Having problems with your Flat Panel Televisions ?

I have a Panasonic TC-P42C2, the picture is black and the red light blinks ten times. I already replaced part# NOAB6JK00001 (P-board) and that was not the problem. Does anyone know which board it wo

\015 Panasonic 42" plazma tv. red light blinks ten times. It is not the P-board as I already replaced..\015

Answers :

Repair Help & Product Troubleshooting for Flat Panel Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

I have a Panasonic TC-P42C2, the picture is black and the red light blinks ten times. I already replaced part# NOAB6JK00001 (P-board) and that was not the problem. Does anyone know which board it wo

... Panasonic TCP42C2 42 in TV

Image flip my LC-37SH12U stopped working and I replaced the tuner board with the same part number and the TV turned on. Unfortunately the image is upside down, and this Sharp TV doesn't have the picture flip option. I tried another tuner board with the same part number and the image is again flipped. Anyone know how to flip this image ?

... Flat Panel Televisions

I have a Sanyo DLP 50747. When I turn it on It clicks off in about 10 seconds. I read online to try replacing the sub-power board(part# SJ-B10N2010A) and if that does not work then replace the power supply board (part #LJ41-05246A) both of which I purchased from Shopjimmy.com. I replaced both and it still does the same thing. Can anyone give me any other suggestions?

Sanyo plasmas have LEDs on the boards that can be used to identify the source of the problem. Are LEDs on any of the boards lit> If yes then which ones? ... Sanyo DP50747 50 in. Plasma TV

Da32m36 I have several blown components on a circuit board in the 'primary power' region of the board. As the components ion the baord only have what the part would be in a Bill of Materials (eg R6102 for a resistor) I don't know what the actual part is so that I may replace the blown components. A sevice manual or circuit diagram is what I need indicating what the parts are.

... Standard (CRT) Televisions

I need to replace a Diode on the Power Supply Board for my HLT6156W Samsung DLP,the part number of the board is BP44-01002C the location of the Diode on the board is marked D805.I need to know specs of that diode ao a part number.Thanks Bob

... Flat Panel Televisions

I have Sony bravia kdl46ex500 I have replaced the main board, backlight board and the power board. I only get a click when plugged in or push the power button. All the parts had been purchased from ebay so I'm not sure how good the part are. At I don't want to purchase for shop jimmy.com till I know for sure.

... Flat Panel Televisions

Convergence issue Can't complete convergence.. Replaced Power Boards, Convergence Boards, 2 RCA manufactured RCA IC's, even replaced convergence chip. Can't move convergence lines.. At this point, anyone interested in parts for this 62# projection TV, email me... Screen and all components are in working order.. Done with this beast!!

... Samsung PCL6215R 62" Rear Projection Television

Need to replace Vizio LCD HDTV model 370VA control board/t-con board but need to install! How do I install the part I do not even know where the part is?

... Samsung LN-S4692D 46 in. LCD HDTV

46vx700u After having the HDMI board replaced by a Conn's "technician" they left off the cover that goes over the SD card slot, usbports and ethernet port and now claim they cannot get a replacement. Doers anyone know of a place to get a replacement?

... Toshiba 46VX700U LCD TV

I have a Sharp LC-19SB15U TV .I was informed that the T-CON board is bad.Looking to buy a board, part # DUNTKE352FM02, reasonably priced ones, $30 to $70, are out of stock.Boards that are $250 to$480 are in stock but very expensive. Does anyone know how to repair this board?

Have you tried ordering one from one of the cheaper sources ?\015\012\015\012Maybe they have a short lead time.\015\012\015\012\015\012 ... Sharp LC-19SB25U 19 in. LCD HDTV

I have a Panasonic Plazma TV, TH-46pz80u is the Model Number and the LED light blinks 8 times. I just need to know which certain board to replace. I have already opened the back of the tv to inspect where each board is mounted. I am having trouble getting the details just for my model type. I am aware that alot of the tv's share the same boards. I just need a little more guidance and I would like to get the troubleshooting spec manuals to refer to for this repair.

Hello,The power supply board is dead, do you know basic electronics' and soldering? Most of the times, the power supply board just have dead leakages gases capacitors.These capacitors always bulges up on it top,or puff up on it top.Replac ... Panasonic Viera TH-42PZ80U Plasma TV

I inherited a Mitsubishi HDTV 1080 Integrated Model # WS-55511. I'm looking to replace the Cloth Speaker Grill because cats got to the mesh. I would rather replace the part. Anyone know where I ca

... Mitsubishi WS-55511 55" Rear Projection Television

I have a baird x47dtv and we turned it on today but had no picture or sound. the blue power light comes on and flickers as it should on startup of tv,however we are still not recieving a picture. i have replaced the psu's approx 6 months ago so i know theres no problems there,but am unsure which part i need to replace as it could be 1 of three things. 1 it could be the main board, 2 it could be the power invertors or 3 the screen. any tips would be helpful

Tried to disconnect first the supply voltage of the inverter board and then turn on the tv. if the indicator stay which mean the inverter board would be the cause of shut off or the tv turn to safety mode. ... Flat Panel Televisions

I have a samsung lcd tv model LNS-4095DX/XAA. I am getting snowy particles throughout the image. The picture looks great except for the pixel looking particles throughout the screen. I have already replaced the power supply due to some bad capacitors. It was alot worse before the new part. Do you think it is the T-Con or main board that needs replacing? I checked all the connections and tried different cables to see if it got better, it did not.

... Samsung LN-S4095D 40 in. LCD HDTV

Toshiba 52hm95 dlp needs color wheel. is it true that color wheel is no longer available as standalne part and entire liight engine has to be purchased? anyone know the approx cost of this part and source of cheap labor to install? tv purchased 5 years ago and bulb has been replaced three times,under extended warraanty. not sure if its wise to invest any more $$ LOve the design and the table?stand can only be used with this model

No it is not true that color wheels for this model aren't sold as stand alone you can find one on E-bay.The color wheel is approx $259.59 US.sorry don't know of a cheap place to install.Hope this helps yo ... Toshiba 52HM95 52" HDTV Projection Television


Try shopjimmy.com who carries almost all the Samsung boards--if fuse right where power cord does come in trouble is right there. ... Samsung Flat Panel Televisions

My Vizio E3D420VX has a cracked screen. Does anyone know where I can get a replacement part for it?

... Vizio E3D420VX 42 Passive 3D LCD HDTV

Anyone know where I could get hold of a circuit board for my Bernette 740E? Mine has died and I'm having trouble getting hold of spare parts.

... Flat Panel Televisions

Can I replace an IC chip on a Hitachi buffer board(part number ND60200-0048) or do I have to replace the entire buffer board?

Replacing the board would be best. You can replace the IC chip but there was a reason the chip burned out. You would need to diagnose the board and find the cause of the short that killed that chip and replace the other parts before you replaced the ... Hitachi P50H401 50 in. Plasma HDTV

Will not power up manually or with remote. Re-set button only produces several clicking sounds and then a similar start up sound, but does not turn on. I'm pretty handy at fixing things and have already disassembled the split cabinet. I know others have experienced the same problem, but I have yet to see any solutions. I would much rather purchase the part needed and replace it myself. Look forward to your assistance, Thanks, Avery

The very first option is to check all your power supply capacitors. They are know as electrolytic capacitors and look like small cans with legs. You will need an ESR meter to find the bad capacitors. Nearly all repairs can be done on this level. Be s ... Flat Panel Televisions

Picture with no sound on Samsung LNS-4692DX. Samsung was of NO help. I followed the excellent instructions posted by fun2 and Ida2 but I did not prepoerly remove one of two orange ribbons on the T-Conn board and when I installed the new Tconn, the right half side of the screen has a green tint that distorts the picture badly. The left side is fine. My questions is does anyone know if I need a new orange ribbon and if so, how do I replace the old one at both ends? Otherwise, is the ribbon fixable

... Samsung LN-S4692D 46 in. LCD HDTV

Is any one know the part to replace to fixed 42lv44oo main board

... LG 42LV4400 42-inch LED TV

Boston Acoustic MCS-95 powered Sub Speaker - no power - no green indicater light. Checked and fuse is OK. Removed amp panel and removed the power circuit board and found the ZD3 diode was fried and has no reading on my meter. Do you know of a replacement part number of the ZD3 diode from Radio Shack?

... Flat Panel Televisions

Hi, I have a Sony kdp-57ws550 that had a 10 blink code. I took the d-board out, r8051 looked burned up, I replaced that, hooked everything back up, turned it on and now it sounds like its coming on, does 4 blinks and turns off. Does anyone know what this could be?

Check IC5101 on the D board vertical deflection has stopped. The 4 blink is indicating vertical deflection has stopped. ... Sony Grand WEGA KDP-57WS550 57" Rear Projection HDTV-Ready Television

Have samsung hcm4216 w/ model code hcm4216wx/xaa that has convergence problemn would like to know correct current complete convergence board part and where i could purchase( I need to simply be able to replace entire component no soldering etc.

Try Partsstore.com for a whole board...\012 \012 ... Samsung HCM4216W 42" Rear Projection Television

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.5508 seconds