Having problems with your Flat Panel Televisions ?

I have a Phillips 42PF9966/37 Ambiant Plasma TV. This TV is about 8 years old. When you first turn the TV on the picture is fine and you have sound. After anywhere between 5 and 15 minutes of being on you will start to get green and red dots appearing accross the picture where images used to be. This continues until the entire screen is basically green and then it starts to turn black. At this point you really can't see any images on the picture. Sometimes you can turn it off for a cou



Answers :

Repair Help & Product Troubleshooting for Flat Panel Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

I have a Phillips 42PF9966/37 Ambiant Plasma TV. This TV is about 8 years old. When you first turn the TV on the picture is fine and you have sound. After anywhere between 5 and 15 minutes of being on you will start to get green and red dots appearing accross the picture where images used to be. This continues until the entire screen is basically green and then it starts to turn black. At this point you really can't see any images on the picture. Sometimes you can turn it off for a cou


... Philips 42pf9966 42-inch Hd-ready Flat Panel Plasma Tv

Hi. Lately my tv is turning on but once the video signal is recognized, the screen goes green with vertical lines. Then the set turns off, turns back on, and then I may see a picture but the colors and images are all distorted. After about 5 min of off and on, it would finally correct itself. It does this with any input such as my xbox and dtv. Now it is at the point where it keeps trying to turn itself on and off to seemingly correct the input signal. Each time I may get a green screen, blac


This is a foreign voltage issue. It's very high voltage with minimal current. Milliamps to say the least. It is not dangerous. The only way to test for this voltage is with a foreign voltage tester that low volt techs and electricians use to iden ... Samsung LN46A550 LCD TV

I have Sony's 43 inch Projection TV, its model no is KP-ES43 ME1. Problem with it is that it has lost Blue color from its pictures. Anything that is of Blue color turns into different shades of Green color. But one important thing which i would like to share is that when we turns on PIP (Pictue-in-Picture) mode, images on the right side of the TV screen looks absolutely fine but Pictures on the Left side of the screen still have the same problem. I want to know what is the real problem and its


... Sony Projection Televisions

My Sony KDL-40XBR7 has developed two problems. 1) Sometimes when changing channels the screen turns green. I can solve this by turning off the set then back on, but what's causing the problem? 2) In the past few days whenever I turn the TV on there are horizontal bands from top to bottom. They are faint and the picture can still be seen. Additionally the picture is ghosted; a second ghost image appears larger and below the original. This lasts for a few minutes then goes away. Of course, the TV


... Flat Panel Televisions

My mitsubishi high-definition projectile tv serial #wd-60767. when turned on the little green light on front pannel starts blinling green till picture comes on screen, then it stays solid green un till cut off. now when i turn tv on green lights starts bling green as usually but no picture comes up on screen just sound only. green light then turns solid as usyally and then turns solid red. tv has no picture sound only.


... Mitsubishi Projection Televisions

I have had my samsung LN40B530 for 2 days now (got it used) BAD IDEA I Know I just dont have the $ for a new one anyway... everything was fine worked perfect and all of the sudden the picture almost paused it was moving very slowly and the colors were blending strangely I turned off the tv and turned it back on. All i have now on the screen is vertical lines white, blue, red and green. no picture sound is still there as well as all of the buttons being functional. Just vertical lines. I am a ver


The T-CON board is the place to start. If everything else is working (i.e. change channels, sound, etc) then this is almost certainly the problem.\012It's possible the problem is the connector(s) to the T-CON board. Over time the co ... Samsung LN40B530 40 in. LCD HDTV

I tried out two different TV (Panasonic and Dynex) and noticed an odd screen problem: the screen shows a bright 2 pixel shadow above and below certain lines. It's almost like it has a form of image sharpening that cannot be turned off, although I disabled it in settings on the TV. Here are the full details: Here: http://www.uploadgeek.com/share-BB9C_4DB0BB02.html or here: http://imgur.com/a/gvyw6 Note: I saw this same problem using HDMI on the Dynex and using flash memory with pictures


... Flat Panel Televisions

My Olevia LT26HVX has suddenly lost color control. It has been set with color temperature on Middle for all the time I have used the set. Yesterday when I turned the unit on, the picture is hot pink or magenta with little blue and no green. If I set the temperature to Cool, the color switches to mostly lime green with solid blue areas appearing as black. If I set the temperature to Warm, the screen picks up more blue but has an overall muted green cast with no red. If I select "user" for color


... Olevia LT26HVX 26 in. LCD Television

I have a bush 40 inch tv model number lcd40883f1080p about 1 month old use for Xbox was playing and suddenly my screen flickered at bottom half a green and light blue so turned it off back on and now have light blue lines and red in top half but it's flickering the whole screen can't watch or do anything as takes over picture please some help ASAP thanks


... Projection Televisions

I have a JVC HD-ILA HD-61Z575. The color engine was replaced under warranty a few years ago. Recently, I started noticing some color artifacts in the picture... basically in a dark picture, you can notice red, green, or yellow stars randomly on the screen. If I turn the TV off and back on, they usually go away and don't come back until the set has been off for a while. I tried cleaning out the bulb area and that didn't affect the issue. I've also yet to have to replace the bulb in the tv,


I only have bad news for you. This tv uses an engine assembly. It is impossible to replace the color wheel only. The entire assembly is quite expensive and wouldn't be worth replacing for a tv of that age. (By expensive, I mean roughly $400-$600, bef ... JVC HD-56FB97 HDTV

Mitsubishi WT-42313 Rear Projection TV Last night my picture started to wobble, then the image shrank until i had nothing but a black screen, and the TV turned itself off. Now when I turn the TV on, the green light lights for a moment, then goes back out. Thoughts?


If the green light blinks count the blinks it tells you something ... Mitsubishi WT-42313 42" Rear Projection HDTV-Ready Television

I have sony bravia kdl-40x2000 which: turns on and the power indicator light stays green (no flashing red light codes) has no picture has no images seen even using a strong flashlight has sound from the side of the tv cannot control volume/channels sometimes turns off and back on after being on for a minute I have tried changing the inverter boards already. Is it the mainboard 1-870-567-11 or something else??


... Sony Flat Panel Televisions

JVC LCD HD TV.Model LT32A4GASK. no picture and sound. My tv wont turn on.the power light turns on followed by the green light but the screen will not respond as if its no stand by.even if u use the power on on the remote control it does not respond


... Flat Panel Televisions

Hln617wx-xaa- picture on the screen freezes into a black/white image of what was showing on the screen. with no blinking LEDs, yet. I turn off the tv, then turn it back on. thats when the LEDs come


... Samsung Projection Televisions

I have Toshiba 57H94. For quite awhile, when you first turn it on, usually it only shows about 2/3 picture with a green or washed out color & then only shows the very top left corner of the normal picture, only magnified to take up that 2/3rds of the screen. You can fix it by turning on & off the TV 2 to 5 times. Once the picture takes up the full screen, the picture is great and then you can turn it on and off with no problem till you leave it set and totally cool off. When you're turning i


Something to see where problem might be: does set do this with a DVD etc connected to one of the audio/video inputs? ... Toshiba 57H94 57" Rear Projection HDTV

Hi, I purchased a Sony Bravia model #KDL-52S4100 two years ago. About 7 months ago when the TV was turned on there was no picture for 15 minutes or so, then when you turn it off and on again half a picture will show with larger images on the right hand side of the screen. Other times there is half a picture and then when you turn it off it will come on with a full screen picture. Once it warms up the picture is fine. Is there any inexpensive solutions here? Thanks for any help you can provide.


There's a good chance you have failing electrolytic capacitors either in the power section or the inverter section or both.Any caps in these sections that look bulged at the top, or bulged/leaking at the bottom need to be replaced.If you ... Flat Panel Televisions

I have a samsung le32r87bd and its got a strange fault! Basically the picture is good but for some reason when the menu or any Chanel info is up it has lines over that part of the screen that only stay whilst the info/ menu is up? Aswel as this when a pc input is used it turns itself off and on every 20-30 secs it also does this when usin Hdmi but only every 20-40 mins! Anyone got any ideas?


... Flat Panel Televisions

HI i have an RCA HD52W59 and the picture looks 3D, I can use the manual convergence but when tv is shut off and turned back on it goes back to the 3D look and the auto convergence does not work - the screen goes black and the green box startes in the corner but then just quits


Projection TV sets have two very common problems. One is convergence ( 3D/Warped video) the other is CRT fluid ( Dull Video). Below are more details for both items. Also, complete repair kits with instructions and repair support are avail from ... RCA HD52W59 HDTV Projection Television

I had nothing but problems with my plazma since I bought it. But a couple months ago there was too much red on the screen so I adjusted the red to almost 0 and it was OK not great picture. Then the other day the whole screen turned green , no picture just green with sound. A few minutes later it went black no sound and said searching for signal then went off completely. I turned off and unpluged it over night. But now nothing at all just black.


Your main digital and sub digital have failed. incredibly expensive.there is one attempt that you can make to try (by chance) to save it temporarily.The digital and sub digital are the two boards in the center of the TV where the input ja ... Hitachi 42HDS69 42 in. Plasma Television

Screen turns green The picture and sound are fine when I turn on the tv. After about thirty seconds the screen turns green and then turns off and the power light blinks.


Sad to say, but that's one of the ways a picture tube can behave when it's gone bad. After it warms up, one of the wire elements in the neck of tube sags and touches something it shouldn't. As a result you're seeing the green screen, and then the set ... JVC AV-32F704 32" TV

LCD television starts normal, but after 2-3 secs, the screen turns black and remains black, no picture, but sound is still there. All cables have been checked - all possible input channels have also been tested to see if they produced any images onto the screen. When i look in a dark room to the black screen (with a flashlight), you can see (but very hard to see) some grey images (tv pictures) moving over the screen. I've read onto this very interesting website that on some models, one c


... Samsung Flat Panel Televisions

Jvc lcd hd tv LT-32G40 no picture no sound when i turn the power on the green indicator lights turns on but the screen does not respond.even if you the remote control the screen does show any pictures


... Flat Panel Televisions

Produtools.com my diboss tv has sound but no picture only black screen after warm up it starts to show a skipping picture image I just recently got hooked up to the internet and had a cable connection installed it was from this time that my trouble seemed to start peter model no l t 261 HMF 24 v there seems to be a small image on the left hand lower side of the screen with 3 tiny green lights on it


... Flat Panel Televisions

I have an LG LCD TV...model #52LD550-UB.AUSMLFR. Was working fine last night, turned on this morning to a massive white screen. It still has sound, just on a white screen. I turned on the surround system and have picture on that using the AV1 component, but nothing when using the HDMI1 component. Tried changing the cable, thinking it was the HDMI cable that went bad, with no change. This TV is only one month old. Help!


... Flat Panel Televisions

TV turns itself off after about 5 minutes (green light remains on). I can turn off the TV and turn it back on immediately, however, the TV turns itself back off after a few minutes. It started turning off itself off after displaying harizontal shock waves like lines on the screen that got progressively worst. Now there is no line, just powers off. Once turn back on shows great for about 5 minutes then clicks off (no picture or sound) with green light still on.


Check and make sure your fans are working and there is sufficiant cooling to the back of the set. Sounds like it is overheating and going into protection mode. ... Mitsubishi WS-65513 65" Rear Projection HDTV

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.2426 seconds