Having problems with your Flat Panel Televisions ?

Suddenly my HMDI connection soes not work? Tested cables and they are fine. Component signal from DVD is fine. Imputs are fine- Tested other DVD player and it also no signal- I have two HDMI ports and neither worked. What is up? What can I do?

Answers :

Repair Help & Product Troubleshooting for Flat Panel Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

Suddenly my HMDI connection soes not work? Tested cables and they are fine. Component signal from DVD is fine. Imputs are fine- Tested other DVD player and it also no signal- I have two HDMI ports and neither worked. What is up? What can I do?

... Panasonic TCP42C1 Plasma TV

I have a ws 48311 mitsubishi. it is stuck on 480, how to switch to 1080p? We got a new DVD player, and have a converter box HDMI to component, with component and hdmi cables. we cannot get a visual, no signal from the player. the old dvd player works. the new DVD player is a samsung model # 80-em59c

... Mitsubishi Projection Televisions

My Denon receiver, mounted in another room, has HDMI inputs from my DVD player and cable TV. Signal goes from receiver through HDMI into a signal transmitter and then to the TV via Cat 5 data cable and signal receiver. The signal frequently drops out, and especially if any light switches are turned on/off. Is it likely the problem is the result of an electrical wiring problem, or could it be a problem with the Denon receiver itself?

It would seem that the transmitter and/or the receiver may be causing all the fuss...or the cat 5 is having issues...the cat5 cable may have some defect...try using another cat 5(even if it's 6ft long,move receiver closer to tv/dvd and use transmitte ... Flat Panel Televisions

Hello, I just bought the KDL55EX720 LCD TV a few days ago. I originally hooked a DVD player up to it with the standard AV cords & it worked great. Lastnight I purchased a Blue Ray player and hooked it up with an HDMI cable. When I go to input it shows the HDMI connection, but when I select that connection the screen goes dark as if the TV is off so that I cannot go through the setup process with the Blue Ray player. I reset to the factory settings, but having the same problem. I have also tried

... Sony 55 KDL55EX720 3D LCD TV

What might be causing my lg 50pk540 to not recognize signals from my cable box or blu-ray player in two of the three hdmi ports?

... LG 50PK540 50 in. Plasma TV

I have a Sharp Aquos 40E67UN. We came home yesterday and although the TV turns on and our directv box turns on, the tv just has a blank screen where you can go to different inputs, but none of the hdmi inputs work. I also tried hooking in my DVD player via 2 different hdmi cords to make sure that it was the direct tv box that was the issue, but the DVD wouldn't work either....just a blank tv screen (but its on). Any ideas on what could be wrong? I can change the channels, the remote is still

It's possible that you have a faulty component on one of the circuit boards inside your tv.\015\012\015\012It sounds like your backlight is working OK since the screen is lit up despite having no video so the fault is either with the MAIN ... Sharp Aquos LC-46D62U 46 in. LCD HDTV

I'm trying to feed a TC-L32C3 from a DVD player. Connecting with a coax sometimes works but most of the time I get a "No signal" message. With HDMI I can't choose HDMI1 - it's greyed out. No picture or error message with HDMI2. TV and DVD player worked OK before I got a PVR

... Panasonic 32 TCL32C3 32 LCD TV

My polaroid fxm-1911c picture is distorted, sound distorted with loud buzzing when I try to utilize the tv signal input jack, also the dvd player doesn't work

Looks like there are some partial defects in the TV and might need attention of a qualified service technician. Anyhow, make sure that the input cable, RC jacks and sockets all do not have any loose contacts. Go through settings and ensure that eve ... Polaroid FXM-1911C 19 in. LCD Television

When I turn on the T.V. the Sounds works for about thirty seconds then stops but the picture remains the same. Also My DVD Player never has sound, I have tried both HDMI Hookup and AV Cables. I Have

Check and replace its audio output circuit board. ... Flat Panel Televisions

Foxsat-HDR 100GB, 2Yrs. old. Problem--HDMI Feed to LG32LC2RR Television---Audio OK but NO Video--OSD--"No Signal" message. Check-- HDMI Feed from DVD Player-- Audio and Video--NO Problem. Check-- SCART Feed to Television NO Problem. Check-- Changed HDMI Cable--- NO Cure. Regards, Ray Parnell.

... Humax Flat Panel Televisions

Just got a RTB 1023 (RCA DVD and Surround Sound System). The cable box is connected to the TV and the RTB 1023 is also connected right to the T. Both connections are with HDMI cables. No sound from the TV or DVD players will play through the surround sound speakers. Just a constant buzzing noise. Any suggestions to fix this issue?

... Flat Panel Televisions

24 inch venturer lcd tv dvd. only use dvd player as no aerial. Been fine for two years but now says 'no signal'. Any ideas?

... Venturer PLV31220S1 22 in. LCD TV

My Sceptre 40 just shows very faint picture..is very dark. Before it showed a faint no signal (from Uverse) I tried from dvd player also faint with no signal

The set may use back lights inside to light the screen which if out will cause this---either the voltage source for the lights or they are not being turned on by the set. This would be the light source for your picture. ... Flat Panel Televisions

Only one of the HDMI ports will not work on Westinghouse. I have cable running on composite and Apple on HMDI 2 the HMDI shows no signal. Wanted to use it for my DVD player

... Westinghouse TX-42F430S Television

My rca flat screen was working fine than all the sudden it went blank and started flashing unusable signal. I get a picture on a couple of channels but with no volume. I then also get no pic with my dvd player and sound only. Im so confused because I was sitting there watching tv then all then sudden nothing works correctly.

Unplug the set for a while, also a cable or sat box or home receiver and power back each to allow them to try to reboot. ... RCA Flat Panel Televisions

I have Sanyo lcd model32xa2.the panel resolution is1366&768.There isno hdmi input inthe tv how do l get Hd. Signal. If I connect Hd dvd player or Hd receiver.Please answar

Component inputs (blue, etc) are rated upto 720p, OR look for a DVI input (thin and white)\015\012\015\012\015\012These will be your only two options with a no HDMI inputs!\015\012\015\012\015\012Please rate if thi ... Flat Panel Televisions

Sylvania hdmi I do not see an hdmi outlet on this tv, does this mean it is only compatible with old DVD players? Is there such a thing as a hdmi converter that will let me use and hdmi DVD player on this tv?

... Sylvania 6620LCT 20 in. EDTV-Ready LCD Television

I have a VSX-920-K Pioneer receiver, a DV-220KV-K Pioneer DVD player, and a Sony CRT TV with no HDMI input but only a video component input. I connected the dvd player to the receiver using an HDMI cable (for audio) and a video component cable (for video) as shown in the receiver's manual. I connected the TV to the receiver using a video component cable. I have set the HDMI Control option of the receiver to "OFF" to enable the selection of the HDMI input in the Input Setup Menu of the receiver b

... Pioneer Flat Panel Televisions

Philips 37PFL5603D/10 tv, connected to Humax HDR-Fox T2 recorder. We do not have the HD signal yet, but due in June this year. Problem is with the HDMI connection, mostly does not work, sometimes green picture, no sound. Also does not switch automaticaly When box is switched on or off. Will only switch properly when a scart lead is also connected. You should not have to use a scart, when you have HDMI. We need the HDMI to cope with the new digital signal when it comes. Have switched Humax

... Philips Flat Panel Televisions

I have an Emerson LC401EM3F which I purchased 2 weeks ago. When I connect my dvd player to it with HDMI I get picture but no sound. When I connect my laptop using HDMI it won't even recognize a connection. I have 2 other TVs which I connect to a computer using HDMI without any hassle. I have verified that the dvd player, cable and computer work with other TVs. Any suggestions?

... Flat Panel Televisions

Sanyo TV (dp32648)+tv can't find HDMI signal from BluRay player

... Sanyo DP32648 32 in. LCD TV

Sir, I have a Toshiba CT-90159 home theater> Since yesterday I am getting a ping color on the screen.I put it under the HDMI mode (06). I am using a Philips DVD player. Till yesterday I have been able to watch DVD player on this home theater. I have changed a new HDMI cable. Please mail me how to resolve this problem. Thanks Sridhar

... Toshiba Flat Panel Televisions

Dvd connection we have our direct tv cables hooked up correctly we believe, because we get the signal just fine. When hooking up the A/V cables from the DVD player to the other ports available however, it doesnt pick up the signal after we change the Source on the TV. So basically, everytime we want to watch a dvd, I have to unhook the direct tv a/v cables and hook up the dvd av cables in the same ports. It works just fine then. But we would love to not have to go thru that process everytime.

Check the connection wire for any internal conductor break. Check it with a multimeter. ... Sceptre X400BV-FHD 40 in. LCD TV

The input dvd screen says no signal and the DVD player doesn't seem to have any power.

If it is in warranty return it---parts for the DVD unit are not available--they would have to replace the entire DVD unit inside the set. ... RCA 32LA30RQD TV

I have. Technika hd tv with built in DVD player but the DVD player isn't working I click on DVD an it says no signal won't even let me eject the disk need a solution please.

... Flat Panel Televisions

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1154 seconds