Having problems with your Flat Panel Televisions ?

Phillip 50PF9630A/37. I have a red blinking 7 times after a green light. i've allready replaced the 2 bulging cap on the bottom of power supply board and also a cap on the Y board (board on the left) although i sodered it backwards with negative on the wrong side, i imediately resodered it and it sitll doesnt work. i've even isolated and unplug the y board and x board independently to see if it will still give me a blinking red lights and it still does. i've checked every capacitors and fuse on



Answers :

Hello sir Jose!!!!

try to unplug the y sustain only and power ON your TV..and see what happen next..

Please reply to this tread for immediate help..

Repair Help & Product Troubleshooting for Flat Panel Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

Phillip 50PF9630A/37. I have a red blinking 7 times after a green light. i've allready replaced the 2 bulging cap on the bottom of power supply board and also a cap on the Y board (board on the left) although i sodered it backwards with negative on the wrong side, i imediately resodered it and it sitll doesnt work. i've even isolated and unplug the y board and x board independently to see if it will still give me a blinking red lights and it still does. i've checked every capacitors and fuse on


Hello sir Jose!!!!try to unplug the y sustain only and power ON your TV..and see what happen next..Please reply to this tread for immediate help.. ... Philips Flat Panel Televisions

Hey i have a 42 inch phillips plasma tv that blinks a red light 7 times but i have two of these tv's and took out the power supply on the working one and put in the broken one and it still blinks red light 7 times i also put the power board from the broken one to the one that does work and it still worked. so my question is what else could it be?


There three common boards (Powers supply, Y-SUSTAIN, Z-SUSTAIN) that go out, since you have two TV to try out, you should check the Z and Y sustain boards.\012What is the model number?\012Try looking here for free service manuals:\0 ... Flat Panel Televisions

Hi there, my sony grand wega kdf60wf655 had stopped working and was flashing 5 red lights. I tested the voltage from the power board to the lamp ballast board and got a 272v dc. Just replaced the lamp ballast board and now get blinking lamp indicator. Tried a new spare lamp that i had in reserve and still flashing red lamp indicator every 1 second. Any ideas? thanksp i


... Sony Grand WEGA KDF-55XS955 55" Rear Projection HDTV

I have a Phillips 32PFL5322D/37 tv that is about 2 1/2 years old. Recently the TV stopped working. All I see is 8 red blinking lights when I try to power-up. After reading multiple threads and suggestions I replaced the Power Supply Unit but still no change in the 8 red blinking lights. I have a power aux board coming in the mail and I plan to install. I am out of ideas here. Any other possibilities? It seems everyone is having the same problem with this TV. There must be a reason.


... Philips 37PF7320A 37 in. HD-Ready LCD Television

Emerson lc32oem2 power light blinks red. Just replaced power board. Still not working. What could be the problem.


... Emerson Lc32oem2

My toshiba 50hpx95 has a steady blinking red light, it has no pauses or breaks to recite a code, just steady blinking. I had it in the shop and they said the power board needed replaced, so i replaced it and still get the same code. Is there a trap reset, or other mode of reset that i am not finding in the "service" manual, or was the problem misdiagnosed by my repairman. I cant even do a boot via service code thru the remote. is there a way to do a soft boot under low voltage so the chip can gi


This tv have a Tuner signal board it is also dead too,this problems happen sometimes,the power supply board dies,but sometimes the Tuner signal board take power surges from the power supply board itself than kiill the tv Tuner signal board too.Try we ... Toshiba 50HPX95 50 in. Plasma HDTV

My Toshiba Regza AV55 has stopped working completely. After turning it on at the mains there was no power to the tv, i've tried it in various power points and even changed the fuse but there is still not power, no red standby light, nothing. It was working fine an hour before this and has had no other issues until now. Thanks


... Toshiba Flat Panel Televisions

50pfp5332d got this tv not working. found no power when conected and decided to remove back cover. found blown PCB fuse and replaced it,turn the tv on and the picture came on for 10 seconds and when out but tv was still on since the logic board led was on,also noticed led on PCB started blinking. pull power cord off and then plug back in turn power button on and got picture for 10 second PCB relay clicked picture died and led on PCB started blinking again. what do you think?bad PCB or ba


Hello\015\012The power regulator PCB has some fault it it. It does not outs proper regulated voltages needed to the other PCBs in your TV. Normally Plasma TV power regulator PCBs are very difficult to repair, and PCB as whole should be replac ... Philips 50PFP5332D 50 in. Plasma Television

I have the hitachi 42hdt20m, will not turn on at all. No led on tv, av center works fine just no power to tv. Could it be the power board? capaciters? Any other suggestions? Everything looks good, no fried caps and fuse is still good. Thx.


There are lots of other things that can cause the LED to not light up. Like if there is no standby voltage. This can happen due to a short in the 5V standby voltage line. The easiest way to fix this would be to replace the power supply board. I can ... Hitachi 42HDT20 42 in. Plasma Television

The tv cannot start. No red standby lights even though the switch was turned on. I changed the fuse and it doesn't work still. I have tried turning the switch behind the tv too.


Hi Julia,\012\012Your unit missing some output voltage(s) in the power supply section. This is commonly caused by open/shorted voltage regulator IC, open fusible resistor, leaky/dried electrolytic filter capacitor in the power supply section. Y ... LG 32LG30 32 in. LCD HDTV

Panasonic th-42px60u red LED blinking 10 times Install the P board - H board - PA board still have red LED blinking 10 times and will not come on . HELP Some one Thanks woodie


... Panasonic Flat Panel Televisions

I no longer have any Red color. Only yellow and blue. I've fixed a problem with a fuse on the deflection board. That fuse kept blowing so I re-soldered the FBT and it worked for several months. Now my red doesn't work. This just began last week and I didn't see any evidence of anything blowing. What are the potential problems, how can I narrow down what is the precise problem, and how do I fix them?


The most likliest cause would be a issue with the RED CRT drive board around 35.00 from www.tvrepairworld.com it could also be an issue with the RED CRT itself but thats doub ... RCA HD52W66 Projection Television

Toshiba model 42hp66 Plasma flat screen Problem No picture or sound. Pushing on button 2 clicks are heard A slight hum is heard at the Z SUS board. Green power light is on (power light is red when unit is off) Slight clicking sound from Y SUS board. Now that I replaced the open Fuse. (Fuse 4AH250VP Found open on Y SUS board as looking at rear the Fuse on the left). Still no operation?


Do you still have the clicking noise? The tv turns on but no response issue is associated with the main A/V board 99% of the times if there is no clicking sound ... Toshiba 42HP66 42 in. LCD Television

Replaced both convergence chips in my Toshiba rear projection hi def. I still have no side to side movement of my red. blue works great & red up & down works. now what should i do. I checked all the fuses I could. lots of work to do the chips & very frustrated. please help.


Hi Tom,\015\012\015\012Check the resistors around the convergence board, it has some open resistor that's why you encountered this kind of trouble. Some of the resistors indicated/printed the actual resistance value in its body but also there i ... Flat Panel Televisions

G board Hi. I have a Sony TV KDS-60A3000. The red power led was flashing red 5 blinks. I tried all the basic fixes and nothing worked. I got to the G power board and can see black on the C6501 and R6501 and one other area by the "LAMP DC". I have pictures of the board I can send you also. Thanks :)


... Sony KDS-60A3000 60" HDTV

I have replaced the p board and sc boards in this panasonic tc-p50s30 viera tv and still have the 7 red blinks? what else can be wrong?


7 blinks is indicate for faulty power supply however if you already replace it the possible problem is on main board.. ... Flat Panel Televisions

I need help changed power supply board and ss board and still no picture it is a model TC-42PX14 panasonic the red light still blinks seven times. At wit s end isn't much, can you help me.t


Check this link and select the site named 'Electro-help' You can get more details about the fault to your TV, with 7 blinks of standby light. ... Panasonic Tc42px14 42 in. TV

My Sharp Aquos LC-26D44E-GY in the spare room has stopped working. It worked ok about 2 weeks ago, went to switch it on last night & its dead. We had a thunder/lightening storm last week? Ive changed the 13A fuse but its still dead. Is there an internal fuse that could of blown?


First check your power outlet, try connecting the TV to a different power outlet. Then see whether the LED light on the TV is on or blinking. Anyhow, this might need attention by a qualified service technician. ... Flat Panel Televisions

I have a panasonic th-42pe7u, I just replaced the power supply board with a brand new one and now i get a red light that blinks 10 times consistantly, prior to the board change I was getting only a solid red light? what to check next? there are no obvious bulged caps or burnt diodes


... Panasonic (TH-50PZ700U) Television

I HAVE A 50' PHILIPS MODEL 50PFP5332D/37 FLAT SCREEN TV. I BLEW A BREAKER ON THE TV PLUG IN WITH A PORTABLE HEATER. TURNED BREAKER ON TV CAME ON WORKED FINE. TURNED OFF. 1HR. LATER A RED BLINKING LIGHT WAS BLINKING ON THE FRONT WHERE "BLUE" LITE IS IN "ON MODE" IT WAS BLINKING 5 TIMES THEN SHORT PAUSE, THEN BLINK 3 OR 4 TIMES IN RAPID SUCCESSION. I CHECKED ALL CONNECTIONS BOTH ELECTRICAL AND CABLE ALL TIGHT. SAME THING. I HAVE TRIED SEVERAL THINGS, BUT STILL BLINKS. THE REMOTE DOES NOTHING I CA


HI:\015\012 This is a plasma unit and philips plasma's are nortorious for bad power supplys, your problem may very well be the power suppy in the television, it is possible you blew a low B+ fuse on the power supply. There is also a issue with ... Philips 50PFP5332D 50 in. Plasma Television

My plasma samsung ppm63mf7: no power, all caps OK, ceramic fuses OK, I replace a failed sustainer board. Now power just clicks and blinking power lightrnSo I unpluged T-con board and Main board to check for shorts but problem persist.power board# bn96 03736a* does any body have experiance with this model Tvs


I had a similar problem with mine, i had to change couple of caps but it still would not power on. I ordered one online and it seemed to solve the problem. the power supply board for the TV are a bit expensive but this guys over at had one for under ... Samsung PPM63M7F 63 in. Plasma TV

Power/Standby led blinks red 3 times


... Sony KDS-55A3000 55" HDTV

I have a 50 inch lg flat screen model 50pq30c-ua. my screen is black but i have sound. i hear clicking as if it wants to turn on. the on light turns blue and begins to blink. i changed the power board with a working one from another tv to see if is the reason it stopped working but it still doesnt work. what do you think is wrong with it?


... Flat Panel Televisions

I have a Samsung LN40A530P1FXZA. It will not power up. I get 2blinks followed by short quick blink and then it repeats itself. I have replaced the power supply board and also the main board, and it still will not work. Does anyone have any idea as to what is going on with this tv? I wish I had an error code book for this tv, but I do not. The only thing I have not replaced is the TCon board. Need someone's help.


Try to download the manual on www.retrevo.com to see the error code for sure..Before you decided to replace t-con board please refer to the manual first,,but there is the possibility that t-con was faulty.Hope it helps..don't forget t ... Samsung LN40A530 40 in. LCD TV

Samsung lnt4665fx xaa video prolbem apperas main board has been zapped visible burn marks on hdmi port 2 blue light under samsung still comes on and red light flashes and relay clicks but no audio or video replaced caps in power supply did not help should the main board be replaced? should the main board be replace any suggestions would be helpfull thanks


... Projection Televisions

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.2686 seconds