Suggested Questions/Answers :
It is recommended you read all this kind of situations
My television is two and a half years old, and therefore outside of the warranty period. All of my HDMI inputs have stopped working, but the other video and audio inputs work fine. I have tried disconnecting the power supply and restarting, but they still do not work. Any advice on what could be wrong and how to fix it? I'm not afraid to work on the unit myself, but would also be interested to find out how much it might cost to fix.
\012Try using a new HDMI cable, unless you have verified that your current HDMI cable works on another television.\012If this does not fix your problem, I would recommend taking the television to a TV Repair ...
Panasonic TH-42PX75U 42 in. Plasma HDTV
My LG 42LM620T Led tv has sound but no picture, what could be wrong.?
One day, while watching TV suddenly the picture went off, but there was still sound. Thought I might have pressed some thing remote, tried all options but nothing worked. Switched off, removed the plug but still no change. When switched on I get LG log and picture for a second and then goes off, only sound stays. Tried with different inputs still the same. When flashed light on the screen I could see faint images. Opened up th
LG 42LM6200 42 in. 3D LCD HD Cinema Smart TV
I have a Sharp Aquos 40E67UN. We came home yesterday and although the TV turns on and our directv box turns on, the tv just has a blank screen where you can go to different inputs, but none of the hdmi inputs work. I also tried hooking in my DVD player via 2 different hdmi cords to make sure that it was the direct tv box that was the issue, but the DVD wouldn't work either....just a blank tv screen (but its on). Any ideas on what could be wrong? I can change the channels, the remote is still
It's possible that you have a faulty component on one of the circuit boards inside your tv.\015\012\015\012It sounds like your backlight is working OK since the screen is lit up despite having no video so the fault is either with the MAIN ...
Sharp Aquos LC-46D62U 46 in. LCD HDTV
All 3 HDMI ports aren't working showing "no signal" (my main problem), but only port(input/source) on whole tv that works is RCA input/source(A-V,Y-R-W cords)
Curtis LCD3227A 32-inch LCD TV
I have a Mitsubushi wd 73638. One day it just wouldnt turn on and havent been able to locate a problem online.We contacted a dealer that was 200 miles away(closest one to us) and they didnt seem interested in fixing it for us,but also didnt tell us what could be wrong with it. We havent done anything to it, it just stopped working one day. Leading up to this i noticed when id turn it on,it wouldnt turn on. I had to push the button again for it to turn on.Could it be the lamp? I have removed the
Mitsubishi WD-73638 73-Inch 3D-Ready DLP HDTV
Possibly did something in settings, as tv wont pick up signal on any input. it stared with my hdmi input....one day my sons ps3 no longer would work on tv. I figured hdmi input went out after I tried changing every setting in the input mode. Cable and wii still worked fine. one night I went to turn his tv off and hit wrong button. from that night on tv wont pick up signal on any input. No cable at all. Actually have cable coax, not hdmi for cable
Haier HLH32ATBB 32 in. LCD HDTV
The remote control for our vizio E420VL tv works according to the camera test and actually will work within about 2 feet of the tv, but if we move back any further than that, the remote will not work for the tv. What might be the reason for this and what might we do to fix it?
Vizio E420VL 42 in. HD-Ready LCD TV
I have a sharp Aquos LC-C4067UN and the tree high def input are not workin the other inputs work fine how cant this be fixed or do i have to change the main board
Sharp Projection Televisions
Sylvania LC260SC8 LCD TV has no picture. It displays white & black vertical lines on the middle to left had side of the TV. Audio still works fine. I swapped out HDMI cables, tried using the component inputs, hooked the co-ax to the TV instead of the cable box, tried 2 different video inputs all with the same issue - no picture, only audio works. Is there something that can be done to fix the TV? I love this TV. It's only 3 years old. Thanks for the help.
Sylvania LC320SS8 32 in. LCD Television
For some time now, my Samsung DLp rear projetion tv (HL-R4667W) gives a "no signal or weak signal" on all inputs. After being on for a perdiod of time, which seems to be lengthening, it will pick up the HDMI input. It still is hit or miss with other inputs, such as Component or RCA. I don't know much about the inner workings of TVs, but am assuming this is some type of input board issue or something. What is the problem and what kind of part would fix it? thanks.
Yes it is a board malfunction. The source of the problem in your case is the "Digital Board" which contains all the tuners and video processing circuits. Replacing it would resolve the problem. If you would like to fix it yourself, take off the back ...
Samsung Flat Panel Televisions
Tv sony kdlv40xbr1 stable vertical lines, no resonse from control except power buttum, plays only through hdmi input. no other inputs working. has vertical lines covering entire screen. could this pro
The T'Con board should be checked and replaced. Before replacing it check all connections comes to it and go out from it. Re-seat all flat cables connected to it. Check ...
Sony BRAVIA KDL-40S2010 40 in. LCD Television
Video input on the front and back don't work the only one that works is the HD its a toshiba tv model 50h81 can i fix this
If using a box unplug it and set from power and wait, then plug both up and let reboot to see if it helps--if a real problem in the set the cost to repair and the parts that may not even be available end the life of this set.. ...
Toshiba 50H81 50" Rear Projection Television
Philips Magnavox 9P6031C103 projection tv quit working 2 years ago (before, the picture began to shink and expand until it finally quit completely with no audio nor video -- turned it on two years later to double check the symptoms (whether there was any chirping sound) so we could order a repair kit and the tv worked perfectly fine for a couple of hours and then I turned it off, thinking the problem had worked itself out and no fixing was needed (must have been the bad Suddenlink connection th
Based on what you described I would say your TV has the "shrinking and expanding" fault. Its a common problem on that model and the symptoms can range from the video shrinking and expanding or no video or no audio....You can read more about this fix ...
Philips Magnavox 9P6034C 60" Rear Projection Television
I have a Samsung HDTV model code is HLR4667WAX/XAA. It was working properly until one day it kept on freezing and then it popped. Now everytime i turn it ON, the screen is just BLACK with no sound and on the POWER BUTTON, the word LAMP is blinking. I dont know what's wrong with it. I took of the LAMP and nothing was wrong with it. By the way, i recently bought the LAMP. Can someone help me and tell me what might be wrong with my television?
INTERMITTANT failure of the I/R sensor? sometimes remote will work properly, othertimes remote will not work nor will manuel chanel up/down on/off buttons on set itself. i had a service agreement and brought it to the only service in my state, 90 min drive each way, they could not find a problem, as soon as i plugged it in it failed to work, now service contract has expired. still continues to be an intermittant problem. What parts might i consider replacing?
I don't think it's the remote nor the I/R sensor that's bad. It might be a processor problem on the control board - need to troubleshoot further. Since it is intermittent, I believe it's a cold solder connection on the board. You can inspect the boar ...
Venturer PLV31220S1 22 in. LCD TV
CC was always on and working fine then yesterday everything worked fine on our Sony Wega Trinton 27" square TV and all of a sudden it does not work on any channel. We go through a box with our cable co. Comcast and they said its not them. Everything is checked off right and turned on.
So what could have happened? Can you tell us whatt it is and how to fix it?
I recommend turning on the cc "on" in the cable box and see if that helps you out. Let me know if that works for you... Good luck... HDTV GURU JAY. ...
Flat Panel Televisions
Panasonic model th-42px75u: heavy thunder and lightning must have created a power surge. both hdmi ports on my tv do not work now as there is a blank screen. coax works. cable box, xbox 360, hdmi cables all work on my other tv (LG). could th hdmi port been fried? if so, how do i fix? or do i just buy a new tv? i had a protective power surge connected to all tv and entertainment power sources. much appreciated.
Panasonic Viera TH-42PX80U Plasma TV
I have a SK-26H730S Westinghouse tv. The HDMI cord works for plugging my laptop to it, but won't work for the ps3.. it just says no signal detected after it autotunes to the input. The ps3 works with the same hdmi cords on other tvs in the house.. is there a setting that needs to be fixed?
Westinghouse Electric SK-26H730S 26 in. LCD TV
I have charter cable and I'm getting a ref code s0900, iv try'd unpluging the cables and plugging them back in. It still won't work. Iv also reset it on the menu. It has not worked for 2 days now, what I don't understand is my room mates tv and cable work fine so it can't be an outage. Have any idea what's wrong and how to fix it??:)
Flat Panel Televisions
Moved tv in....it worked before I moved it....now I cant get a clear picture on any input. I pull up menu and it is clear and the sound is fine. Do I have screen probkems now or could it be the inputs in the back?
Hi Scott,\012\012Try to wiggle the input cord also the jack. If the picture come out clear then you might have a loose connection. To confirm you can swap a new cord and then hook up again. If the symptom is still there then you have a loose co ...
Samsung Projection Televisions
I have a Blaupunkt IS 70-33VT PIP TV. It has worked perfectly since 1994 and the picture and channell changing are still good, but the sound only works when the volume control is being increased. The local tech says parts for older sets are impossible to obtain and they are not worth the effort. I would really like to prove him wrong and believe I have enough ability to replace a component if I can discover which one. Any advice you can give will be greatly appreciated.
Flat Panel Televisions
My tecknika tv is shown a a very faint picture it's as is a bulb has gone and is not shown any light what could be wrong and how could I fix it ? Thanx
How old ur tv plz u write ...
Flat Panel Televisions
Hi I have an LG 37LC55 which works fine with scart no problem but when I am using hdmi after about 5-10mins the screen scrambles and goes green, purple, yellow but sound still works when I switch it off and back on again it happens quicker but if left to cool down happens after 5-10 mins again . Its just strange that it doesn't happen on scart any advice would be appreciated on what it could be and if it's possible to repair at a low cost
My freind i think it is not a problem.maybe it is from the device connected with tv hdmi try another device or go to system setting of the device to change the video format(try 1080i) ...
Flat Panel Televisions
PANASONIC TH-42PZ80U - right half of the screen is not working, so then I unplugged the tv. After turning the tv back on it worked but the then it happened again. So what is wrong with my TV and how much would it cost to get it fixed? the tv is abou 4 yrs old
Panasonic TH-42PX60U Television
I have a 5 years old LG PDP42V8 Flat Screen TV.
It worked fine and all of a sudden, something happened.
Basically, Sound is working, and even you can watch the tv.
but its very dim. it just looks like the light behind the tv is gone.
so its just not bright, and on a sunny day you cant see anything. but during night time, you can see soomething from the film on the tv. do you know what the issue might be, and can i fix this issue?
LG 42PC3D 42 in. Plasma Television