Having problems with your Flat Panel Televisions ?

I recently purchased a used Pioneer Pro150FD and was told it worked. Now that I have plugged it in, I get a clicking that the power is on, but there is nothing coming on the screen. I also see a small red light illuminating from within (through the back panel) when the power is switched on. I am using a "osiris" remote that came with it and the control says "PIONR" but the switch doesno't work. I have installed new batteries in the remote. Any thoughts?



Answers :

Repair Help & Product Troubleshooting for Flat Panel Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

I recently purchased a used Pioneer Pro150FD and was told it worked. Now that I have plugged it in, I get a clicking that the power is on, but there is nothing coming on the screen. I also see a small red light illuminating from within (through the back panel) when the power is switched on. I am using a "osiris" remote that came with it and the control says "PIONR" but the switch doesno't work. I have installed new batteries in the remote. Any thoughts?


... Pioneer PRO-150FD 60 in. HDTV-Ready Plasma TV

The controls on the TV and from the remote will not work if they are not used for 20 - 30 minutes. It is not simply a remote issue because the controls on the front TV panel will also not respond. So, we have to turn the TV off and back on again to be able to use it. However, after you press the power button on the remote or on the TV to turn the TV off it takes about 20 seconds for the TV to finally respond and turn off. This issue is not limited to a single source. It occurs when we are wat


I have seen this before--loss of control is usually a microprocessor in the set "confused" and the first thing to do is unplug the set from power for a while and also if used any box providing signalIf that does not help it is a serious issue ... Toshiba 47TL515U 47 3D LCD TV

I have a Mitsubishi WS-55909 projection TV. There was a power outage and when the power came back on, the TV won.t turn back on again. There is this light (Timer) that keeps on blinking on the front panel of the TV. I tried unplugging the Unit and waited for about 15 to 20 minutes before turning it back on , still won't work. I tried using the original remote for the TV to try to turn the power on, still doesn't work. There is a reset button beside the timer light, and I tried to reset the unit


Unplug,replug the tv back like 24 hrs later.That the whole tv is resetting itself everythings.Tv now should be working again.If still have the same problems,than ur tv DM power supply board is have dying parts,must repair the tv DM power supply board ... Mitsubishi Projection Televisions

X322BV-HD*WXC100 Problem: TV will not power up. Red indicator light is evident and turns blue when you use the power button on the remote or the power button on the TV. However nothing else happens. The screen does not light up nor can you turn it back off with the remote or TV button. I tried on several occasions to remove the power cord and plug it back in again with no success. The red indicator light comes back on and turns blue when I use the power button on the remote or the power button


... Flat Panel Televisions

X322BV-HD*WXC100 Problem: TV will not power up. Red indicator light is evident and turns blue when you use the power button on the remote or the power button on the TV. However nothing else happens. The screen does not light up nor can you turn it back off with the remote or TV button. I tried on several occasions to remove the power cord and plug it back in again with no success. The red indicator light comes back on and turns blue when I use the power button on the remote or the power button


Warranty is usually 1 year parts and labor. Contact mfc for warranty service. likely main board. ... Flat Panel Televisions

Have Protron PLTV-3250 TV and I was told the power supply board was bad. All indications concluded this was the problem. Replaced the power supply board (FSP194-3F01 power supply) and turned the TV on. It has power, but I have no picture. I can hear the sound from each channel, but that is it. I can change the different sources using the remote control and when I come back to TV, the picture (white fuzz or blue screen) will flash for a moment, then it goes black. If I select a source that


... Spectroniq PLTV3250 32 in. LCD TV

My kids broke the remote that came with my vizio soundbar, I bought a universal that worked fine for about 6 months and now I can not get a remote to work with my vizio at all. I bought a new remote and it blinked to show it accepted the code but it will not work. My vizio soundbar works if you use the power button the top of it and the volume control, so can you tell me what the problem is?


Hello,The remotes you have purchased and tried, are universal remotes ? For an item like that the default remote that came with it would work best. I would email Vizio customer support and get a replacement. I had to do the same thing abo ... Flat Panel Televisions

Hi im working on an insignia ns-pdp50hd-09 when i hit the power button or use the remote to turn the tv on the indicator led turns blue and everything shuts down not alloing to be turned back off or anything. i had been told this was a power control board issue, i took it to be tested and repaired and it is fine. any other ideas?


... Flat Panel Televisions

I have a lg 32lc5dc that powered off by itself and now when i unplug it or turn it on with the remote the remote no longer works and i have a snowy screen. It will not power off when i plug it back in it just comes right back on, every once in a while it will stay powered off when i plug it back in and the remote will turn it on but then the remote will not do anything else. i have changed the batteries and used the reset button on the back of the tv i dont know what else to do


Hello,It's the problem of overheating in the power supply board of the TV.on the power supply board of the TV there are few capacitors and IC.any of this ic is got short or may be weak.so due to this when you start the TV the current passes fro ... LG 32LC5DC 32 in. LCD HDTV

I have Hitachi Ultravision model 46UX25K I was watching in the morning then I shut it down properly by remote control, after few hours I try to turn it on, nothing , no picture just dark screen, I can hear light noise from the back of the TV going on and off within seconds but that's all, when I push the power TV button on my remote control I see the power light goes on and off but no picture. Upon removing the back there is a red LED on a circuit board in the back that also goes on and off when


... Projection Televisions

HI!!! I just came back from work today and when I turned on my TV through my Direct TV remote control the TV didn't turned on. I tried to do it through the TV's remote control and it didn't work either. I reprogrammed the cable's remote control and did everything I could and is still not working. The TV doesn't work with any of the remote controls. Please help me!!!


Might be a bad IR sensor. Does the button turn the tv on? ... Flat Panel Televisions

I have a 37 inch lcd hd tv made by Curtis model 3717A. I bought the set about 18 months ago. When I attempt to turn the set on either manually or by remote, the on/off light begins flashing but there is no picture. After leaving the set unplugged for several hours I was able to turn the set back on. Since that time I stopped using the tv's on/off, instead just using the cable box. My cat stepped on the power strip yeserday and now the tv will not power back up. Help.


... Flat Panel Televisions

Pioneer PDP-5010FD 50-IN 1080P Plasma HDTV; The power comes on but the screen remains blank and no volume. Able to use MENU and DISPLAY buttons on remote control, as well as change the INPUT channel.


... Pioneer PDP-5010FD 50 in. Plasma HDTV

The original remote control for Teletech TV is blocked. Grandma pressed something and suddenly the remote got stucked on a channel. She thought it is ok to turn off the TV, cause the remote was not answering to any commands. But after she turn the TV back on (pluged-in) the remote was useless. I bought a new remote, compatible with the original one, and the TV is working fine. I guess the remote is somehow blocked. Is there any combination of keys I can use to un-block it? Like get ity back to t


Click here to know more about it. ... Standard (CRT) Televisions

I have a URC 1056 Universal remote Control device which came bundled with a Digital Box (Set top) from Rogers Cable. (Cisco Explorer 8642HD). The Universal Remote should be able to control my DVD player, a Panasonic SC-HT75. With the help of the info at http://www.urcsupport.com/html.php?page_id=382, I identified the code for the DVD Player to be 0703. Now programmed to control the DVD player, the URC can start or stop a DVD from playing, but doesn't seem to be able to Power the DVD p


... Flat Panel Televisions

I have a toshiba tv model: 32AV500U. It would not power on using the remote control so I bought a new original remote: CT-90275, and still it will not power on from the remote. Can you please help me fix this problem. Please advice. Thank you very much.


... Toshiba 32AV500U 32 in. LCD HDTV

While watching a dvd on the Q2035a I was using a seperate dvd player and I use a universal remote for both the dvd player and Q2035a. I began to adjust settings for the dvd player using the univ. remote. I noticed that I was in Tv mode instead of dvd mode and then the tv just went of all by itsself. The manual power button no longer works on the Q2035a. I unpluged the tv and pluged it back in and the tv automatically turned on to a black screen but you can hear it as being on and the green led


Hello, It sounds like when you pressed the remote you inadvertently changed the scan on the ctv. This can cause the ctv ( colour tv ) to change from say ntsc to pal or similar. Even a reset button wouldnt help as it sounds like it is within the setu ... Flat Panel Televisions

When I turn my TV on it will turn off by itself in about a minute and the red power light on the front of the TV will blink. The remote control nor the power button on the front of the TV will turn it back on. I have to unplug the TV for a few seconds and plug it back in to make it come on. It usually takes two or more of these unplug and plug back in sessions to get it to stay on. Some times it takes up to fifteen before it will stay on. Please help.


This is what 's happening: you give the command to start the tv so the power source is initiated and starts to deliver power to the rest of the components of the tv; one of these components has aged and it requires much more current than normal to st ... Toshiba TN55V71 55" Rear Projection Television

My UNIVERSAL REMOTE (from shaw cable company) won't respond to my TV: LG 32LG30 . Got another universal remote, same problem. Can't use power button or volume on the UNIVERSAL remote but it will change channels through the digital box but nothing else will work. Have sought help from shaw to program remote to no avail. Is this a common problem with remotes? The remote that came with the TV doesn't work either. According to the shaw service this TV remote should turn the TV on &


... LG 32LG30 32 in. LCD HDTV

I have a LC-60LE64OU LED TV - connected it and programmed the Direct TV remote to turn off the TV. Everything seems to work fine until you turn off the TV. The Direct TV receiver resets every time that the TV is turned off (the Direct TV receiver shuts off as well). Even if I use the TV remote and only power off the TV, the Direct TV receiver powers off and then resets when I turn the TV back on (meaning that it takes at least 10 minutes to cycle through every time the TV is turned on). Plea


... Sharp LC-60LE640U Aquos 60" Class 1080p Edge-Lit LED HDTV with 120Hz,

The power went out for a few days due to inclement weather. When the power came back on the volume and channel buttons did not work on the TV itself and the remote no longer does anything, Tried to recode satellite remote also nothing. Is this fixable.


Sounds like the main board has an issue. I would try replaceing the main board. You can get a replacement main board from www.tvcircuitboards.com ... Flat Panel Televisions

My Sharp Aquos LC-60LE847U lcd TV has some kind of controller issues. At times when we turn the set on using the remote, the indicator light will light but the TV never has sound or picture. It never "turns on". Then when you try to turn the power off, neither the remote nor the manual switch on the set does anything. If you fiddle with the power enough, the indicator light on the bottom bezel of the set will start flashing 3 blinks then one blink and keep repeating that. Unplugging the set


... Sharp Aquos Flat Panel Televisions

The blue power light is on. When i use my remote either the one that came with the tv or mt satilite remote to power on the tv. The blue light stays on, and nothing happens. It appeares to be stuck in stand by mode. My model is a 237 -t12 hd ready


There's a good chance you have failing electrolytic capacitors either in the power section or the inverter section or both.Any caps in these sections that look bulged at the top, or bulged/leaking at the bottom need to be replaced.If you ... Olevia LT37HV 37 in. HD-Ready LCD Television

LE42EC04A My wife left a show on before we left for a movie, we have owned the TV for about two years. Never been dropped and never had any situations with the Television. When we got back the TV wasn't working at all and our babysitter said it just turned off...When you turn the TV on using the power switch the LED's on the front display near the volume/channel controls isn't defaulting to RED (OFF). The LED is staying solid (BLUE) and always on. We know the power control board (168P-P47T4K-20)


... Hitachi 42HDT51 42 in. Plasma SLC1551AW

Using a replacement remote control, and during channel surfing closed captioning came on. Now I can't get it to go off. Have tried using replacement remote's menu button, but can't access the setup menu. Any suggestions? Thanks in advance!


... Sansui CDVD1300W 13 in. TV/DVD Combo

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1610 seconds