Having problems with your Flat Panel Televisions ?

White Screen When plugged in yellow standby light turns on but when the power button is pressed the light does not turn blue it just shuts off completely. If repeated the TV will eventually power on BUT goes straight to a White Screen and remains there. Don't know what would cause this so in turn I don't know what to do to fix it. Any ideas?



Answers :

Look for loose contacts in power outlet, input RC cables or such other devices, connect a different input device and see. Switch off TV manually, switch off power outlet, remove plug and cool it off for 48 hours. If problem persists, it might need attention by a qualified service technician.

Repair Help & Product Troubleshooting for Flat Panel Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

White Screen When plugged in yellow standby light turns on but when the power button is pressed the light does not turn blue it just shuts off completely. If repeated the TV will eventually power on BUT goes straight to a White Screen and remains there. Don't know what would cause this so in turn I don't know what to do to fix it. Any ideas?


Look for loose contacts in power outlet, input RC cables or such other devices, connect a different input device and see. Switch off TV manually, switch off power outlet, remove plug and cool it off for 48 hours. If problem persists, it might need ... Polaroid Flat Panel Televisions

I have a insignia 26inch lcd flat screen tvmodel number ns-ltdvd26-09 dvd combo and i turn it on with no other hookups just power cord ..and it powers up goes to blue dvd screen if i dont touch it it will stay on 20 60 seconds then powes off it does it every time ..and some times wont even come on ...and for the few seconds it does the screen is white with fat lines in it ...i look for a blinking diognostics light but have never seen it blink when tv is on stand bye the power light dont blink ..


... Insignia LCDTV26 26 in. Television

Hello my easy touch 42" tv has no picture when turned on the only thing that comes up on the screen is easy touch and the screen just goes blank the tv has the red light on when i plugged the tv in to the mains and when i pressed the power button the blue light comes on and the the easy touch logo comes up on the screen and it it just goes blank the tv itself is a lone tv as my lg smart tv is being repaired i just wanted to know if the tv had to warm up before there is any picture


... Flat Panel Televisions

I have a 47in 3D Vizio TV.. I press the power button and the vizio screen comes up and the vizio light is white.. but after 5 seconds the screen goes black and the light blinks once then turns off. wh


... Vizio E3D470VX 47 in. 3D LCD HDTV

Samsung LN46A550 LCD power on/off problem again. Red light blinks then clicks on and off and then repeats the cycle. Only way to turn off is to unplug the set. When tv has eventually come on after a long time and I turn on my dtv component, I get a picture for like 4 seconds and then the screen goes all green or rainbow vertical lines and the tv starts to cycle on and off again. It will cycle on and off until I turn the dtv component off. Once I do that it will cycle of then onf again and the


It is the Main A/V board that is faulty, not the power supply. The rainbow screen that you are seeing and the searching for signal message before it shuts off confirms this. It is the large board at the center of the tv. If you can get me the part nu ... Samsung LN46A650 46 in. LCD HDTV

Ok when i turn it on the power light comes on for a bit then turns off then comes on then goes off if i keep trying for a long time it eventually comes on. but now my screen is dimmer. colors are off a bit. its not as clear as it use to be its slightly blurry compared to what it use to be.


Your fuse has went bad replace fuse. ... RCA HD52W56 52" Rear Projection HDTV

Mag tv I have a mag tv 32 ' model 3200 that was working perfect then comcast ran some line test and it hasn't turned on since...The light changes from red to blue for the power the screen comes on shows mag then a pop in the speakers and goes right off with a line going through the middle across the screen. I know when a tv cuts off it is going into protection mode. I took the back off and did a look around in the back nothing looks to be burnt, no connectors was loose. Some dust clean


Take a look at photos to see if similar but different in physical size with a plus mark on one side and a minus mark on other side ... Flat Panel Televisions

I have an AOC LCD tv when I hit the power button the light turns blue and then right back to orange, at first it would eventually come on after pressing the power button several dozen times and work fine until it was turned off, now it just goes from orange to blue and back to orange or the light goes out completely. I saw a video that said when it does that it could be the power supply or the main av board, what do you think?


Hi there , sound like it may need output caps replaced in the power supply . ... AOC L26W861 26 in. LCD TV

When I turn on the power button, the Vizio logo turns from orange to white. Then the screen goes from black to blue. But the blue screen only stays on for 1 second, pops twice and the screen goes back to black again. The logo also returns to orange. I already unplugged the TV, reset the power button for a minute.


... Vizio VX32L Television

We have a Hitachi P50S601, Ser # V7L019070, plasma TV. Turned it on and the power indicator light goes from blue to a blinking red light (Stand By Mode). The TV is connected to DIRECTV and if you are fast enough with turning the system on, you will get a picture for about 2 - 3 seconds, then the screen goes black. The power indicator light will go from blue to blinking red. Thank you for the assist.


It have short in some board have to checked by some professional. ... Hitachi Flat Panel Televisions

I turn tv on, the status light flash really fast continous, screen slowly starts to light up . I can see it getting brighter, the introduction screem Mitsubishi Electric Welcome screen displays, green light still flashing and then screen shuts off green light continue to flash for a few second then stops and tv is has shutdown. The process is about 30 to 35 seconds. scince 1/24/11 Tv has been starting up this way, but it would eventually turn on after several attemps. Know on 1/28/11 Tv would no


... Mitsubishi WD-73737 73 in. HD-Ready TV

I have a RCA L26WD26D Flat Screen TV. When you turn it on it will say "please wait". This lasts for 30 seconds or so. Then that goes off and the screen turns black with some sections turning white. It will vary the back and white and will stay like this for maybe 20 minutes. Then it will start showing vertical colored lines. They will change also and eventually turn back to black and white. After leaving the TV on for about 5 or 6 hours, the picture finally shows up and looks fine. So now I'm af


Hi coefremont,\015\012\015\012This is an indication of out-of-regulation in the power supply section. The very\015\012common caused of this fault is the leaky\015\012elec ... RCA L26WD26D 26 in. LCD TV

My Hitachi P50x01au plasma TV screen goes blank suddently, and the power indicator green light blinking. TV cannot be turn off by the remote. I switched off the power manually, and turn it on, but the green light still blinking with a black screen.


... Hitachi Flat Panel Televisions

Hi, can you help me with this TV please. Hi, I have a Olevia 232-T11 LCD TV. First my TV wouldn't turn and the blue light just stayed on. I replaced the power supply board and now my TV turns on and the screen lights up but I get no picture or sound. The slave backlight inverter board has a blue light when you turn the TV on but goes away shortly after. The screen stays on but I have no sound or can't control the channel, volume or source button. Please help.


If the tv is not coming on but there is no picture or sound then it is a 100% guarantee that its a problem with the audio/video main board of the tv. I am sure that replacing the same would resolve the problem. Please get me the part number that is p ... Flat Panel Televisions

I have a magnavox 26md350b which I never really use. I tried to turn it on today and the power light goes on for a second then the standby light and dvd light turn on. The tv does not power on and the two lights just stay on.... Does anyone know whats wrong with my tv?


... Magnavox 26MD350B/F7 26 in. LCD TV/DVD Combo

I have a Gateway p46m103 flat screen television that will only turn on after plugging and unplugging the power cord many times. It would eventually turn on each time I tried this. Now, however, the green power light comes on, and I can hear it is on, but the screen is all black. I even tried pressing the Input button on the front of the television, to see if I had accidentally changed it, and even the icon on the screen will not show, to see if I am seeing the cable box, or the dvd player, etc.


... Gateway PLSM46TV 46 in. Television

47LG50 screen light goes black after about 45 minutes of being on, sound still ok. Turn the tv off and back on and its fine for another 45 mins to an hour. The on/off light goes from red to blue-ish when screen goes black. As a note I took out the power board adn checked the capacitors and none where bulging or burst (someone said maybe they are drying out)...does that sound like the problem of is this an inverter board issue. I just want to change the what might be the most likely issue


Good day!That problem is commonly happens when the inverter board failed.But before you replaced that its better to check this out first.Just follow this simple and D.I.Y procedure on troubleshooting. ... Flat Panel Televisions

When I power on the Haier Tv the red light on the front turns to blue and the screen lights up for about 5 sec then the screen goes dark and light turns to red again. My daughter plugged it in with the wrong plug adapter cord one time. Can you help?


... Haier HL19D2 19 in LCD TV

FLX3211b when plugged in the red power light comes. Then when the TV is turned the red light turns blue and stays on. The Element logo appears for a couple seconds then the screen goes black. There is a red light that is on inside the chasiss. Is it the power supply or main board


The transformer for the backlight is usually what fails on the elements especially if the logo comes up briefly then the screen goes out. I would check the transformers. ... Element Electronics FLX-3211B 32 in. LCD HDTV

Have a lg 20ls7d 20 in.power problem .theres power to the tv.the red light in frontis in .i hit the power button on top green light comes on then blinks 5 times screen cums in or a second then goes off.so does the green light .but the power light in the front wont come back on unless i hit the power button on top again.like i was turning the unit off.any ideas?


... LG RE-20LA70 20 in. Analog TV LCD Television

When turned on, screen goes black, but power light stays green


It sounds that the main digital board to this TV is faulty. Contact any service technician. ... Sanyo LCD-42CA9S VIZON MULTISYSTEM 42" LCD TV 110-220 VOLTS

Samsung LA46A750 - When we turn power on, it automatically goes off and on again. Screen stays black, only the red light power indicator goes on and off. also the red buttons on the right side of the screen, don't seem to work.


... Samsung Flat Panel Televisions

DP46849 Sanyo. I have checked all of fixya for solutions. I hane no sound or screen but have a green light when turned on. It will flash as if it is in protect mode. I have checked voltage and there seems to be 5v, 12v and 15v as indicated on power supply. I cannot find a 24v to read from but I did pull the master inverter to see if I had sound. Still the green light flashes and no sound. I suspect power supply only because when it is turned off I hear a high pitched whistle that slowly goes on


Hi,Power supply board seems defective and causing problem. Please replace power supply board to solve tv issue, required board is available in ... Flat Panel Televisions

I have Hitachi Ultravision model 46UX25K I was watching in the morning then I shut it down properly by remote control, after few hours I try to turn it on, nothing , no picture just dark screen, I can hear light noise from the back of the TV going on and off within seconds but that's all, when I push the power TV button on my remote control I see the power light goes on and off but no picture. Upon removing the back there is a red LED on a circuit board in the back that also goes on and off when


... Projection Televisions

Vizio GV47L...when i turn on the tv, the screen stays black. The vizio light turns white and it makes the click noise like normal but after a minute of it doing nothing the light turns back to amber. I can turn it on and off using my remote. I read other problems where people had to unplug there tv to turn it off. Mine will turn off. Would the problem be the power supply or the motherboard. The slave inverter was making a squeeling noise and i replaced it like 2 months ago.


... Flat Panel Televisions

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.2367 seconds