Having problems with your Flat Panel Televisions ?

Pioneer PDP-5010FD 50-IN 1080P Plasma HDTV; The power comes on but the screen remains blank and no volume. Able to use MENU and DISPLAY buttons on remote control, as well as change the INPUT channel.


\015 7/8/12\012Just noticed there was an issue last night. Last night, the screen and volume finally did come on, not sure how long the power was on before the screren/volume worked. I thought there was a button on the control that finally got it to work. \012Now this morning, tv power comes on but no screen/volume.\012Able to read menu when press MENU button on remote.\012Did not see a solution that resembled this problem.\012Once it came on last night, it worked fine. \012Any ideas?\015

Answers :

Repair Help & Product Troubleshooting for Flat Panel Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

Pioneer PDP-5010FD 50-IN 1080P Plasma HDTV; The power comes on but the screen remains blank and no volume. Able to use MENU and DISPLAY buttons on remote control, as well as change the INPUT channel.


... Pioneer PDP-5010FD 50 in. Plasma HDTV

I have Aiwa TV MODEL No. TV-A209 The problem that I am suddenly facing is that I can't change channels or volume or use any other function. I can't even turn it off with remote control. Its stuck randomly on a particular channel that I was watching at that point of time. Along with that channel it now shows a message in flashing red color that reads :- AGING 0211H Now when I press ''Display'' button on remote control volume goes off and this code is shown :- S123 K234 Y 000 001 1


... Flat Panel Televisions

Menu controls I have a 22" Luxor 22-860-cob television. Recently when I turned my Xbox on, the screen displayed in black and white. I have had this issue before and managed to deal with it by changing the PAL settings in the TV menu. However since then I have broken the Luxor remote and I am using a top up tv remote instead. When I am trying to change the PAL settings this time, I can access the menu but cannot scroll through it or change the settings. Is there a way I can control the menu using


Can please help ive a 32 luxor tv which has lost vol and need reseting to get vol working but not got pin number ... Flat Panel Televisions

I Have a Samsung TV Model#LN40B500P3FXZA, Version SQ01 the volume is at 100% and can not be changed using the remote or the volume control button on the TV. In fact, the remote can not control anything and the volume control button on the TV will sometimes change the channel. Ive tried unplugging the TV and restarting it after an hour but this does not work. Please help. Thanks


Check its front panel switches for damage. If any one among them has got strucked, this type of fault can occur. ... Samsung TXN1430F 14" TV

I have an NEC NLT-40HDB2 with some odd issues, the input (changing to hdmi/ avi) and channel up buttons don't work even when using a logitech universal remote, the buttons on the side of the set d


... NEC Flat Panel Televisions

Justght rcrn03br universal remote to operate my rca model 46la45rq lcd t.v. The code list came with i tried every code and tried brand search and auto program. All i can do is turn on my tv and change channel and turn up the volume. But can not use the menu key or pip or input buttons is there a easy way to get the code for my specific tv thanks.


... Flat Panel Televisions

Remote sensor on tv not responding I,have to turn on tv manually. change input manually,tv reception is ok. Volume cannot be controlled,it will lock in at full volume or drift back & forth,mostley full volume. If I use volume buttons on tv , it changes input (video 1 pc hdmi & so on) Once in a while setup screen will appear then disappear. I have changed batteries in the remote, I don't believe this is the problem.When tv is first turned on the volume icon at bottom off screen will go from 0-60


Have you checked your remote to see if its working? If you have a digital camera or camera phone, point the remote at the lense and see if it shows up on camera screen. If it is working then the IR sensor on the tv could be bad. ... Sylvania LC420SS8 LCD TV

I have a 19 inch toshiba tv 19A21 but no remote for it. I'm trying to hook up a dvd player to it to play through the tv. All the cables are set up correctly, but I can't find the input channel on the tv that will let me play it. I read the manual for this tv and it says you use the remote to access the input screen, but I do not have a remote. Is there a way to do it through the buttons on the tv? Pressing the volume buttons at the same time got me to a menu screen but I didn't see an optio


Most analog tv,u just reqiure pushing the tv manual button channel up a few times,tv will go into video modes like 1 or 2 for play video devices.If this doen't work,try website like Remotes.com to buy an original remote. ... Toshiba 19A21 19" TV

The remote doesnt work with the tv at all. and when i try to change the channel manually with the button it says no input availiable. but the volume button works just the channel button that doesnt. I trried hitting menu on the remote nothing works


UNPLUG THE SET FOR A WHILE AND PLUG IT BACK IN TO SEE IF IT WILL REBOOT-sounds like a microprocessor problem and could have been caused by a power outage etc. ... Sharp Aquos LC-42D62U 42 in. LCD HDTV

Not all of the buttons on my remote for my Celestial G6C52H-C1 work and I have accidently selected panal lock on the tv. Now I can't use the buttons on my tv and the broken buttons on my remote wont allow me to scroll down the menu to unlock it. Please help because I can only watch a few channels and that is it. I can't even change volume or put it on av to watch a DVD. The enter button on the remote doesn't work either. Thank you. Liz.


... Flat Panel Televisions

Well here is the problem I have Hitachi rear projection TV model # 50EX12BA V5K02256 the TV turns on and changes channels. When I go to the menu items (to program the channels for example) via the remote. None of the menu options work. the remote works I can scroll to and select an option and press the enter button (as per the manual instructions) but nothing happens. Is there a way to do a hard reset to return the tv back to factory settings?


Looking for a RF in cable for model 50EX12BA ... Hitachi 57F500 57" Rear Projection HDTV-Ready Television

Using a replacement remote control, and during channel surfing closed captioning came on. Now I can't get it to go off. Have tried using replacement remote's menu button, but can't access the setup menu. Any suggestions? Thanks in advance!


... Sansui CDVD1300W 13 in. TV/DVD Combo

Emerson LC320EM1 changes the input everytime I try to change the channels. It does not matter if I am using the remote or if I use the panel buttons on the set itself.


... Emerson Flat Panel Televisions

I have Aiwa TV MODEL No. TV-A219 The problem that I am suddenly facing is that I can't change channels or volume or use any other function. I can't even turn it off with remote control. Its


HelloCheck your remote control hanset for proper functioning. Get into this link to know more about the faults and repair to remote contorls.htt ... Aiwa TV-S2011 20"

Picture I was litening to music threw direct box,vacumming,different outlet then tv. turned it off,& used converter box buttons to change channel. got no pic no sound. pushed more buttons,turned it off, then on hit reset, pulled card out put it back,then turned around to get remote, and saw my 82 yr. old dad holding remote as far out as he could,as if he was trying to get around me! I asked him what button he pushed & he said none. now we have sound no pic. it turns on deep blue screen no menu


I assumes that there is a confused memory IC inside, due to improper data inputs. Try a hard reset to this set. Unplug it from AC mains wall socket, and re-plug it back after 10 minutes of so. This must make it a hard reset. If it do not help you ... Samsung 50 in. Plasma TV

I can only change channels using the up & down keys on the remote button. But if i press the channel number, eg. Channel 17, if i press 1 and 7 on the remote button, it will not change channels. O


U have to press the enter button after entering the channel number ... Standard (CRT) Televisions

I have programmed my remote to an older JVC television. everything works, but i cannot change the input from the remote. I have a ps3 hooked to the tv. anytime i want to play my ps3 i have to manually press the menu button like a million times until i finally find the input option. is there a way to get the input button working? or at least find input in the menu? the menu button works on the remote.


If the tv has an input button on the side it should let you scroll through all the inputs without having to go through the menu. Hope this helps. ... Flat Panel Televisions

The past week the memory stick menu flickers or stays on for secs and now is on one half the time. If I change a channel or press the memory stick button, it will correct itself for a while and then return to the menu once again. I do not have a reset button on my remote, but I have unplugged the set overnight without benefit. I have never used a memory stick either. Any ideas?


... Sony FD Trinitron KD-36XS955 36" TV

Why wont my sentry RMC10 remote switch inputs on my emerson tv? It will change channels and volume. But it wont do functions like the menu button or input switch button.


Not all remotes will program for all sets or if do will be missing certain key features the original remote had. ... Standard (CRT) Televisions

TV is stuck on HDMI input and can't: adjust the volume, change the channel or switch Iinputs from the remote or the controls on the TV. None of the TV controls are responding with the exception of the power button on both the TV and the remote. I have tried unplugging it, waiting and turning it back on to no avail. Any suggestions?


... Westinghouse W4207 42 in. HD-Ready LCD TV

Toshiba 32AF44. While watching a baseball game yesterday, the volume bar appeared by itself and scrolled down to zero. The bar will not disappear. It's like someone is holding the down button. Tried using the TV remote to raise the volume, change channels, turn TV off. The remote changes nothing. So, I took batteries out of remote to isolate the problem to the TV. Using only the buttons on front of TV: On-off button will not turn off the TV. Volume-up button works until I release, and then


... Toshiba 32AF44 32" TV

My POLAROLD FLM323B is on channel 7 cannot change channel up or down by using remote or the controls on side of the screen up or down buttons


Check the websites like Shopjimmy.com,Ebay.com to buy a refurbish tv manual comtol board like Power, volume - +,channels - + menu operation functions manual control board for the replacement.The one on ur tv might be dead or u lucky probally just los ... Polaroid FLM-323B Television

I programmed my sudden link remote to my tv and turns my tv on an off, controls the volume, but when I try to change the channel of my television with the remote, the red cable light on the remote lights up as if it thinks I'm trying to tell it to change the channel on the sudden link channels and not the channels of my tv....help? (I know this sounds lazy because normally people would just say get up and change the channel but our tv buttons don't work and I don't have the original remote)


... Flat Panel Televisions

LG 47LG50 Program Menu displays on its own without remote control or manual inputs.


Thats the IR board. You can get the IR board along with the button assembly at the following link for your model its 15.00 just scroll down the page. It also may be the main board that has the issue if it is you can also get the main board there also ... LG Flat Panel Televisions

I was watching T.V. and when I went to change the channel, the remote control wouldn't respond. I changed the batteries (generic) & the new ones didn't make the remote work either. I hit the power button on the T.V. and it did turn the T.V. on & off & changed the channels. I think the bulb or the eye on the remote is the problem. I can't remember ever seeing the bulb actually lit up. It is dark, so it seems it would be red. It's an old T>V> & remote, but has always worked. HELP PLEASE.


You won't be able to see the light from remote's LED (Light Emitting Diode) because it is IR (Infra Red) which is invisible to the human eye.\015\012\015\012Try re-entering the code for your tv to see if it works.\015\012\015\ ... Flat Panel Televisions

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.2108 seconds