Having problems with your Flat Panel Televisions ?

My Pioneer PDP-5060HD has suddenly quit showing the HDMI picture. The TV menus and dialog still show on the TV. When I connect my Apple TV it says I have an HCDP error. A Pioneer Authorized repair place says the main logic board is bad. I see a bunch of Pioneer parts online. So 1, is the repair guy correct? and 2. what would the part number be so I can buy one! Thanks

Answers :

Repair Help & Product Troubleshooting for Flat Panel Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

My Pioneer PDP-5060HD has suddenly quit showing the HDMI picture. The TV menus and dialog still show on the TV. When I connect my Apple TV it says I have an HCDP error. A Pioneer Authorized repair place says the main logic board is bad. I see a bunch of Pioneer parts online. So 1, is the repair guy correct? and 2. what would the part number be so I can buy one! Thanks

... Pioneer PDP-5060HD 50 in. Plasma Television

I have a vizio vp50 hdtv20a. A while back we turned it on no picture and it started to smoke. After reading a little about it I decided to take off back panel and see if I could locate burnt part. Could not locate burnt part so repair man came and we plugged in set with back off and turned set on. Resisters on y main board started to get red and start to smoke. So we figured it was a bad y main board. Repair man said he would order part and get back with us in couple days. Three weeks later

That board directly connects to the display panel---you may have a bad display panel which if is the case is fatal---panel alone will cost more than the set did when new----seen this before in the shop where I repair sets. ... Samsung Flat Panel Televisions

I have a 42PA30RQ RCA Plasma = Has sound , no picture, makes clicking noise when I turn the set on. I changed the main supply board, av board, logic board y sustain and x board. Still no picture, just clicking and sound. Did not see any bad capacitors.

... Flat Panel Televisions

Hi, I have the panasonic TH-42PX60U with the LED blinking 10 times over and over and you said that the H or the PA board may be bad can the P board be bad the board had a bad fuse and repaired that and did nit help. Another guy said I was the DG board (Main Board) what do you think about that?

It may be time to either give up or have a shop look at it--guessing which board is bad, buying and installing it can be futile. ... Panasonic Flat Panel Televisions

First off like to say thanks too everyone thats helps out,great job!! Received this tv with cracked screen,worked fine just bad screen.Ordered screen and installed,now when powered up,screen flickers a few times and goes blank.Can unplug for few mins. does the same thing.Has sound.Dont see any bad caps.Did notice when first turned on heard a low crackeling sound by the board at top center,think its called t-con,little square board 5x7

Its a bad t-con, or different t-con for new panel ... Vizio VW37L 37 in. LCD HDTV

SAMSUNG PCB NO. LJ41-09423A REV. NO R1.4 MAIN BOARD can this board be repaired my tv will not light up this is the part what goes bad on this is it a bad cap.?

... Flat Panel Televisions

I have an Akai PDP5016H television recently it will not power on , I have to push power button several times before it comes on , no picture and no sound , Occasional lly it will stay on with the AKAI logo blue screen and then the screen will change to gray or scramble gray. On the upper right corner it it will say" AIR 8" and at the bottom right corner it will say " fill screen" I looked at the power supply for any bad caps but did not see any visibly. I even check the power supply board f

There's a good chance you have failing electrolytic capacitors either in the power section or the inverter section or both.Any caps in these sections that look bulged at the top, or bulged/leaking at the bottom need to be replaced, and in your ... Samsung Flat Panel Televisions

Bought a samsung 42' 4000 series tv, its less than 2 years old & the picture went bad looks worse than a really old tube tv watching an old VHS. contacted samsung-they don't care, referred me to a tv repair place (75$ to look at it) who said it needs a new sustain board, will cost 300.00 anyone else hear of this problem? anyway I can do it myself? where can I get a sustain board? why is samsung alienating their customers?

Why won't the Samsung Authorised Dealer repair the board? It's not that difficult!There will be a power fault and the picture is not "building" properly. At worst it will be one of the memory chips.With a reflo soldering machine, no probl ... Samsung LN-S4041D 40 in. LCD HDTV

Technika lcd40-920 My tv has switched its self off and wont switch back on again although the standby button is still on (was flashing but now on with no flashing) ive tryed turing it on with the remote and using the touch buttons on the side and turning the mains off for 10mins to see if it resets or something but still nothing. Please help. I really dont want to have to buy ANOTHER TV! GRR! Ive done my research and what ive seen is people saying its the board with the hdmi etc and theres no po

Thissounds like a very common issue.If set is hard to turn on (takes several tries)but will eventually turn on hereis what my guess would be.Every set has a standby p ... Flat Panel Televisions

I have a samsung lcd tv model LNS-4095DX/XAA. I am getting snowy particles throughout the image. The picture looks great except for the pixel looking particles throughout the screen. I have already replaced the power supply due to some bad capacitors. It was alot worse before the new part. Do you think it is the T-Con or main board that needs replacing? I checked all the connections and tried different cables to see if it got better, it did not.

... Samsung LN-S4095D 40 in. LCD HDTV

I have a Vizio VP322 that doesn't work, Only the logo lights up when you turn it on. I have read JFRANDUBE's repair directions about he caps. I dont see and apparent caps. Howevere I checked the resistance between the metal cap body and the board ground. Some have measurable resistance to ground, most do not. Are the ones with resistance to ground bad? The most difinate ones in questoion are C234 and C105. Gordy

Hi Gaker,\015\012\015\012This symptom indicated of drop/missing of output voltages in the power supply section. You must check each output voltages in that section feeding the main board and other board to pinpoint where the fault came from and ... Flat Panel Televisions

Tv turns on with solid green light for about 4 seconds and then shuts down. Can hear relay working correctly. Checking error codes I get "21" 5 times - xray protection circuit. Have opened back and see no visible signs of damage on main board. No leaky electrolytics or burns. No bad smell.rn Have all service manuals

"21" 5 times - xray protection circuit is activated for some reason. ... Mitsubishi Projection Televisions

Horizontal lines My tv have horizontal lines from 3/4 down to the bottom and once its on the tv clears up and then plays good as long as its on once turn off it goes back fuzzy and snowy like i change main and t con board i really dont see anything wrong with the power supply but then again i also read that it could be the lcd panel thats bad

It sounds that the main power supply regulator board has the fault. Replace all the large electrolytic capacitors on that circuit board, or replace it with a new board as card basis. ... RCA L32HD41 LCD TV

I have here sharp lc-42b45u for customer when u turn on the picture is great suddenly u see the picture getting dark then normal very fast like blinking dark and normal after while it will go all dark then come back and when it get hot it will work good u think the main digital board is bad or the inverter what else

Whn the picture going dark is happening, do you still have sound? It does sound like a backlight inverter issue to me. But lets confirm first ... Flat Panel Televisions

No picture I have replace logic main board and y main board but it remain into standby when it does not show that the is remote interference and I plunge out the logic main board from the power supply it gives sound and I can change channel.

... Samsung PS42B430 42 in. Plasma TV

Hannspree inverter board is suspected bad it is a CPT 370WA03S If this board is bad what is likely to be wrong with it can i repair it ? there are some black oblong blocks presume these are the balla

... Hannspree Flat Panel Televisions

Vizio vp422hd tv10a 4amp fuse blows on power supply only when i plug in j11 connector from main board (board with all the tv imput selections) other wirigng disconnected from main board. Is the main board bad or am i missing something?

... Vizio VP422 42 in. Plasma TV

How to get to logic board on Zinth Z50PX2D TV

... Zenith Z50PX2D 50 in. Plasma HDTV

Main Board? Had issues for years, where I had to unplug once in order to get the tv to turn on. Then one day, it would not turn on. The TV shows a quick lightening of the screen like it is going to turn on, but nothing appears. It also clicks once or twice. Took to a repair shop and they diagnosed with main board failure and refused to fix due to lack of parts. Do you think it is the main board and where would I find one? I am pretty handy, do you think I could DIYthis job?

The fault must be due to a main board fault. Generally, it will be impossible to get this board repaired. A replacement must be done. Most of the parts in this board are not available by local electronic spare part market. After power ON, there sh ... Proscan 47LB45H 47 in. LCD TV

I have a Vizio TV VO320E model that I bought with a bad image problem. I have sound and it responds to the remote. The image is white with vertical lines that move across the screen. The T-con board is attached to the LCD panel, it is a small card measuring 1 "x 16", Two flat cable going to the LCD. I do not know if the problem comes from the main board or the T-con board (attached to the LCD)? There are several main board for sale on Ebay. Can you help me determine which one is failing.

Hi.based on my experience in repairing LCD TV's according to what you describe the problem must be on the T-con board however do first some re soldering on the t-con board and re tighten all the connectors on it.A loose cable connectors could result ... Flat Panel Televisions

I have sound and no video. I can control everything. I checked voltages but its saying either main smps or main board. how can I determine which one it is. The fan on the main board does not turn on at all. please help

Hi,\015\012\015\012I have read your comment and I know you have a copy of the supplied service manual of your model no. On page 43 (right guide for your symptoms) stated there that proper testing of CN809 is while it is disconnected from ... Samsung HP-R5052 50 in. Plasma HDTV

I have a LG37LF65 LCD TV. Several month ago it broke down, at that time power supply was repaired. After a while after switching it on picture started to shake and then totally disintegrated. I have taken it back to service they said this is main board failure but since I cannot find proper board. Is It sure that is main board fault or can it be anyithing else? Can I check anything to be sure?

Check the power supply voltages to make sure you don't have another capacitor going out (the first one replaced is probably OK). Poor filtering on a supply voltage could cause the main board to misbehave. If the voltages are good, the shop tech is ve ... Flat Panel Televisions

SAMSUNG 46" LCD : How do you determine which board is bad? I know what I'm looking at and for. I'm not seeing any bulging bulbs / bad caps / burnt or blown areas on the board. Which board do I re-order?

Hello Jon,Before you start ordering and swapping parts check with Samsung, that model is covered under the terms of the class action lawsuit settlement over bad power supply boards. The power supply boards cause the exact symptoms that you ar ... Samsung LN40A450 LCD TV

I have a 50 inch philips plasma 50pf9956. The blue light comes on but I have no picture. The green leds are on steady. I have already replaced y-sus board and main logic board. Any suggestions? Is it main supply board (backlight interver)? Thanks for any help.

... Philips 50PF9956 50 in. HD-Ready Plasma Television

Sound only making popping noice, to to Tv repair shot, said sound board bad and no parts available, The tv came in my 2009 RV cant be that old

HelloSome parts may be not available to this section. The technician who told will be true. He may have asked this amount to repalce the sound card. ... Jensen Standard (CRT) Televisions

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0979 seconds