Having problems with your Combination Televisions ?

VOLUME STUCK I have the TV hooked up to my DirectTV cable box using the yellow, white and red audio/video wires (the cable jack on it is broke). I turn on the tv to find that the volume is stuck. When I try to turn it up or don, the volume bar comes up on the tv, but nothing happens. When I jiggle the wires, I notice that the right speaker goes in and out. How do I fix this?!



Answers :

You use auxilry port in your tv as volume problem volume out from direct TV cable bos insert in tv auxilry port

Repair Help & Product Troubleshooting for Combination Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

VOLUME STUCK I have the TV hooked up to my DirectTV cable box using the yellow, white and red audio/video wires (the cable jack on it is broke). I turn on the tv to find that the volume is stuck. When I try to turn it up or don, the volume bar comes up on the tv, but nothing happens. When I jiggle the wires, I notice that the right speaker goes in and out. How do I fix this?!


You use auxilry port in your tv as volume problem volume out from direct TV cable bos insert in tv auxilry port ... Panasonic PV-DM2799 27 in. TV/VCR/DVD Combo

When watching tv the volume suddenly goes off, then when i try to turn it up with the remote nothing happens until I go and shift the tv around. When doing that, it makes a sound(that comes out of the speakers) as if there's a short somewhere, then the volume comes back on. what do you think the problem could be?


There might be some loose solder terminals at its audio output stage. Check it. ... Mitsubishi Flat Panel Televisions

I have an RCA rear Projection TV model # p60812BL manufactured in 1998, no sound is coming from the tv when watching cable TV via a digital box. When the mute button is pressed and unpressed you can hear the sound clicking on and off and same thing when turning the volume up and down but nothing comes out when watching cable tv. However when the game console connected via AV jacks is played the sound is perfect. Please help


It depends on how you have the box hooked to the tv, is it via cable (co-ax) connection or rca (red yellow white) cables ? You may have the audio hooked wrong or it may be a blown input in which case switch to a new input on the back of the tv (possi ... RCA P52926 52" Rear Projection Television

My LC-37SH20U was working fine. Then, when I gor home from work and turned it on, I heard the usual volume and the "click" from inside, then the picture comes on. After only 4-6 seconds, the screen went black but the volume stayed for about 3 seconds. Then I hear a click again, and evrything goes off, but the power indicator keeps flashing green. When I hit the power button both on the set or on the remote, nothing happens. model are sharp LC-37SH20U


This is a fault solution which can be checked and corrected by you assuming that there is no component failure. There is a high possibility that the components over a period of heating and cooling, tend to bring on a problem of dry soldering ... Sharp LC37SB24U 37 in. LCD TV

My Panasonic plasma screen TV is stuck on mute? I saw MUTE show up in white letters on the top right corner, but I didn't press mute... now i can't get the sounds to come back on. I've restarted the tv, and the cable box, and tried turning up the volume.


Did you press the mute button again, some TVs use this method. ... Panasonic 50 in. Flat Panel Plasma HDTV

My cs-40505 1995 wont turn on, the power supply from the wall is good. When I push the power button on the the tv nothing happens. Also the remote is stuck on cable.


... Mitsubishi CS-40505 TV

Hi. My Sony KDL32EX400 started to have unusual problems few months ago. Channel, volume, menu, setting, controls stop functioning. (The little green led is flashing when trying to switch channels or control volume, but nothing else happens.) The only function works is the power. After I turn it off it shuts off but sound remains for another 30-40 seconds. Also sometimes display info remains on screen after TV turned on then the same problem happens, as mentioned above. I have to note that it do


Hi,Does Standby light flash/ blink on tv when it does not show picture or any display in screen?If standby light blinks, please count how many times it blinks after three seconds long pause to diagnose possible problem in tv.And if ... Flat Panel Televisions

Hi, so I was told to replace my psu by a tech because of what the service manual said. I replaced it and its doing the samething. No picture but sound. All of the readings are coming out correct. I tried to do a reset on the logic but but nothing happens. I can do a reset on the main input board but nothing happens after it resets the TV. The fan on the main input board does not come on at all. Please help. I can control channel, source and volume but still no picture.


This no picture but sound issue is not caused due to power supply. The loic control board is also ruled out because all the other functions are operational. That leaves us with two possibilities 1) Sustain board(S) or 2)Buffer BoardsIt is not p ... Samsung HP-R5052 50 in. Plasma HDTV

I have a Philips 42pf5321d/37 Plasma tv. When i turn i on the green light comes on in the bottom left corner but nothing happens. No picture no sound nothing. I opened the back of the tv. When i turn it on the led's light up but then it clicks and the two on the main board turn off. Any Ideas


... Philips 42PF5331 42 in. Plasma Television

My LG 52sz8r tv wont turn on. It suddenly stopped working. I presumed the bulb needed replacing as the bulb light was on before it stopped working, but did not come back on. however after replacing the bulb the problem remains. After pressing the power button the red standby light comes on, but when i try to operate the tv the standby light turns green and blinks about every second and nothing happens. I can hear a small click in the unit a few seconds after trying to turn it on. any suggestions


... Flat Panel Televisions

My hisense 32 in hdtv iv had for almost a year has worked totally fine, than today we moved it to a diffrent spot in the room turned it and cable box on for bout 15 mins and come back in room after wiping it down with a paper towl with windex sparayed on towl and it is off and will not turn on or no lights nothing or remote tried fuses n plugs everything on cable box works just not the tv no power. Is there anything I can try or see to do why would out of no where it just die like this! Makes no


Check to see no master power button on rear, other than the cord not being in all the way the set would have to be opened to see if a bad fuse or not...... ... Flat Panel Televisions

Display Doesn't turn on anymore. When i connect it the blue led light on but nothing happens when press the power button, just start to blink the blue led and then stop. This happened after i notice some read dots and lines coming and going in the top half of the screen. Any idea of whats happening or a possible solution??? Its a samsung 42" plasmas with like 2.5 years.


... Samsung PS42P2S 42 in. Plasma Television

I was watching a dvd on my vizio tv when suddenly the sound went off and was replaced by high pitched noise. I turned it to the cable tv and the same thing happened. Any suggestions?Ive tried turning it off, unhooking all the wires and turning back on after 30 min, still the same thing. Thanks


... Vizio Flat Panel Televisions

X322BV-HD*WXC100 Problem: TV will not power up. Red indicator light is evident and turns blue when you use the power button on the remote or the power button on the TV. However nothing else happens. The screen does not light up nor can you turn it back off with the remote or TV button. I tried on several occasions to remove the power cord and plug it back in again with no success. The red indicator light comes back on and turns blue when I use the power button on the remote or the power button


Warranty is usually 1 year parts and labor. Contact mfc for warranty service. likely main board. ... Flat Panel Televisions

X322BV-HD*WXC100 Problem: TV will not power up. Red indicator light is evident and turns blue when you use the power button on the remote or the power button on the TV. However nothing else happens. The screen does not light up nor can you turn it back off with the remote or TV button. I tried on several occasions to remove the power cord and plug it back in again with no success. The red indicator light comes back on and turns blue when I use the power button on the remote or the power button


... Flat Panel Televisions

Speakers volume When the volume is at a higher setting, the sound will suddenly drop in volume for a long or short period of time depending then suddenly go back to the setting it was at then drop down again. It is very consistant and happens every time we use it. I don't know if they are blown or its something with the wiring. I opened it up and cant seem to see the problem. We got it used from our neighbors without a manuel. So I am stuck. HELP!


... Mitsubishi VS-45603 45" Rear Projection Television

I have a 42 inch Hitachi plasma tv that is making a very loud static noice coming from the internal speakers. It stays at a contstant very loud volume unless I completly mute the tv or turn the volum


Based on what you have tried if a buzz or loud static via the speakers you have something wrong in the audio output circuit of the set--problem here is that circuit may be part of the Main board that processes all signal---a look inside---following t ... Hitachi P42H401 42 in. Plasma HDTV

I have a plasma LG 42PX4DV-AA tv which wont turn on, i press the stand by button and the green led light comes on but nothing else happens any ideas thanks


... LG 42PX4DV 42 in. EDTV-Ready Plasma Television

Three days ago my sony TV (about 8 yrs old/HD tube type TV) would not come on. It made the sound like it would turn on, but nothing happened except the stand by light blinked 6 times. Today it turned


... Sony Standard (CRT) Televisions

I am having a problem with RCA L37WD12 37 Inch HDTV LCD TV...when I plug it in the red light comes on but when I either push the on button or remote the red light blinks, and turns off and nothing else happens. Some times the it stays lit for 3 seconds and then turns off. I have looked inside and replaced a couple of capaciters, but still the same results. Thanks.. Tim Mcneil [email protected]


... RCA L37WD12 37 in. LCD HDTV

We bought a new Bush 42 Inch 3D TV about 4 weeks ago and came home today to discover it would not switch on. To begin with the red light was on but the remote control was not doing anything. When we turned the TV off at the socket and then turned it back on again the red light did not even come on and we still cannot watch TV. Nothing happens when we push any of the buttons. We have tried the TV at different outlets and have changed the fuse in the plug. Is there some way we can remedy this?


... Flat Panel Televisions

When i turn tv on the blue light comes on at the bottom signifying its on but there is nothing on, when i hit the power button nothing happens and the blue light just stays on all the time when its plugged in


I see so many here with no sound/nopicture issues:ISSUES: 1. IF sound main fuse/s are good.2. If no power or standby check main fuse, standby power supply and any signsof damage you can see---burnt parts etc.3. almost all thes ... TCL L40FHDM12 40 Class LCD HDTV - 1080p, 1920 x 1080, 16:9, 60Hz, 8ms,

I WANT TO KNOW WHATS GOING ON WITH MY TELEVISION. WHEN I TURNED IT ON NO PICTURES WILL SHOW ON SCREEN BUT THE SOUND COMES ON THOUGH. I TRIED TURNING IT ON AND OFF BUT NOTHING HAPPENS. I EVEN UNPLUGGED IT TO SEE IF IT WILL HELP BUT STILL THE SAME. THE POWER BUTTON ON TV KEEPS BLINKING NO MATTER WHAT. I JUST WANT TO KNOW WHAT I SHOULD DO?


You may need to replace the bulb ... JVC HD-56G787 Television

I have a Pioneer Plasma with a separate media receiver. I just changed cable companies. In setting up with their "box", my receiver when trying to turn on just flashes red/green. Can't get it to work. The tv shows a picture (3/4 screen) and somewhat is somewhat "stretched", but NO VOLUME! Can anyone help? The new cable company says there is nothing they can do. They think my tv is incompatible with their "box"


Hi,\015\012\015\012Please let me know what cord are you using to connect the cable box to your TV?\015\012\015\012Jdvillanueva ... Pioneer PDP-4350HD 43 in. Plasma Television

MODEL 50V500, NO PICTURE OR SOUND, REPLACED BULB, WHEN TURNING ON BLUE POWER BUTTON BLINKS AND NOTHING HAPPENS, THEN WHEN I TURN TV POWER BUTTON OFF THE RED LAMP BUTTON COMES ON


... Hitachi 50V500 50 in. HD-Ready LCD Television

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1972 seconds