Having problems with your Flat Panel Televisions ?

Does not turn on with picture. when you first plug in one can hear a relay engage...that's it, no picture or blue light power on indicator. tried the button on the right side of tv, no go. pulled plug and waited for a few minutes, no go.



Answers :

Leave unpluged longer. Capacitors bleed of very slow. atleast a couple hours. if that doesnt help tv may have bad powersupply.

Repair Help & Product Troubleshooting for Flat Panel Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

Does not turn on with picture. when you first plug in one can hear a relay engage...that's it, no picture or blue light power on indicator. tried the button on the right side of tv, no go. pulled plug and waited for a few minutes, no go.


Leave unpluged longer. Capacitors bleed of very slow. atleast a couple hours. if that doesnt help tv may have bad powersupply. ... Pioneer PRO-150FD 60 in. HDTV-Ready Plasma TV

I have a sharp aquos lc-c5277un. Both the power and OPC lights together blink twice. I tried unplugging it, holding down the volume up and channel down buttons while plugging it in. That left me with a solid power light on. I pushed the power button to turn it off and it turned off. Pushed it again to turn it on. It turned on and worked. 10 minutes or so later I heard a pop sound and the lights started blinking as before. This loop has played out three times. Is this the power board or


... Flat Panel Televisions

I have a Panasonic HDTV 1080i. The Tv keeps turning itself off and the power light turns yellow and blinks. If I wait for 5 minutes and press the power button the TV turns back on and sometimes it stays on and sometimes it switches back off. The lamp light does not light up or blink just the power button. Any ideas?


Hi,I am sorry to hear regarding the trouble. However, there are few possibilities that could cause the same issue. If you have electronics repair experience, and wanted to diagnose / repair the set yourself, revert and i would be able to ... Panasonic PT-60LC14 60" Rear Projection HDTV

Trutech plv16320vm tv/monitor, will not come on,when you plug it in you get a red stand by light ,when you press the power on button. it goes off and nothing happens. or after u plug it in and u get red stand by light just wait 2-3 mins and it goes off.. no power. only 1 or 2 years old please help


Are you still having problems with this?Please let me know.Thank You very much!\015\012 Tyler ... TruTech PLV16320 Television

When you turn of the TV the POWER indicator flashes green for several minutes. The TV never comes on. After the several minutes of the POWER indicator flashing green, it stops, I hear a click and the light goes out. Within a few seconds, the LAMP indicator light starts flashing red continuously. I unplugged the TV and waited one hour to remove the lamp. I could not tell if the lamp was blown. I can see the filament, the glass is clear, but there is a 2 cm or less spot in the right upper c


Sounds like the lamp door is not secured in place. Try removing the lamp door and put in back in until it clicks. ... Panasonic PT-52LCX66 Projection Television

My panasonic flat panel tv with model no. TH-L32c20x has a power problem.. i push the manual button on tv side,the red light is on..then second is the remote power,the green light come and blinking 20 times,then turn to red light blinking slowly, the power not goes in, i unplug and plug again,try the same way its not working..


... Panasonic Flat Panel Televisions

I have a Mitsubishi WS-55909 projection TV. There was a power outage and when the power came back on, the TV won.t turn back on again. There is this light (Timer) that keeps on blinking on the front panel of the TV. I tried unplugging the Unit and waited for about 15 to 20 minutes before turning it back on , still won't work. I tried using the original remote for the TV to try to turn the power on, still doesn't work. There is a reset button beside the timer light, and I tried to reset the unit


Unplug,replug the tv back like 24 hrs later.That the whole tv is resetting itself everythings.Tv now should be working again.If still have the same problems,than ur tv DM power supply board is have dying parts,must repair the tv DM power supply board ... Mitsubishi Projection Televisions

TV: Aquos SHARP LC-42BT10U When you plug the unit in, the power light comes on. After a few seconds, you then hear a click. Next, the power and the OCR lights blink simultaneously twice and then the OCR light blinks 3 times. When I put the TV in service mode, The screen gives me a small multi colored band from left to right that will fade after a few minutes. If I turn off the TV and put it back into service mode again, the color band moves to a different place. I am trying to fi


... Sharp LC-42D72U Television

WhaWe have a Panasonic Model TC-P42G25 TV. We were watch the evenings when all of a sudden the tv went out and the red power button was blinking. I thought I heard a snap but an not sure. I unplugged the tv for about 10 minutes plugged it in again, the light was out. When I used the remote to start it. The red light started blinking again. I also noticed that when i plugged it in I you could hear it what i would say energize the circuits. No response other than the blinking red light.


The blink code asked for by another expert would help--but if you heard a pop and the set is out commonly this is the POWER supply board in the set failing--not unusual.Individual parts are not sold for these sets and generally this will be a ... Panasonic TCP42G25 42 in. TV

Vizio VW42L HDTV. I lose audio and video after several minutes but the power light remains on. If I turn power off and on right away, the screen flashes and then nothing. If I wait awhile, I get audio and video for several minutes then the same thing happens. I looked at the power supply board and it doesn't look like any of the caps are bulging.


Please replace power supply board that seems defective and causing problem.Required board would be available in shopjimmy.com ... Flat Panel Televisions

Lg 42lh30 Tv runs well for awhile 20 minutes to an hour, then a click sound comes out of just the right speaker. Then the TV freezes and none of the buttons work on the TV. Once I cycle the main power switch the tv will not turn back on, thought a red light shows that power is available. I did some minor troubleshooting and found when I disconnect the T-Con from the main board, I do not ever get the clicking sound, my buttons always remain functional, and the TV seems to run fine (I can hear the


As per your detailed description, the fault should be of its T'Con itself. Replace it. There is no adjustments to be done after T'Con replacement. If you wish to get more details about how to replace T'Con board to an LCD TV, check the site linked ... Flat Panel Televisions

While plugging in a D.V.D.s connection the unit stopped responding to the remote control or the manual controls under the front panel. It will not respond to anything except pulling the plug out of the power point. There are two lights on the front of the unit: a green one under what looks like a clock symbol and a red light on the right side of that.Any help would be appreciated!


Hello\015\012You haven't specified anything about the device you uses. Without its brand name and model number, how can I powt a solution to you? Please provide these to me by FixYa please. ... Flat Panel Televisions

When I turn my TV on it will turn off by itself in about a minute and the red power light on the front of the TV will blink. The remote control nor the power button on the front of the TV will turn it back on. I have to unplug the TV for a few seconds and plug it back in to make it come on. It usually takes two or more of these unplug and plug back in sessions to get it to stay on. Some times it takes up to fifteen before it will stay on. Please help.


This is what 's happening: you give the command to start the tv so the power source is initiated and starts to deliver power to the rest of the components of the tv; one of these components has aged and it requires much more current than normal to st ... Toshiba TN55V71 55" Rear Projection Television

When trying to turn it on the green light comes on the front, we hear a small zap sound, sounds like it is trying to come on and then the green light goes out... it will do this consecutively three times with one press of the power button. Then you have to wait 2-3 minutes before it will respond to the button press. We have done this for up to a half hour until the tv finally comes on. What is wrong?


Hello,This type of fault can be repair, it could be a short circuit on the panel power board, remove the back cover of the television in this you have to resolder the panel where you can find dry soldering, but if otherwise a common probl ... GE D52GW12 52" Rear Projection HDTV-Ready Television

I have a Sanyo ce32ld33-b, the blue power light on the front stays on but the tv stays off when I press power on the remote or channel on the side the light goes a little dimmer but still nothing, I've turned it off at the plug waited a while but still nothing, cheers


... Flat Panel Televisions

I have A Hitachi 42In Plasma Tv model # 42HDT79 The blue light is blinking continuously and in the back of the set on 5 error code lights the third is lit green the 4th is lit orange screen is lit but no video or audio. Ithink it is probably the main board. I would just like to hear some iodeas or opinions. Also, none of the buttons on the side of the Tv work.The 2nd error code light will occasionally come on and when it comes on the blue power light will stop flashing but then it goes right b


Main board is possible but power supply board should first be tested. ... Hitachi 42HDT79 42 in. Plasma Television

My Mitsubishi WD 60735 blinks the orange light as soon as I plug the power cord in. When I press the rest button the green light flashes for one blink then goes right back to blinking the orange light


... Mitsubishi WD-60735 Projection Television

My flatron m1910a lg monitor /tv will not display anything. it seems to lightly flash the screen but then goes black right away. If I power it off with the power button it seems to want to power itself back on without my help. I have tryied to unplug it and plug it back in. It is now currently working for me but it did the same thing yesterday morning as well. can you suggest anything or need more information


... LG M1910A 19 in. LCD Television

I own a Olevia LCD tv- model number 242-S11. I have had the tv for several years with no problems. As I was watching a show today- it shut down. No picture, no sound, no blue standby light. I flipped the switch on the back of the tv off, unplugged it from the power source and waited several minutes. When I plugged it back in and flipped the switch, i seen the blue standby light flicker on and then back off. Still no picture, sound, lights, nothing. Repeated the switch/plug again, but disco


... Flat Panel Televisions

X322BV-HD*WXC100 Problem: TV will not power up. Red indicator light is evident and turns blue when you use the power button on the remote or the power button on the TV. However nothing else happens. The screen does not light up nor can you turn it back off with the remote or TV button. I tried on several occasions to remove the power cord and plug it back in again with no success. The red indicator light comes back on and turns blue when I use the power button on the remote or the power button


Warranty is usually 1 year parts and labor. Contact mfc for warranty service. likely main board. ... Flat Panel Televisions

X322BV-HD*WXC100 Problem: TV will not power up. Red indicator light is evident and turns blue when you use the power button on the remote or the power button on the TV. However nothing else happens. The screen does not light up nor can you turn it back off with the remote or TV button. I tried on several occasions to remove the power cord and plug it back in again with no success. The red indicator light comes back on and turns blue when I use the power button on the remote or the power button


... Flat Panel Televisions

Push power button, red light comes on for two sec. and then go's off. i've unpluged and plug it back in no change. but when I plug it back in it tries to come on .and right back off again.


... Hitachi 53UWX10B 53" Rear Projection Television

LG 32LB9D Hi there, my name is felix and i just want to ask you for help, i changed already the bad capacipor on my lg 32lb9d but i still having the problem that i has to plug and unplug the power cable couple of time to have sound and picture on my tv or i have to leave it on for several minuts until warm up. could you tell some idea of what to do to fix the problem? thank you for your help. PS. if i desconnect one of the cable locate at the top right hand side and plug it back the picture and


... LG 32LB9D TV

I have a sharp LC-37D40U that will not power on. The power light blinks 1 time every second. I held the input and volume - button while plugging the TV on and the TV cuts on and then cuts right back off, no buzzing sound is heard at all. I believe it is either the lamp or the inverter board by researching this site. How can I test which component is bad or just continue troubleshooting from this point?


OK if you have blinking red light.Try to open the cover then disconnect the inverter board after that try to power it on again..If the light stays in blue (LIT) and of course you don't have picture or backlight you have faulty inverte ... Sharp AQUOS LC-37D40U BACKLIGHT INVERTER BOARD PN: IM3826-1

Samsung LA46A750 - When we turn power on, it automatically goes off and on again. Screen stays black, only the red light power indicator goes on and off. also the red buttons on the right side of the screen, don't seem to work.


... Samsung Flat Panel Televisions

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1550 seconds