Having problems with your Flat Panel Televisions ?

I have just bought the Panasonic DMR-EX99VEBK 250GB HDD DVD/VHS Recorder with Freeview+ and when I try to set it up , it doesn't seem to communicate with the television Additionally the unit screen displays please wait. After several minutes the screen displays HDDERR and the dvd tray opens I have tried this several times and there is no evidence of auto setup Hope you can help



Answers :

Repair Help & Product Troubleshooting for Flat Panel Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

I have just bought the Panasonic DMR-EX99VEBK 250GB HDD DVD/VHS Recorder with Freeview+ and when I try to set it up , it doesn't seem to communicate with the television Additionally the unit screen displays please wait. After several minutes the screen displays HDDERR and the dvd tray opens I have tried this several times and there is no evidence of auto setup Hope you can help


... Panasonic Flat Panel Televisions

I have Vizio XVT3D474SV I bought a year ago, in the last week while watching TV, the screen start to flash, display becaome white with 3 black lines and after a while it becomes black (the all time the sound stay as normal). while looking inside I see the backlight flashing till the screen becomes dark (than I do not see any light inside). After turning off and ON the TV several times I get back normal pictures but the same phenomenon comes back in few minutes. I checked all 8 micro fuses I have


When the picture is dark, show a torch light on the screen from a safe distance. If you can see the picture, the backlight is the problem. Anyhow, it is better to show it to a qualified service technician. ... Vizio XVT3D474SV 47 in. 3D LCD TV

Hello, I have a panasonic DVD recorder DMR-EX78. It has just started flashing error U61 and U88.The system seems to be making loading noises from the disc drive area and the system recovery message on the tv screen says it is complete, yet the system still shuts itself down and then repeats the errors when started up again.The whole time this happens the tray is closed and does not open at all and there is no disc in machine.The LCD display also goes dull and then dissapears, as if in a safe mo


... Panasonic Flat Panel Televisions

Error U61 on DMR EX95V. Message on screen says Enter on remote; DVD disc tray opens. Turns off. When I try and turn on again, eventually U61 reappears. I've also followed the manual with the same result. Does it need repair? There is no response from any buttons. Clock displays time when machine is in standby mode.


Hello,Obviously, it needs to be repaired.The problem is either a power problem or a software problem.In the case of power problem, a defective control/motherboard board in the unit can cause it to display the error ... Panasonic Flat Panel Televisions

Dear Sirs, Recently, my Sharp dvd-video combi player has been encountering some problems regarding the playing of dvd's. When I watch a movie, in several occasions the movie will freeze up. And for exactly one minute the dvd player will make strange sounds, after which the movie will continue. This happens quite often and is always exactly one minute. For example: the movie freezes after having played for 10 minutes and 10 seconds. The time played on the dvd player will show as 010.10


The DVD unit in your sharp is a self contained unit. IT is only repaired by replacing the DVD as a assembly. the cost of replacing may exceed the cost of purchasing a new one. \015\012 The most likely cause of your problem is in the brass gear ... Flat Panel Televisions

While re-setting the Display function it was accidently set for PAL viewing instead of NTSC. The image is now rolling vertically on the NTSC TV screen. Now, I cannot re-set the display functions because I cannot view the steps while the screen is unreadable. The manual does not supply a step-by-step link. Unplugging the player does not help. Inserting a standard NTSC DVD does not help. The menu cannot be viewed in order to clear it. Help!


Hi hrosenelp,\015\012\015\012There's no other way to get it back to NTSC mode but to access the set-up. Your digital camera will help you see it clearly. While in the set-up mode, take a picture of the screen(TV) for every command that you will ... Flat Panel Televisions

I have the samsung LN52A550. When I turn the tv on a blue screen appears. I tried changing the source with the menu button but does not display anything. The TV is about 2 years old. The sound works. When I try a different input(dvd player) same results(althoug I cannot change ths source because the menu does not display). The dvd is attached via a three cable. The directtv is attached via hdmi cable.


Try thisMethod one- with set on, hold down the exit button on the remote for 10 seconds. It will bring up the warning it will reset to the defaults it had when removed from the box and powered up initially. in the warning box it will show the c ... Samsung LN52A550 LCD TV

I wanted to play movies from my USB flash memory stick and plugged it on our DVD player (sharp ht-da641pa). i played around with the display resolution and put it in 1080. now we cant even use the dvd player cause on the screen, it always say NOT COMPATIBLE FOR DISPLAY or something like that. Im trying to correct it but the same message appears. please help. thanks.


... Flat Panel Televisions

Today I bought an Alba 16" HD Ready Digital LCD/DVD Combi. The TV has set up perfectly and I have set up the DVD function. But on inserting a DVD disc the screen displays "loading" for a few seconds then the display reads "open" and the disc is ejected.


The mechanical parts of the tray assmebly of the DVD player is malfunctioning. You see the tray lowers the disc for the laser that passes through the lens to read it. When this mechanism malfunctions it wont lower it sufficiently and hence the disc i ... Flat Panel Televisions

Can you help me with a new 32 inch Philips flat screen TV that I cannot get my DVD to indicate a picture, yet I do get audio. The model is 32PFL3505D/F7. I have downloaded the latest software release version, ZPBF2QA_078_0_3202, and still same results. The DVD player is an LG Brand, model DV172K. I have tested that on another flat screen TV and it works fine, yet with the Philips TV I just get audio and no video, and have tried several ways to hook up the wires. Still all same results. It jus


... Philips Flat Panel Televisions

Vizio VW42L HDTV. I lose audio and video after several minutes but the power light remains on. If I turn power off and on right away, the screen flashes and then nothing. If I wait awhile, I get audio and video for several minutes then the same thing happens. I looked at the power supply board and it doesn't look like any of the caps are bulging.


Please replace power supply board that seems defective and causing problem.Required board would be available in shopjimmy.com ... Flat Panel Televisions

I turn tv on, the status light flash really fast continous, screen slowly starts to light up . I can see it getting brighter, the introduction screem Mitsubishi Electric Welcome screen displays, green light still flashing and then screen shuts off green light continue to flash for a few second then stops and tv is has shutdown. The process is about 30 to 35 seconds. scince 1/24/11 Tv has been starting up this way, but it would eventually turn on after several attemps. Know on 1/28/11 Tv would no


... Mitsubishi WD-73737 73 in. HD-Ready TV

TV turns itself off after about 5 minutes (green light remains on). I can turn off the TV and turn it back on immediately, however, the TV turns itself back off after a few minutes. It started turning off itself off after displaying harizontal shock waves like lines on the screen that got progressively worst. Now there is no line, just powers off. Once turn back on shows great for about 5 minutes then clicks off (no picture or sound) with green light still on.


Check and make sure your fans are working and there is sufficiant cooling to the back of the set. Sounds like it is overheating and going into protection mode. ... Mitsubishi WS-65513 65" Rear Projection HDTV

I have a DP46848 LCD HD TV, over a year old. The picture appears to be made up of several individual panels, maybe 12 or 16. Anyway, after it has been on for 5 or 10 minutes, parts of the picture get darker. No gone, can still see it, but very dark. Seems to be the bottem 2/3 or 3/4 of the screen and only the left 2/3 most of the time. This comes and goes for maybe 1 or 2 minutes, then it is OK from then on. It will occasionally do this again later, again for a minute or 2, but normally just the


Hi crwalke,\015\012\015\012This symptom indicated of bad filter electrolytic capacitor in the output of the power supply feeding the LCD controller board and the inverter boards.\015\012\015\012This capacitor i ... Sanyo 42 in. LCD TV

Accidentally pressed DVD Setup while DVD was playing on my 16" Daenyx TV/DVD combo . Now DVD is stuck and No Signal message displays on screen. Walmart 4 year protection plan ended last month.


... Daenyx Flat Panel Televisions

My pioneer plasma screen turns on, but gives a caution screen which says "starting up. Please wait." in the corner of the caution screen it says Plasma Display. The caution stays on for a minute, then the tv turns off.


... Pioneer PureVision PDP-5050HD 50 in. Plasma HDTV

Toshiba 23HLV87. DVD Player works and plays well on screen. When TV is hooked up to cable screen is black, no sound, no picture. I have checked the input and all is correct. Display of channel and


... Toshiba 23HLV87 23 in. LCD Television

I have a 32 inch RCA LCD TV. when I play a movie, every 2=3 minutes to goes back to the blue screen, and blinks a few times then goes back to the movie. Its with every movie and I dont think it is my dvd player because I had my dvd player hooked to another tv and all my movies played fine. Help!


Probably the Controller unit for the TV. Try hooking it up through a different connection type e.g. HDMI, component. See if that fixes the issue for the time being. If it dies then those ports you used previously are malfunctioning. ... Flat Panel Televisions

I have a Trutech 7'' lcd space-saving kitchen tv and dvd. The radio and dvd work fine but the tv doesn't work. When I turn it on I get a blue screen with the channel 2 in the top right corner. I have tried to reset the unit and autoprogram. I have lost my instructions to this and don't know if I am missing something. Although we have had this unit for several years, this is the first time we have tried hooking up the tv.


... TruTech PVS31170S1W 17 in. LCD Television

I have had this model for over three years without any trouble. I recently added an LG Blu-ray player via HDMI connection. AlI seemed well for a couple of weeks, then one evening while watching a DVD the screen displayed multi colour narrow vertical pinstripes. I turned the television off and on and all seemed well. The next day when I turned the television on the same problem occured, now the set just just starts with this problem and the screen fades to a dark colour. The audio is fine


Hi William,\015\012\015\012Vertical colored lines is very common problem in plasma tv. Plasma is the most hard working type of tv nowadays and most of them encountered problem after 3 years of service which is caused by overheating of the board ... Flat Panel Televisions

My LG led has had several problems, it started out with the left half of the screen flipping as if viewed from a mirror with the right part of the screen normal. After that, it displayed vertical colored lines (blue, yellow, black, white, etc) which went away and now it shows a vertical bar about 4 inches across that looks darker than the rest of the picture. I also noticed images burning in everywhere except that bar. I know it's a lot of issues but any help would be appreciated.


This problems are a very tipical of the coded pixels on the LCD screen panel passes through the board that call the T-CON decoder board to causing this problems.Vertical colors lines display on the LCD screen panel happen by itself.Yes.The T-CON deco ... LG 32LE5300 Widescreen 32 in. HDTV

My Proview RX series LCD television is not responding to 'clicker'. (of course we first changed batteries to brand new ones.... not the problem) then something happened that's never occurred. It has a short memo on the screen that it is debugging itself. This has remained on the screen now for several hours with no progress. Do you have any advice. It IS connected to a DVD player that has not been any problem before. It is not connected to broadcast tv connection, cable or to internet.


Good day!Try to reset the power of the TV and DVD.Unplug it and after 30 minutes plug-in both TV and DVD to discharged the unit.Thank you. ... Proview PA-37JK1A 37 in. LCD Television

The screen displays just fine for about 5 minutes then just goes to a few squiggly vertical lines. If I turn it off and wait then turn it on it works for another 5 minutes.


... Tatung V20KQDX 20.1 in. LCD Television

Right third of screen develops vertically lines after about an hour or two of being on. I can turn it off and clear the problem up for several minutes, or it may not come back for a while. It looks like a sync issue on the right side of the screen. Any ideas? The TV is about 2.5-3 years old. Model 52RV53U


Hi:\012this problem may be due to a faulty T-Con board, replace the board and the issue should be resolved. ... Toshiba REGZA 52RV530U LCD TV

Hi, I recently tried to change the region code by opening the tray of the DVD and typing in a sequence of codes I found online. Now I am unable to play any DVD's it just gives me a blank blue screen.


You may have been "pranked" into wiping your DVD players EEPROM, making it unusable.\015\012\015\012A factory repair center might be able to fix it, unless you intentionally changed your region code more than twice, or were pranked into d ... Flat Panel Televisions

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.2010 seconds