Suggested Questions/Answers :
It is recommended you read all this kind of situations
Hi there I have recently bought a Panasonic Viera 32", I have installed the Sky Box and Bush VCR/DVD Recorder Combi correctly but when I turn onto AV2 and switch on the DVD player the screen comes on but is bright green! I have tried all suitable tuning methods and have been through the installtions time and again and checked all cabling but it will not change, it can't be the Bush Combi as it worked perfectly with my previous Samsung set, this is really frustrating, I can't see that it is a fau
Panasonic TH-37PX50U 37 in. HD-Ready Plasma Television
My daughters got a Bush portable dvd player 533/8887(D) for christmas, they used it for the first time last weekend and it was fine, now the screen is white and picture barely visable, no sound either. Have tried adjusting brightness etc but cant see the screen to see what I'm doing! Any advice before I whip it back to Argos pllleease thnx
Bush Flat Panel Televisions
Hello I have a bush 22 inch led full hd tv/DVD combi and I was watching a DVD when it froze I turning it off and managed to get out the disk however now the DVD screen is in black and white all the time and the DVD buttons on the remote won't work is there anything I can do ?
Flat Panel Televisions
I have a RCA HD61w66 serial f494cg09b3 when i turn it on it blinks 3 time then power the green light off no sound no picture or anything check all the caps everything looks good what i have saw but just cant figure this out
RCA HD61W66 61" Projection HDTV
Hisense HL81V88 Have just disconnected my Austar Box and plugged in for normal TV. Have auto tuned the Tv several times however channels not being picked up. Have checked to ensure antenna coax connections are correctly installed. Have now reset to factory settings. have auto tuned again and still no result. Thought it maybe related to the system setting needing to be set for Australia BG however dont know how to bring this screen up to check this. Cannot bring the TV back to original first time
Flat Panel Televisions
Sanyo DP42746 TV - I get the black screen and no sound (like many others). What I've tried so far, 1)checked all the fuses, 2) Checked PWB input and out (118 vac), unplugged the power cord waited a few minutes and plugged it back in. I get the click when I turned it on and a few seconds later another click. Then, the error led blips 12 times (Time Out error). Any ideas Matt?
Sanyo DP42746 42 in. Plasma Television
Hitachi ultravision 80 inch rear projection LCD tv. Tv went out (I thought) so I replaced the bulb. Four times. Brother then told me Nothing was wrong with the bulbs. I've got it ableto turn back on but after ten minutes the tv will turn itself off. And them turn itself back on. It's done this about 6 times so far. Any suggestions? I've taken the back panel off and checked the fans. Both are working. Checked the tab that alerts the tv if the bulb door is open. Please help!
How about the power supply did you check, if their is any bulged capacitors which need replacement. ...
Doesn't power up. Relay clicks several times, several seconds apart. After third click, power LED blinks three times. The OPC LED blinks once when the power LED blinks the first time. LED blinking pattern repeats every couple of seconds. Opened up TV to check capacitors. All look good. Purchased service manual, but there weren't troubleshooting steps for the power board. Any suggestions as to which board should be replaced first?
First of all you should weight the cost benefit of repairing the set versus purchasing a new one.\015\012\015\012Depending on the size and model of tv, it may be more prudent to simply cut your losses and buy a new tv rather than spend mo ...
Sharp Flat Panel Televisions
I have problem with HDMI on SONY KDL 26U2000.
I bought digital satelite complette with HDMI. I connected it to TV.
But video and audio signall is sometimes shortly breaking.
More times on HD programs.
My service engiener checked cables - all are OK.
He checked satelite signall - all are OK
He checked satelite complete with another HD TV (Philips, LG, Samsung...) in his company. HDMI on satelite complette worked correctly.
I would ask you about help.
Sony's can be picky about HDMI.Check for software update that addresses HDMI issues.Contact Sony for software. ! 800 SONY USA ...
Flat Panel Televisions
Hello. I own Samsung sp47w3hfx: I cant browse tv menu,cant change any setting,cant set sleep time...Tried turning off child protection in factory setting but to no avail. Someone please help me.
Standard (CRT) Televisions
I have a philips 42pfl7403h and it wont start. The led in front blinks three times and after short paus blinks three times again.
I checked powerboard for something obvious as burned places etc but i looks alright but still it doesnt work.
What is the excact problem when led blinks three times?
I have changed out the H.O.T. and the flyback on my R52WH74 model tv because it wouldnt come on and it would make a chirping noise I checked all the fuses and capacitors now with the new parts in the green power button light comes on for about 2 seconds and then goes off with a low pitch chirp it does this 3 times and then nothing i checked all fuses and capacitors again and found that 3 are not responding one is cp049, rp050 and cp050 could thiese be my problem or is it something else?
RCA R52WH73 Projection Television
My screen on my RCA SRS FOCUS HDTV the screen is a little left I can't see the scores in NFL games i cant ser the scores in the top left and UFC fights in the bottom left i cant see how much time is l
There should be a button on the remote that says aspect or zoom hit that till you get the size you want ...
Flat Panel Televisions
I have a Samsung LN40 b500 P3F. When I turn on the TV, the backlight flashes three times then goes dim. I know the TV still has a picture cause when I hold a flashlight to it I can still see the picture. I checked the connector on the powersupply that connects to main board and all voltages are there. I will load a video later. please. tell me what to check next.
Samsung LN40B500 40 40" HDTV LCD TV
Turn on the tv and the green power light flashes 2 or3 times and want cut on then you cant try that again for 30 seconds then it does the same thing with the power light flashing 2 or 3 times you can hear the clickiking sound like it s trining to turn on
Set has the 3 strikes and you are out= will try 3 times and then goes into shutdown===you have either a power supply problem or a short somewhere. ...
RCA HD52W140 52" Rear Projection Television
UN55D8000 fuzzy I bought a Samsung UN55D8000 about 2 months ago and I am not happy with the picture at all! I am only watching HD chanels and the pictures are not clear enough. I even switched from ATT UVerse to Time Warner, the installer checked all my cables and I bought the most expensive HDMI Monster cable and the picture is still not good, not crisp, fuzzy, edges of people are jagged, etc...I have checked every adjustment possible on the settings...any suggestions?
Samsung 55 UN55D8000 55 3D LCD TV
Hi i have a lg32lb4d. since like 6 month i turn it on , everything is fine , but after some time like 25-30 minute my screen turn black , cant do anything not even close it with my remote i have to unplug it , wait some time and then plug it again and it will do the same thing , im habitually good with electronic but that.... help me
LG 32LB4D 32 in. LCD HDTV
I have Vizio XVT3D474SV I bought a year ago, in the last week while watching TV, the screen start to flash, display becaome white with 3 black lines and after a while it becomes black (the all time the sound stay as normal). while looking inside I see the backlight flashing till the screen becomes dark (than I do not see any light inside). After turning off and ON the TV several times I get back normal pictures but the same phenomenon comes back in few minutes.
I checked all 8 micro fuses I have
When the picture is dark, show a torch light on the screen from a safe distance. If you can see the picture, the backlight is the problem. Anyhow, it is better to show it to a qualified service technician. ...
Vizio XVT3D474SV 47 in. 3D LCD TV
I have a JVC model AV - 48P776 and i cant find the HDMI channel. i try to connect my PS3 to the HDMI but cant find the channel. the only channels are: TV, VIDEO 1, VIDEO 2, VIDEO 3, VIDEO 4, and DIGITAL OUT. and believe me i have checked every channel. (VCR, DVD, GAME, etc) and still no HDMI. please help i really want HDMI
JVC AV48P776 48" CRT TV
I have a 32lc7d tv and i cant get it to turn on all the time. the on light will be green but no sound or picture. the light also blinks about 15 times before going to a solid green color. the tv will finally go on after about 5 or 10 mins. help me and my sick tv please.
This problems ur tv are having are only can be causes by two boards,the tv power supply board or the tv Tuner signal board.The tv power supply board that the board where the power a/c cord plug into it.The tv Tuner signal board that the board where ...
LG 32LC7D Television
I got a 2003. 52 in RCA D52W20 HDTV and I keep getting a code i cant get TV to turn it blinks 9 times then 5 times can anyone help me? ty
This blinking is unfortantly not an error code. The one thing that you can determine from this blinking is that the main fuse. and the sub power supply is functioning. The blinking is also an indication that the cpu of the set is getting power.And it ...
RCA D52W20 52" Rear Projection HDTV-Ready Television
I HAVE A 50' PHILIPS MODEL 50PFP5332D/37 FLAT SCREEN TV. I BLEW A BREAKER ON THE TV PLUG IN WITH A PORTABLE HEATER. TURNED BREAKER ON TV CAME ON WORKED FINE. TURNED OFF. 1HR. LATER A RED BLINKING LIGHT WAS BLINKING ON THE FRONT WHERE "BLUE" LITE IS IN "ON MODE" IT WAS BLINKING 5 TIMES THEN SHORT PAUSE, THEN BLINK 3 OR 4 TIMES IN RAPID SUCCESSION. I CHECKED ALL CONNECTIONS BOTH ELECTRICAL AND CABLE ALL TIGHT. SAME THING. I HAVE TRIED SEVERAL THINGS, BUT STILL BLINKS. THE REMOTE DOES NOTHING I CA
HI:\015\012 This is a plasma unit and philips plasma's are nortorious for bad power supplys, your problem may very well be the power suppy in the television, it is possible you blew a low B+ fuse on the power supply. There is also a issue with ...
Philips 50PFP5332D 50 in. Plasma Television