Having problems with your Projection Televisions ?

The tv just turned off on its own this morning and will not power back on...the power button is blinking 3 times when we push the power button..either manually on the front of the tv or thru the remote ..please help



Answers :

3 Blinks means Convergence -replace Both STK ICs they are big black ICs and will have Part number on them STK392-110 Mats Electronics sales ICs 1-800-628-1118

Repair Help & Product Troubleshooting for Projection Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

The tv just turned off on its own this morning and will not power back on...the power button is blinking 3 times when we push the power button..either manually on the front of the tv or thru the remote ..please help


3 Blinks means Convergence -replace Both STK ICs they are big black ICs and will have Part number on them STK392-110 Mats Electronics sales ICs 1-800-628-1118 ... Panasonic PT-51HX42 51" Rear Projection Television

TV has worked just great since purchased in 04. Sat down this morning, grabbed the remote and nothing happened. I replaced the batteries in the remote, tried it again and nothing. I tried the manual power button on the front of the TV and still nothing. I tested the power outlet and it works fine. As I plug the TV in, I hear a soft click as if it is trying to power on but still nothing happens. I pushed the reset and it makes a soft click but still no picture or sound. Could you possibly help


Hi. This is an all too often occurrence. The TV's manufactured in the earlt to mid 1990s relied on an inferior set of capacitors in the power supply and mainboard components. They should have lasted about 25 to 30 years, but most are on ... Hitachi 57F500 57" Rear Projection HDTV-Ready Television

When I turn my TV on it will turn off by itself in about a minute and the red power light on the front of the TV will blink. The remote control nor the power button on the front of the TV will turn it back on. I have to unplug the TV for a few seconds and plug it back in to make it come on. It usually takes two or more of these unplug and plug back in sessions to get it to stay on. Some times it takes up to fifteen before it will stay on. Please help.


This is what 's happening: you give the command to start the tv so the power source is initiated and starts to deliver power to the rest of the components of the tv; one of these components has aged and it requires much more current than normal to st ... Toshiba TN55V71 55" Rear Projection Television

Locked out front control panel while in menu. Now I can't unlock front control panel and I don't have original remote control or owners Manual. Help me please. The front panel is all I use for DVD pla


Hi there, if you know what model it is you can do a google search for the owners manual. There should be a sequence of buttons you can push or hold to reset to factory/default settings. ... Projection Televisions

My seiki tv shut off while i was watching it and it wont turn back on.... the red standby light and front panel lights work so the tv is getting power however it will not turn on with the remote or the power button in the front... please help


Someone is going to have to open it and examine the power supply board in the set first for signs of damage or puffed up caps and then check for various voltages, This set is likely to be a problem for parts as all brands can be as they only sell ci ... Seiki Flat Panel Televisions

My panasonic th-42ph11uk isnt powering up.. One day it was working and the next dead. Can pushing the power button too hard make it not power up. Like some electronic equip does. I also used the remote to try to power it up and nothing. Please help I Would like to watch tv sometime on it!! Power supply??


Maybe the power supply is the problem of your television.Either it is loose connection in power supply circuit.Its need to resolder the loose connection and cold solder of the power suply circuit.. ... Panasonic TH42PH11UK 42 in. Plasma TV

My panasonic flat panel tv with model no. TH-L32c20x has a power problem.. i push the manual button on tv side,the red light is on..then second is the remote power,the green light come and blinking 20 times,then turn to red light blinking slowly, the power not goes in, i unplug and plug again,try the same way its not working..


... Panasonic Flat Panel Televisions

Hello i have an element 37'' tv and i have to unplug the tv several times just for it to turn on. There is a steady red standby light on but when you try to hit the power button it doesnt respond via remote or on the tv panel itself. The only way it will turn on is from a constant plug and unplug of the power cord. Please help?


There's a good chance you have failing electrolytic capacitors either in the power section or the inverter section or both.Any caps in these sections that look bulged at the top, or bulged/leaking at the bottom need to be replaced.If you ... Element Flat Panel Televisions

Onn lcd32angel powered off for about 5 hours. when powered back on the standby light is flashing. tv will not turn on. dont have a remote or instruction manual. please help!


... Flat Panel Televisions

Mitsubishi WD-73735 will not turn on and there are no lights on front. The power supply was replaced, and is brand new. I fix HDTVs, and have had very little problem resolving other issues with other TVs. This one is strange. Need help, please. When I plug it in, you can hear the PS get power, but nothing turns on. Tried the 'Menu' and 'Input' combination....nothing. Tried plugging it in, with the 'Menu' button pushed...nothing. I can hit the 'Reset' button on the


If you have no lights come on the front of TV, you definitely have a power supply issue. Don't know what previous servicer did, but I would be looking at ALL wires & connectors. ... Mitsubishi WD-73735 Television

Emerson PL-P42W-10A plug it it and the relays kick on and on the front of the tv the red power light blinks 5 times. I see where this may be the main board but could also be the power supply. Please help


... Flat Panel Televisions

While plugging in a D.V.D.s connection the unit stopped responding to the remote control or the manual controls under the front panel. It will not respond to anything except pulling the plug out of the power point. There are two lights on the front of the unit: a green one under what looks like a clock symbol and a red light on the right side of that.Any help would be appreciated!


Hello\015\012You haven't specified anything about the device you uses. Without its brand name and model number, how can I powt a solution to you? Please provide these to me by FixYa please. ... Flat Panel Televisions

My LG 42LF2500, when i pushed the remote to turn on the tv, the stand by light turned off and on again,(as usual), but after the third time it turned off and the tv does not turn on. Remotely and manually. I changed the power supply board, but nothing. Is it the AV board, or the controller?


... LG 42LF2500 42 HDTV LCD TV

I also support fixya i have a polaroid fla3232b which wont let me use remote or buttons on side other than power button on tv...it said it was locked, but i dont know how to unlock it and the manual doesnt say either...was in storage for a week, before that we only used av input...i think before we bought it 2nd hand it used to be in a hotel. Help please as polaroid cant help me at all.


... Flat Panel Televisions

HI I have a Panasonic Blu-ray Disc Home Theater Sound System Mod SC-BT735 which works fine manually but the remote will not work although the DVD is receiving the signal. Every time that we press a button on the remote we get a message on the display which reads SET 2. Could you please help with this problem. Pete


That is because the remote control is set to remote number 2. Set it to remote number 1 and all will work or set the switch on the Blu Ray to number 1.Hope that helps. ... Panasonic Flat Panel Televisions

I have a 37 inch lcd hd tv made by Curtis model 3717A. I bought the set about 18 months ago. When I attempt to turn the set on either manually or by remote, the on/off light begins flashing but there is no picture. After leaving the set unplugged for several hours I was able to turn the set back on. Since that time I stopped using the tv's on/off, instead just using the cable box. My cat stepped on the power strip yeserday and now the tv will not power back up. Help.


... Flat Panel Televisions

My panasonic 1080i will not turn on. Hit the power button and the light starts flashing green but nothing happens. After about 20 seconds or so the light goes back to red and flashes. Nothing works on the remote now. I bought this from Sams club as a close out as it was the last one (floor model) and did not have the manual. Have not seen any solutions to this problem as of yet. Please Help! W have not TV and are paying for service now.


... Panasonic PT-50LC14 50" Rear Projection HDTV-Ready Television

I have a viewsonic N3760w tv and it takes a long time to turn on. I will press the power button on the tv and remote, and it takes 2-5 minutes to turn on. What is the problem. Please help.


It may be a bad solder joint on the power supply board, it may also be a failing capacitor on the power supply board, It would require the board to be removed from the set and inspected visually as well as with a capacitance meter. Inspecting the s ... Flat Panel Televisions

My 32LG350 wont turn on. I just pluged it for the first time i bought it like a month ago. it was working but suddenly it turned off by itself and wont turn on either by pushing the TV on/off boton neither pressing the remote boton. The red light keeps going on and off. Help me please


Try unplugging the the TV from the power outlet for 30 seconds to a minute and plug back in again. Try to turn on again. Some TV's have to be in a "ready mode" to operate by remote - so besure it is in that mode - or use the power button on the TV. ... LG 32LD350 32 in. LCD TV

I lost the remote. the amber light is on. when i push the power button the amber light turns green for a second and then right back. help me please!


Make and model? Unplug it for about an hour to let it reset itself first. If it still does not work then more likely it will need boards repalcement.\012Right now it may have gone into safety shut down due to sensing of shorted circuits, or it ... Flat Panel Televisions

I have an VHS/DVD Orion Tv, no remote, and I turned it off the night before, and now I turned ir on and its stuck on a glitched blue screen, wanting me too choose the language, and the buttons on the front panel dont respond besides the power. Please help


Your best bet is to go and buy a universal or programmable remote to operate you TV. ... Combination Televisions

I have a sony TV model KV-28ls36u, the problem was, when power is turned-ON, the LED blinks 11 times, what would be the best solution for this and where can I get a service Manual. Please help. Thanks


Usually after 4 or 5 yrs EHT ( transformer that supplies voltage to tube ) becomes weak - then TV won't get ON.. means no picture no sound but LED blinks - in some TVs along with EHT 1 or 2 components like resistor, transistors, etc will also gets ... Sony FD Trinitron WEGA KV-32FS120 32" TV

I have a toshiba tv model: 32AV500U. It would not power on using the remote control so I bought a new original remote: CT-90275, and still it will not power on from the remote. Can you please help me fix this problem. Please advice. Thank you very much.


... Toshiba 32AV500U 32 in. LCD HDTV

Hi Viewsonic, I have a N3751w ViewSonic LCD TV Model Number: VS11405-1M I am having a problem with changing the source. The TV will only remain on the TV setting which only allows me to use cable. I can not use any other device that is connected to the TV. The little source window shows up from time to time on the TV screen when I have not pressed anything on the remote. I can not turn off the power to the TV without disconnecting the power from the electric connection. HELP HELP HELP!!


Hi, well unfortunately there is no Reset Button as such, the TV is reset in the basic sense when turned OFF and completely so when removed from the Supply, ie: Withdraw the plug from the socket. \015\012Now if this doesn't work, then most likely you ... ViewSonic N3751W 37 in. LCD Television

Hi...I have a Sony WEGA KV-29M91 that is very difficult to turn on. When I try to power it on the stand by timer light blinks 6 times then stops the repeat for another 6 times. Aventunally the TV does come on after repeated pushs of the power button. What's problem? Can some please tell it this something that I can repair or do I need a service person...Thank you in advance...Amir


... Sony WEGA® KV-XR25M80 TV

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.2453 seconds