Having problems with your Flat Panel Televisions ?

I have a VSX-920-K Pioneer receiver, a DV-220KV-K Pioneer DVD player, and a Sony CRT TV with no HDMI input but only a video component input. I connected the dvd player to the receiver using an HDMI cable (for audio) and a video component cable (for video) as shown in the receiver's manual. I connected the TV to the receiver using a video component cable. I have set the HDMI Control option of the receiver to "OFF" to enable the selection of the HDMI input in the Input Setup Menu of the receiver b



Answers :

Repair Help & Product Troubleshooting for Flat Panel Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

I have a VSX-920-K Pioneer receiver, a DV-220KV-K Pioneer DVD player, and a Sony CRT TV with no HDMI input but only a video component input. I connected the dvd player to the receiver using an HDMI cable (for audio) and a video component cable (for video) as shown in the receiver's manual. I connected the TV to the receiver using a video component cable. I have set the HDMI Control option of the receiver to "OFF" to enable the selection of the HDMI input in the Input Setup Menu of the receiver b


... Pioneer Flat Panel Televisions

I have Philips satelite receiver DSR8121 with output scart (CVBS or RGB); HDMI/HDCP and composite. will connect to Yahama RXV367 amp. with HDMI in/output; component in/output and composite in/output. will connect to Samsung PS42P2ST plasma screen with pc input; scart video or RGB; s-video and composite input. I like to have optimum resolution (HDMI or component). How do I connect with or without converter(s)? I like to switch DVD with similar output on the Yahama Thanks in advance. Regards


... Samsung PS42P2ST 42 in. Plasma Television

My LG 60PZ550 Plasma HDTV turns on sporadically when connected to my U-Verse STB via HDMI cable. This does NOT occur when the STB is either disconnected from the panel, or when connected to the panel with component video cables. No other HDMI device (ie: Blu-Ray player, DVD player, HTiB) seems to exhibit this issue with the panel, only the U-Verse STB. Any suggestions?


Reset the uverse box. try resolution output settings from box. reseat the hdmi with tv and box. ... Flat Panel Televisions

I have the following Fujitsu model P50XTA51 and recently disconnected all the wires to move the set and reconnected all correctly. The only thing now is that the picture is not coming through. I rechecked component video inputs. No picture on cable or DVD but do get a picture on the Apple TV HDMI input. Suggestions


... Fujitsu 50 in. Plasma TV

I bought a Phillips DVD and am trying to connect it to the tx32lxd70. I have sound and no picture. The DVD has no HDMI so I am using component video jacks and audio cables. Everything is plugged in properly.....


Hi,Component video will work if you turn On Progressive Scan function in dvd player. Usually P-Scan function can be turn On through Menu or some dvd players has push button on front panel.If your dvd player does not have push button for P ... Panasonic TX-32LXD70 32 in. HD-Ready LCD TV

No video signal from HDMI out on Pioneer Receiver to HDMI input on TV


... Maxent MX-50HPT51 50 in. Plasma TV

My problem is getting a "This signal is not supported message" on an HDMI input into a Pioneer PDPR05G media receiver.


... Pioneer Flat Panel Televisions

My Denon receiver, mounted in another room, has HDMI inputs from my DVD player and cable TV. Signal goes from receiver through HDMI into a signal transmitter and then to the TV via Cat 5 data cable and signal receiver. The signal frequently drops out, and especially if any light switches are turned on/off. Is it likely the problem is the result of an electrical wiring problem, or could it be a problem with the Denon receiver itself?


It would seem that the transmitter and/or the receiver may be causing all the fuss...or the cat 5 is having issues...the cat5 cable may have some defect...try using another cat 5(even if it's 6ft long,move receiver closer to tv/dvd and use transmitte ... Flat Panel Televisions

The coax input on my tv is broken off how can I connect the cable to it other than the red white and yellow cords which don't have a good connection either I have my dvd player hooked up to hdmi is there a way to hook the cable up using the hdmi cord without a cable box just the line.


Hi, unfortunately the only ways to get the signal to the tv is with either coaxial, the red white and yellow rca cords, or hdmi and also the " RGB " inputs, also called "component video input ". some dvd players have component video outs-that could ... Samsung Flat Panel Televisions

I have a Samsung PN50B650S1FXZA and the HDMI inputs do not work.The component video and RF coax inputs work. Tried different HDMI cables and different devices Blu Ray player and Cable Box.


... Samsung FPT5084 50 in. Plasma HDTV

Some kind of weird hdmi surge took out my cable box hdmi output, the hdmi through my onkyo receiver and Mitsubishi wd-65c9 tv. Everything else associated with the components works fine. I tried all the normal stuff including unplugging and initializing the tv. No go. leads me to DM board? After initialization the tv will recognize a connection on hdmi-2 and 3, but will not work. The hdmi-1 port nothing. That is the one the surge came through (the one hooked to the receiver). Would like t


... Mitsubishi WD-65C9 65" DLP HDTV

Have isolated problem to vhf/uhf connection point. white lines flash in pic. w/a popping sound & if they stay for very long there is a buzzing as in over white or over modulation. problem shows when cable signal is fed direct to tv or thru vcr to tv. other tvs do not exhibit same problem so it's not the cable. have tried other ac outlets & same problem. other inputs; dvd, vcr work fine. cable signal thru vcr tuner fed to ht processor is fine but that is fed via component inputs to tv. sony has b


Hi,Problem seems with main tuner in this tv as other AV inputs working fine so please replace main tuner (TU2) to solve this issue.There are two tuners mounted on A board TU1 and TU2, please replace TU2 and part number would be written on ... Sony KP-53HS30 53" Rear Projection HDTV-Ready Television

Pioneer PDP- R05G media receiver error code "This signal is not supported" on HDMI from Nintendo Wii U.


... Pioneer Flat Panel Televisions

Sylvania LC260SC8 LCD TV has no picture. It displays white & black vertical lines on the middle to left had side of the TV. Audio still works fine. I swapped out HDMI cables, tried using the component inputs, hooked the co-ax to the TV instead of the cable box, tried 2 different video inputs all with the same issue - no picture, only audio works. Is there something that can be done to fix the TV? I love this TV. It's only 3 years old. Thanks for the help.


... Sylvania LC320SS8 32 in. LCD Television

I am having issues with my RCA Scenium D52W135D (playstation 3 connection). Recently, I have been having a very specific problem with this combo. I have it connected using HDMI to a Pioneer receiver (model# VSX-821-K). From this, an HDMI to DVI cable to the TV for HD picture. In the past, no issues at all. Recently, I can play DVDs/bluray discs and get full picture and surround sound. I can play PS2 games and get picture and sound. When I try to play PS3 games, I get sound through the rec


Had the same problem. With mine the other day you probably moved your Playstation 3 too another tv and set your 1080i,720,480 to high deaf on settings in Playstation. You have to change them back to automatic that TV says HDTV but it only plays Plays ... RCA D52W135D 52 in. TV/DVD Combo

Only 1 hdmi outlet on TV . I have a high def cable box and a sony blue ray dvd player. How do I connect 2 hdmi cables fron the components to the tv?


The proper solution is to connect both devices to the television using an HDMI switch. Go to amazon dot com, search for "hdmi switch", filter the search to keep only 4-5 star rated devices, and then select one with more than 100 ratings (to keep them ... Sony BRAVIA KDL-40S2400 40 in. LCD HDTV

My next base dvd player plays but the problem is no video even the hdmi cable connected in the television and no hdmi detected; since audio out is connected to amplifier it plays normal sound?


... Flat Panel Televisions

Hello, I just bought the KDL55EX720 LCD TV a few days ago. I originally hooked a DVD player up to it with the standard AV cords & it worked great. Lastnight I purchased a Blue Ray player and hooked it up with an HDMI cable. When I go to input it shows the HDMI connection, but when I select that connection the screen goes dark as if the TV is off so that I cannot go through the setup process with the Blue Ray player. I reset to the factory settings, but having the same problem. I have also tried


... Sony 55 KDL55EX720 3D LCD TV

Issues with LG 26LE5300 26 in HDTV LCD TV Both audio & video flicker off & on when connected to PC via an HDMI cable. No problem when in TV or AV (DVD) modes. PS. worked fine on Day 1, did not use HDMI on Day 2; problem arose morning of Day 3. I've tried the other two HDMI ports to no avail. I've disconnected and reconnected HDMI at PC. I've rebooted both TV and PC.,


I tried this.. and it works perfect for the video.. but there is no audio.Is there any specific setting to be made in TV or my laptop?I have Dell laptop with Win7, because I dont see any option to enable audio.. ... LG 26LE5300 26 in. LCD HDTV

Tuner needs about 10 minutes to "warm up" before viewable. Even then, scenes with a lot of white content are blurry. DVD input is instantly clear from start up without warm up. VCR input throgu tuner is same as TV signal and front input (for camcorder or video game is blurred until warmed up. Receiving signal from cable, non-HD.


This is an indication of faulty tuner,If transformer or some dry joints around them.\012Resoldering the dry joints is the first to be check.\012Sometimes cold solder is hard to spot so you need a qualified technician to do the job.\ ... Flat Panel Televisions

I bought a 2nd generation Apple TV. I bought a DVI to HDMI cable and connected to my Sharp Aquos LC-30HV6U using the cable on input 3 but I do not get any video or audio


... Sharp Aquos LC-30HV6U 30 in. HDTV-Ready Plasma Television

JVC HD-56G886 - Has began having intermittent loss of volume for a minute or so at a time. After doing so for 10 to 15 minutes, the volume will stay on for a few hours then the same thing will happen again. It is connected to a SONY AV receiver via HDMI cable. I checked other functions of the receiver by switching from the TV to FM radio and DVD...volume works in those modes.


If volume works when its connected to the DVD player(assuming you are using HDMI port for connecting the player too) then its undoubtedly due to a media receiver problem. Sony offers a 2 year warranty on DMRs so if its less than 2 years old you can c ... JVC Flat Panel Televisions

Lg47 and 42 lv5500 losing video and audio after on for a minute or so. Connected to dishnetwork receiver. Does it on all inputs. Changed receiver,cables and tv. Still does it. Software 4.02.28 Baffled


... Flat Panel Televisions

Hi! My mother gave me an Insignia HDMI TV, and I can't figure out how to hook either my Wii console or Sony DVD player to the TV. I transfered all of the audio/visual cables from the old TV to the new TV in the same way, but can't get the Insignia TV to move off channel 3 (where it connects to the cable box) to any of the input channels, and similarly have been unable to program additional channels in the menu settings. I believe the Insignia TV is the "audyssey" model if that helps. Any advic


Hey there!\015\012\015\012Is there a button on the set or remote that says "input" or "source"?\015\012That will change the input settings from cable, to HDMI or RCA (aux). ... Flat Panel Televisions

I have an LG 32LC2R TV. I was watching a DVD via that HDMI cable input and the screen just went black. There was power to the unit but no picture. Not sure about sound because I use sound from the DVD unit. I have looked on-line about help, but none really help. Can you give me some advise please? My TV is apart on my desk and I don't see anything out of the ordinary, no burned components etc.


Try the solution I posted (click HERE) and see if that helps!If not, post a note back here.If the link doesn't work, paste this into your browser navigation address barhttp://www.fixya.com/PostComment.aspx?thid=8624692&prdid=920509& ... LG 32LC7D Television

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1140 seconds