Having problems with your Flat Panel Televisions ?

I have just re-installed my pdp5071 after it being in storage for a few years.. the unit will not power up . at plug-in several clicks at upper left rear of unit ( click - stand by red light on-off, pause then click blue power light on, click blue power light out, pause click, click ) unit then is dead .. i have tried the unplug reset operation several hundered times same result. i have tried the mechanical power button a few hunderd times - randomely at plug-in i get a single click and red stan



Answers :

There are two power buttons on this TV. One on the lower left front and one on the right side. make sure they are both on. During storage it may have deactivated both of them.

Repair Help & Product Troubleshooting for Flat Panel Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

I have just re-installed my pdp5071 after it being in storage for a few years.. the unit will not power up . at plug-in several clicks at upper left rear of unit ( click - stand by red light on-off, pause then click blue power light on, click blue power light out, pause click, click ) unit then is dead .. i have tried the unplug reset operation several hundered times same result. i have tried the mechanical power button a few hunderd times - randomely at plug-in i get a single click and red stan


There are two power buttons on this TV. One on the lower left front and one on the right side. make sure they are both on. During storage it may have deactivated both of them. ... Pioneer PDP-5071HD 50 in. Plasma HDTV

Blinking red Red light blinks 14 times. Unplugged from surge protector box, waited several hours and replugged. Red light still blinks 14 times. So I unplugged it and plugged directly into an outlet. TV clicked when I hit power and red light is on and steady. Will not turn green, still no sound or picture.


What is the brand name to your TV? Provide more details please. If you wish to get more details, surf this link.\012http://electronicshelponline.blogspot.com/\0 ... Flat Panel Televisions

Model:Philips 42PF9965 Plasma At switch on the green light comes on for a few seconds,then it goes off and the red light starts flshing.After several attempts the tv may come on live and stay on until you switch off.The two relays on the power supply board heard to be clicking on and off during the time the red light is flashing


You might have some swollen capacitors on your power supply board. They will be easy to spot out, because they will not have flat tops like the rest of the capacitors. Replace them with the same rating cap ... Philips 42FD9954 42 in. Plasma HDTV

Pioneer plasma TV. When I power on the red power turns blue, as it should. But then I hear a second "click" and the actual tv never powers up. The blue light will then blink thirteen times over and


If you know electronic repair, what you can do is trouble shooting. you will need to check weather the output voltages from the power supply going to the sustain board doesn't drop or need adjustment. ... Flat Panel Televisions

X322BV-HD*WXC100 Problem: TV will not power up. Red indicator light is evident and turns blue when you use the power button on the remote or the power button on the TV. However nothing else happens. The screen does not light up nor can you turn it back off with the remote or TV button. I tried on several occasions to remove the power cord and plug it back in again with no success. The red indicator light comes back on and turns blue when I use the power button on the remote or the power button


Warranty is usually 1 year parts and labor. Contact mfc for warranty service. likely main board. ... Flat Panel Televisions

X322BV-HD*WXC100 Problem: TV will not power up. Red indicator light is evident and turns blue when you use the power button on the remote or the power button on the TV. However nothing else happens. The screen does not light up nor can you turn it back off with the remote or TV button. I tried on several occasions to remove the power cord and plug it back in again with no success. The red indicator light comes back on and turns blue when I use the power button on the remote or the power button


... Flat Panel Televisions

Vpw 425 viewsonic, have owned this Plasma, for several years, has always operated fine. Today it won't turn on. Main power switch is on. Standby switch is red. When I push the standby power button, it changes from red to green, I hear a click, then within 2-3 seconds the standby light turns back to red. I removed the back panel and tried to start again, after several tries there is a red indicator light (inside the panel) labeled "main power" that comes on and stays on.


... ViewSonic VPW425 42 in. Plasma HDTV

I have a Panasonic TH50PZ77U plasma. (1) recently the unit would power off, without warning. (2) The power light blinked several times two nights ago, but finally came on. (3) Last night, no power light on the front of the unit, and it will not turn on. The unit is plugged into a surge protector and all other components plugged in are operating correctly. I have read through several forums on similar Panasonic models, and a "power supply" failure seems to be way to common.


Its probably the main filter capacitor thats gone on the power supply, (sorry for mentioning power supply again but it is actually a power supply problem) If you are good at soldering then you can replace yourself, Google Panasonic capacitors and th ... Panasonic TH-50PZ77U 50" Class Plasma HDTV

This TV has a light bar on the front that is red when off and blue when on. When we attempt to power the TV on the light will momentarily light blue, then turn red and the TV won't power up. It varies how many times we have to hit the power button before it powers on and stays on. I suspect there is a bad "starter" or capacitor, but don't know how much needs to be replaced internally to repair this problem


... Audiovox FPE3706 37 in. HDTV LCD Television

LG 47LG50 dead....no red light, no blue light, no green light. It made a CLICK sound and went dead. Power Supply?


May be power supply need more information ... LG 47LG50 47 in. LCD HDTV

Hi I have a TH50PZ80U that is flashing two red lights when I plug it in. If i press the power button for 5 seconeds it will flash 10 times. When applying power the AC relays click, after pressing the power button the fans turn on and the optical audio port is red. It will stay 'on' for 3 seconds and then the relays will click on turn off. No red optical light. If I test the P25 connector pin 1 voltage it will go to 15 Volts for about a seconed and then 0. This is only achieved by plugg


I'm 100% confident that a D-board replacement will fix this issue. I've worked on 8 of these and a D-board replacement fixed the issue you are having now. I had all the same problems with them but it is all related to the D-board (from previous exper ... Flat Panel Televisions

I have a Magnavox 20MF251W/37 that when I plug it in it turns on to the standby mode (red power light). When I power it on with remote or by pressing power button it does turn on (blue power light). Shortly thereafter, I do see an image (snow at this point since I don't have it plugged to any video source). However, that image stays on the screen for only 1 second then disappears. The unit is staying on and is NOT going back into standby mode (power lights stays blue). I have replaced main


Hi tempcheck,\015\012\015\012Lot of brand have a common symptom when there's a malfunction in inverter board, it will automatically shuts down the unit. This is because there is a protection circuit designed connected from this board to the mai ... Philips Flat Panel Televisions

Hello, i have a samsung 42' plasma tv model #pn42c450b1d. the tv doesn't want to turn on. i plug it in and you hear a clicking noise se a red power light. also when you press the power button on the tv in the back u see a green light come on for a second on one of the circuit bords( the one under the power board) and simutanously you see a red light come on and and off at the same time on the circiut board with the av, hdmi, inputs. i looked and thier doesn't seem to be any bulging capaciters. a


Hi.As you know the TV is in protect mode because an internal fault has been detected. I think that you already tried leaving power cable disconnected for ten minutes. After connecting back restart the TV with no device attache ... Flat Panel Televisions

Flashing light The green power flashes several time then the power light flashes green, Temp indicator light flashes red and lamp indicator flashes red in order over and over.


... Hitachi 50V720 Television

I have an AOC LCD tv when I hit the power button the light turns blue and then right back to orange, at first it would eventually come on after pressing the power button several dozen times and work fine until it was turned off, now it just goes from orange to blue and back to orange or the light goes out completely. I saw a video that said when it does that it could be the power supply or the main av board, what do you think?


Hi there , sound like it may need output caps replaced in the power supply . ... AOC L26W861 26 in. LCD TV

Have a lg 20ls7d 20 in.power problem .theres power to the tv.the red light in frontis in .i hit the power button on top green light comes on then blinks 5 times screen cums in or a second then goes off.so does the green light .but the power light in the front wont come back on unless i hit the power button on top again.like i was turning the unit off.any ideas?


... LG RE-20LA70 20 in. Analog TV LCD Television

I have Samsung UN46B8000XFXZA LED TV. After power surge it will not come on. Plugging it in causes the blue power up light to come on for one second. The relay on the power supply (BN44-00270A) begins to click. The screen does not come on. All appears dead except for the clicking of the relay on the PS board ever few seconds.rnIf I unplug the connector from the power supply to the Main Unit Board (BN94-02661E) and apply 110v, the screen backlight comes on and there is no relay clicking. (


Yes based on your testing it appears that the power supply is at fault solely and you can opt to attempt a repair or replace it altogether. Unfortunately you will not be certain that the main board does not also need to be replaced until you have rep ... Samsung Flat Panel Televisions

I have a Sylvania LC195SLX TV that when I try to power on the "power on" light (green light) flashes several times and then the tv just goes back to the "stand by" light (red light). The tv will not power on. Any ideas what this could be and if the tv is worth repairing? The tv is less than a year old, but I cannot find the purchase receipt for a free replacement from Sylvania.


The power supply is down . Sylvania power is very simple went you take the back off you should see the two bad capsitators on the board.Just replace them with same value . ... Funai LC195SLX 19 in LCD TV

I have a Panasonic TH-42PV 500A plasma the when you turn on there is a click the fans turn on then nothing for a few seconds and the the relay on the power supply clicks and the the power red led light flashes 7 times stops and then 7 times. What error is this??? Please help


... Flat Panel Televisions

I have a panasonic th-42px70ba tv with the red light flashing 10 times after power button pressed, it clicks 3 times and the fault code start reading on the standby light. I have replaced the main power board and fault still there, any sugestions or a way I can diagnose the fault.


... Flat Panel Televisions

I have a panasonic th-42px70ba tv with the red light flashing 10 times after power button pressed, it clicks 3 times and the fault code start reading on the standby light. I have replaced the main power board and fault still there, any sugestions or a way I can diagnose the fault.


... Flat Panel Televisions

Magnavox 32MD350B/F7 On/Off keeps cycling. When pluging in the ac power the green light flashs then goes to red stand-by and back to a steady green light and then the whole cycle is repeated again no picture or sound. Cannot turn unit off at this time. After many times unplugging the power in and out, I may get it to turn on with a good picture and sound.


... SNK Magnavox 32MD357B_37 32 in. LCD HDTV/DVD Combo

When you turn of the TV the POWER indicator flashes green for several minutes. The TV never comes on. After the several minutes of the POWER indicator flashing green, it stops, I hear a click and the light goes out. Within a few seconds, the LAMP indicator light starts flashing red continuously. I unplugged the TV and waited one hour to remove the lamp. I could not tell if the lamp was blown. I can see the filament, the glass is clear, but there is a 2 cm or less spot in the right upper c


Sounds like the lamp door is not secured in place. Try removing the lamp door and put in back in until it clicks. ... Panasonic PT-52LCX66 Projection Television

Toshiba model 42hp66 Plasma flat screen Problem No picture or sound. Pushing on button 2 clicks are heard A slight hum is heard at the Z SUS board. Green power light is on (power light is red when unit is off) Slight clicking sound from Y SUS board. Now that I replaced the open Fuse. (Fuse 4AH250VP Found open on Y SUS board as looking at rear the Fuse on the left). Still no operation?


Do you still have the clicking noise? The tv turns on but no response issue is associated with the main A/V board 99% of the times if there is no clicking sound ... Toshiba 42HP66 42 in. LCD Television

My Hitachi L42VC04UB replaced a failed power board .The television comes on and after a short time it shuts down and the standby light in the front of the television flashes blue and red .This happe


Well either the TV's main (or other) board overloads the power board and it shuts itself off or the power board itself shuts itself off for whatever reason or the main board shuts off for whatever reason.With the setup you have I'd say it's p ... Flat Panel Televisions

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1484 seconds