Having problems with your Flat Panel Televisions ?

Video boards Had to replace the power board. Television now powers on, but there is ghosting of images and distorted color. I have tried to adjust the picture settings to no avail. There was never an issue with any imgae burn or color issues prior to replacing the power board. Before I replace the video board, is there anything else that may be causing this issue?



Answers :

Have you checked it using a different input device such as a DVD player? Have you ensured that the replacement board is exactly as per the original and the voltages at connectors are in same position and rating? If there is a voltage drop in any of the pins, look further in that direction and you can catch the culprit and conclude.

Repair Help & Product Troubleshooting for Flat Panel Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

Video boards Had to replace the power board. Television now powers on, but there is ghosting of images and distorted color. I have tried to adjust the picture settings to no avail. There was never an issue with any imgae burn or color issues prior to replacing the power board. Before I replace the video board, is there anything else that may be causing this issue?


Have you checked it using a different input device such as a DVD player? Have you ensured that the replacement board is exactly as per the original and the voltages at connectors are in same position and rating? If there is a voltage drop in any o ... Panasonic VIERA TH-42PX60U 42 in. Plasma HDTV

Have Samsung HL-S466W- Replaced Lamp (OEM), Replaced Color Wheel, Replaced Ballast. Currently the fan turns on for a few seconds, all three lights blink: Timer,Lamp, Standby. No Video or on screen sound. Lamp doesn't power on, nor can I really hear if the color wheel is activating. What can I troublshoot next before investing more in this model? Already verified the wires are correctly in place and the back door panel is tightly secured to activate the power switch.


... Samsung HL-S4666W Television

Samsung lnt4665fx xaa video prolbem apperas main board has been zapped visible burn marks on hdmi port 2 blue light under samsung still comes on and red light flashes and relay clicks but no audio or video replaced caps in power supply did not help should the main board be replaced? should the main board be replace any suggestions would be helpfull thanks


... Projection Televisions

I have a 2003, KF60WE610 60inch TV. My TV started occasionally losing the picture. The TV will go from normal picture to color patterns yellow/orange, green/blue, black and white. Then I'll have a black screen. The sound is fine. The picture returns without doing anything. The lamp light does NOT blink. The lamp was replaced a year ago. The green power light is steady. What could be the issue?


Your optical block is going bad. Sony has made a recall and is offering to pay around 70% of a new tv. Call this # 1-800-282-2848 Hope this helps. ... Sony Grand WEGA KF60WE610 60" Rear Projection Television

Visio VO420E, The left side of screen has a 6 inch wide group of colored lines, I removed the cover and the lines are directly in front of the main circuit board area (not the power supply board). Do I need to replace the whole board or is there a component that is known to cause this? I would appreciate any help you could give me.


Lines like that are almost always a bad LCD Panel, but just to test...Bring up an onscreen display (setup menu, volume bar, etc.) that originates from the TV ITSELF, not your cable, satellite, etc. You need something that intersects the area ... Vizio VO420E 42 in. LCD TV

I think I shorted out the power supply board on my Onkyo HT-R667. I was replacing some the capacitors to repair a hdmi switching issue. I was testing the repair with the top cover off. While it was powered on I accidentally touched the metal top to the top of the power supply board CMKM-P3X. There was a spark and the unit turned off. It won't turn back on. No lights. Can it be fixed or can I purchase a replacement board if this is even the issue. Thanks


... Flat Panel Televisions

I have an LG 47LX9500 TV that has in a years time developed issues with the audio/visual receiver. Video feed from receiver to TV goes out. I have replaced one Harmon Kardan and a Denon AVR -1620 an


... LG 47LX9500 47 in 3D HDTVReady LCD TV

I have a Samsung HLP 4674w DLP. The picture started to lose color and look like a negative image. Then it would get scrambled and eventually go out. Powering on and off sometimes fixed it, but only temporarily. Sometimes it would also turn off and on by itself. I thought it may be the lamp so I replaced it, but it did not fix the problem. Next I thought it may be the color wheel so I replaced that, but the problem did not go away. Also when this happens the Power switch will not turn the TV off.


You need to change the lamp out, it builds up a internal resistance, and pulls your voltaged down, it will get to the point where you TV will not come on at all. Replace your lamp, you can get one at ... Samsung HLP4674W 46" Rear Projection HDTV

I have a Hitachi plasma model# 55hdt79 that went black out. No display at all. Sound is ok. We checked the power supply unit and found out that 90v output is missing. We changed the power supply unit assuming that this is the cause, but still the 90v is missing. All the LED lights on in sequence and switch off after loading when I switch on the main power switch. This means no error. The TV can be switch on and off by the remote. Which board is probably the cause of this issue?


It sounds like the transformer on board has gone out (not the one in the power supply) and is no longer charging the panel. the board internally that holds the transformer will have a model number on it, any decent repair facility should allow you to ... Hitachi 55HDS69 55 in. Plasma Television

Okay, so my Panasonic PT-43LC14 went black in mid show last night. The bulb is approximately 18 months old. The LED indicators upon Power On are; Power LED blinks green for approximately 70 seconds; Then the Power LED switches to Red Blink, and the LAMP indicator blinks once every 5 seconds. Service manual indicates this means lamp or ballast issue. I've inspected the lamp, and it doesn't appear to be burned out. I've disassembled the TV and check the ballast for visual issues and see none.


Check the bulb again and look at the root of where the main stem comes out inside and be sure you don't see any bubble like appearence around the stem at the bottom there. If you do see this then the bulb is bad. Otherwise try this: Hold volume do ... Panasonic PT-43LC14 43" Rear Projection HDTV

TV has power but it won't turn on. Amber colored Vizio is lit up. Press the power on button and nothing happens. Seems like a power supply issue. What do you think?


... Vizio E421vl 42 Inch Class Lcd Hdtv

I have a JVC HD-ILA HD-61Z575. The color engine was replaced under warranty a few years ago. Recently, I started noticing some color artifacts in the picture... basically in a dark picture, you can notice red, green, or yellow stars randomly on the screen. If I turn the TV off and back on, they usually go away and don't come back until the set has been off for a while. I tried cleaning out the bulb area and that didn't affect the issue. I've also yet to have to replace the bulb in the tv,


I only have bad news for you. This tv uses an engine assembly. It is impossible to replace the color wheel only. The entire assembly is quite expensive and wouldn't be worth replacing for a tv of that age. (By expensive, I mean roughly $400-$600, bef ... JVC HD-56FB97 HDTV

I cleaned out my Samsung hl-s6187w and put everything back together and now it doesn't turn on. It makes a beeping noise like fast morse code and keeps cycling the power trying to turn on. The ballast gets about 270v from the power board, but the lamp never comes on. Could it be the ballast or the dmd board causing the problem? I can hear the color wheel spool up, but the beeping isn't consistent to be the color wheel.


Tv projection lamp inside the tv less than 2 years or so?Yes than the tv projection Lamp is good.You have this tv like 3 or 4 years already?The tv colors wheel even have been replace at leat once?No the tv probally require replacing the colors wheel ... Samsung HL-S6187W 61 in. HDTV

I have a Mitsubishi WD-65733 the color wheel seized up on me one night. so i replaced it and i replace the lamp to cause it was getting dim. Now when i turn the t.v. on it is like the colors are not m


... Mitsubishi WD-65733 65" HDTV

Ilo ltc32ha36 tv power supply board MLT169B rev 1.1 ( must be this board and rev) Need the value or color bands for R68 (between x-former and heat sink by C18 and D14) I can barely see the colors on mine( possible heat damage) . It wont power up cold and i have already replaced the caps and found C18 open and R12 and R13(bottom side) got very hot. I am not sure if D14 or R68 are bad Thank you


... iLO LCT32HA36 Television

Hello! I'm having the infamous black screen issue with my Viewsonic N3252W. I initially replaced the Power supply, because that looked like it was "the fix" for this particular issue. I powered it on, and I was getting the same problem. There was a faint picture (you need to look at the screen from a certain angle, with an appropriate amount of light shining on the screen.) with no back light! All of the voltages coming off the new PSU are right where they should be, including the 24VDC to the


You can do a simple test on the set.\012Turn the set on and place a bright flashlight against the screen. Look around the edge of the flashlight for a moving image. This will show you do not have a back light. If one of the transformers on t ... ViewSonic N3252w 32 in. LCD Television

Hello, Im having problems getting a pictur on my screen. The screen stays black but the power button is green so that means the TV is on but it wont show anything.. I also don't hear sound either im not sure if this could be a power supply issue or black light inverter issue or even a burned out pixel..I have only had the TV for 3 yrs so i don't think the problem should be that major but i am concerned because i don't no where to start help me please!!?? :)


... LG 32LB4D 32 in. LCD HDTV

Replaced burnout lamp. now lamp flashes amber color and tv will not power up... did power up for awhile, but only got sound, no picture. now like i said lamp light flashes amber color.


Ses120169,\012\012It sounds like when the lamp went it may have damaged the ballast. I have a tip at \012\012http://www.fixya ... Mitsubishi WD-57733 57" HDTV

When playing video games there seems to be a distinct change in the brightness level, especially of background objects, when I move the camera on my LN46B640. This issue is difficult to describe but seems to be some kind of gamma/brightness/lighting issue. Just want to know if this is common with this TV. Also, the AutoMotion Plus feature WILL NOT function with video games. Turning this feature to standard causes terrible stuttering, triple images (such as on cross hairs when turning the cam


... Samsung LN46B640 LCD TV

Replacing lamps on Dedolight DLH4 head with DT12-4 power supply. As soon as I go to full power lamp burns out .Using Osram 12v 100w lamp


... Projection Televisions

Convergence Issue I've replaced the FL231 (even though there was no issue with the previous one - tested in afterwards and it was fine). I fix the soldering issue on the flyback as well. I went ahead and did the auto convergence once I powered the tv back up. I still have the same issue. Picture looks like it is in 3D. I obviously have a convergence issue but I'm not sure where the problem is.


... RCA D52W23 52" HDTV CRT TV

I have a Magnavox 20MF251W/37 that when I plug it in it turns on to the standby mode (red power light). When I power it on with remote or by pressing power button it does turn on (blue power light). Shortly thereafter, I do see an image (snow at this point since I don't have it plugged to any video source). However, that image stays on the screen for only 1 second then disappears. The unit is staying on and is NOT going back into standby mode (power lights stays blue). I have replaced main


Hi tempcheck,\015\012\015\012Lot of brand have a common symptom when there's a malfunction in inverter board, it will automatically shuts down the unit. This is because there is a protection circuit designed connected from this board to the mai ... Philips Flat Panel Televisions

My JVC HD56G786 rear projection tv is not powering on anymore. I have recently replaced the bulb (as I've done once in the past) and it worked fine for about 4 weeks. This weekend it began powering off on its own after being on for a couple hours and the blue and red lights would flash rapidly simultaneously. Now it won't power on at all- it begins to power up and then immediately shuts down and the lights blink rapidly. The bulb appears fine, but the owners manual says that this issue arise


It may be a fan or a power supply issue, as you said.If there is a fan or other cooling device near the bulb, make sure it is operating. If it is not operating, replace it and see if it works. If it is a fan problem, you will notice becau ... JVC HD-52G786 52" Rear Projection HDTV

Power surge caused my Dynex 37 LCD to blackout. The red power light blinks but will not power on. I have replaced the power supply board but still have same problem


Being that it is a Dynex, an off brand, i would toss the TV on craigslist and if you get $40 for it take the money and run. The general rule of thumb is that if you can repair the TV for less than half of the cost of a new set, you repair. If the rep ... Dynex DX-LCD37 TV

Samsung 61 Service Model: HLP6163WX/XAA Model: HL-P6163W Samsung DLP with flickering and partial freeze frame upon start up persisting for about 10 minutes before picture (from any signal source) will resolve and then operate properly for as long as the set is left on. DLP bulb recently replaced and does not appear to be the symptoms of a bad color wheel. Could this be a light engine issue? DMD issue? light tunnel issue? ballast issue? Not sure how to trouble shoot... please help...


If using a cable or sat box try a DVD etc when set cold, a box can cause lockup issues via signal.Not a color wheel is correct, more likely a DMD which is rather pricy and almost as much as the entire light engine which comes with it. ... Samsung HLP6163W 61" Rear Projection HDTV-Ready Television

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1367 seconds