes modes so that I cannot watch DVDs. Occurrences of the problem are random day and night.. I have tried covering the sensor with aluminum fois and by hanging a CD in front of it. I have changed it's position in the room and the direction it faces three times. Nothing works! It is not connected to any input media, I only use it for watc


I think problem not from remocon.\015\012Switches on front may cause it.\015\012Open than replace switch may solve this problem. ... Emerson EWC13D4 13 in. TV/DVD Combo

I'm trying to feed a TC-L32C3 from a DVD player. Connecting with a coax sometimes works but most of the time I get a "No signal" message. With HDMI I can't choose HDMI1 - it's greyed out. No picture or error message with HDMI2. TV and DVD player worked OK before I got a PVR


... Panasonic 32 TCL32C3 32 LCD TV

Suddenly my HMDI connection soes not work? Tested cables and they are fine. Component signal from DVD is fine. Imputs are fine- Tested other DVD player and it also no signal- I have two HDMI ports and neither worked. What is up? What can I do?


... Panasonic TCP42C1 Plasma TV

Trying to connect a philips 5.1 DSP 7500 to Sony Bravia NX720. There is no sound. Also tried connecting to DVD player but TV audio doesnt conenct


... Flat Panel Televisions

Dvd connection we have our direct tv cables hooked up correctly we believe, because we get the signal just fine. When hooking up the A/V cables from the DVD player to the other ports available however, it doesnt pick up the signal after we change the Source on the TV. So basically, everytime we want to watch a dvd, I have to unhook the direct tv a/v cables and hook up the dvd av cables in the same ports. It works just fine then. But we would love to not have to go thru that process everytime.


Check the connection wire for any internal conductor break. Check it with a multimeter. ... Sceptre X400BV-FHD 40 in. LCD TV

When I turn on the T.V. the Sounds works for about thirty seconds then stops but the picture remains the same. Also My DVD Player never has sound, I have tried both HDMI Hookup and AV Cables. I Have


Check and replace its audio output circuit board. ... Flat Panel Televisions

The input dvd screen says no signal and the DVD player doesn't seem to have any power.


If it is in warranty return it---parts for the DVD unit are not available--they would have to replace the entire DVD unit inside the set. ... RCA 32LA30RQD TV

I have lost the manual for my vs45609 and when i am trying to program the remote to work with a philips dvd player i cant get it to work and it also ceases fuction of my remote to the tv if you could tell me how to program my remote so it will fuction with both my tv and dvd that would be great


Here is the manual which has everything you need to know including the codes:http://w ... Mitsubishi VS-45609 TV

The dvd player won't work. Tried the memorex opti cleanser & that played through the steps. Also it will play cds, but just says loading & no disk when try to play a dvd.


The dvd laser is probably faulty. The CD laser is still working. The complete laser unit will need to be replaced. ... Memorex MLTD2622 26 in. LCD TV

Sylvania LC220SS2 connected to dvd player says "no signal". Uses three jacks (red yellow white). Is there a bette way to connect them? Had used a switch that VCR and DVD player shared. It worked fine for a long time. Don't know what changed.


... Sylvania Lc220ss2 TV

Have isolated problem to vhf/uhf connection point. white lines flash in pic. w/a popping sound & if they stay for very long there is a buzzing as in over white or over modulation. problem shows when cable signal is fed direct to tv or thru vcr to tv. other tvs do not exhibit same problem so it's not the cable. have tried other ac outlets & same problem. other inputs; dvd, vcr work fine. cable signal thru vcr tuner fed to ht processor is fine but that is fed via component inputs to tv. sony has b


Hi,Problem seems with main tuner in this tv as other AV inputs working fine so please replace main tuner (TU2) to solve this issue.There are two tuners mounted on A board TU1 and TU2, please replace TU2 and part number would be written on ... Sony KP-53HS30 53" Rear Projection HDTV-Ready Television

I have the samsung LN52A550. When I turn the tv on a blue screen appears. I tried changing the source with the menu button but does not display anything. The TV is about 2 years old. The sound works. When I try a different input(dvd player) same results(althoug I cannot change ths source because the menu does not display). The dvd is attached via a three cable. The directtv is attached via hdmi cable.


Try thisMethod one- with set on, hold down the exit button on the remote for 10 seconds. It will bring up the warning it will reset to the defaults it had when removed from the box and powered up initially. in the warning box it will show the c ... Samsung LN52A550 LCD TV

When trying to use the dvd player, I get the message "No signal". And the remote doesn't work for the dvd player.


... Mintek DTV-173 17 in. TV/DVD Combo

I have a compaq w185q lcd monitor for pc.I have got a tv card with it so i can also watch tv with it.But today while watching tv on it i changed its input signal to something like 1600x..the screen suddenly black out with error message input signal out of range change to 1300 x..like this.and to change the setting i clicked menu from remote but menu doesnt appear so i couldnt reset it.it works fine when i switch to pc side but on tv side i get this error message.what to do please help!


... Flat Panel Televisions

I have a trutech tv with a built-in dvd the dvd is broken but tv worked fine with cable. i had cable turned-off and now ive tried to hook the tv to my sony dvd player, it does not work and when i try to chane channels it wont move from channel 4 can anyone tell me how i may be able to get the trutech tv to work with my sony dvd player?


... TruTech T2000D TV

Scott tv LCT37SHA. The hdmi input doesnt work. It doesnt recognize the signal. Is this a common problem. I tried everything.


I have this same problem as well, While i have not found a true solution i have found a theory as to why. I have 3 hdmi devices to the 1 port. The Xbox 360 hooked up to it works fine, however the dish and the ps3 do not. When run though a switchbox h ... Akai LCT3201AD 32 in. LCD Television

My Sceptre 40 just shows very faint picture..is very dark. Before it showed a faint no signal (from Uverse) I tried from dvd player also faint with no signal


The set may use back lights inside to light the screen which if out will cause this---either the voltage source for the lights or they are not being turned on by the set. This would be the light source for your picture. ... Flat Panel Televisions

I have an older Mitsubishi TV, model VS-50605, that has been giving me problems. I am not able to consistently get a picture and/or sound through cable. All my other inputs work properly. I can play my Xbox on it and my DVD player works fine. Every now and then I get sound but no picture. On the rare occassion I get a picture through cable, it only lasts about 15 minutes at the most and then it cuts off. I've tried switching between ANT-A and ANT-B but had no luck resolving the issue. Any sugges


U have a pay boxes from those Telicoms,cables or satalites compannies?Yes,tries unplug,replug those boxes back about an hour later for it softwares to updates it softwares,should solved this problems or if not trade it in for a new box. ... Mitsubishi VS-50605 50" Rear Projection Television

I have a mitsubishi WS 65711, we were watching a dvd and the tv shut itself off and wont turn back on now. When u press the power put it acts like it will turn on then a second or 2 later will shut itself right back off. The green light doesnt blink or anything. We tried unplugging it for a while then plugging it back in. We also tried resetting it but that didnt work either. Can u give us any possibilities as to what to check for, like a fuse. Or what u think it could be. Thanks for the help.


Hello,It's the problem of overheating in the power supply board of the TV.on the power supply board of the TV there are few capacitors and IC.any of this IC is got short or may be weak.so due to this when you start the TV the current pass ... Flat Panel Televisions

My rca flat screen was working fine than all the sudden it went blank and started flashing unusable signal. I get a picture on a couple of channels but with no volume. I then also get no pic with my dvd player and sound only. Im so confused because I was sitting there watching tv then all then sudden nothing works correctly.


Unplug the set for a while, also a cable or sat box or home receiver and power back each to allow them to try to reboot. ... RCA Flat Panel Televisions

Hi I read an answer about unlocking a DVD player HCT 501U to make it regional free. Something makes me think there is something more. The answered was to a guy who bought the dvd player in USA and tried to watch european dvd's. Conclusion was that this dvd player cannot be unlocked because it is locked at hardware level. However, i bought it in USA and I started using it with european dvd, and it is working well. Now that I tried to use it with US dvd's it says "wrong code". Is this compatible


The "Lock" is firmware not hardware and controlled by the software, (the flag number of the control line from the Disc) situated within the uProcessor in the DVD/CD Player.Trywww.dvdexploder.comfor a list of codes. ... Flat Panel Televisions

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1448 seconds