Having problems with your Flat Panel Televisions ?

Where can I buy parts for my Norcent 3222? The picture is gone but sound is good. I may need a board or bulb, but don't know where to purchase. Thank you!



Answers :

Repair Help & Product Troubleshooting for Flat Panel Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

Where can I buy parts for my Norcent 3222? The picture is gone but sound is good. I may need a board or bulb, but don't know where to purchase. Thank you!


... Norcent Technologies LT-3222 32 in. LCD Television

Hi, I have searched all over internet and I think you are the only one who may exactly know whats the problem. I have a Toshiba Regza 37" which has no picture but sounds works perfect. The thing is if you really focus the picture is there but its too dull and dark to see it properly. Ive heard something about switching T-Con board.. please let me know which one of the boards is that(any sign or specific connection?) and where can I buy one? Thank you very much and best regards kamran


If you can see an image and it's OK - no distortions or corruption - then it's not an image problem, it's a backlighting problem. This means that the faulty part is not the T-con or any other board that works on the image, it's the inverter - the bo ... Flat Panel Televisions

Have sound but no picture. Need to replace the light proection bulb, but do not know how to order one and what part number I am ordering. Please advise. I am sure that you know what I need without me ripping apart the back of my T.V.! Thank you


Plasma sets DO NOT have lamps in them. I highly recommend you call a reputable service company do diagnose it properly. They can be very costly to repair. ... RCA P42WHD33 42 in. Plasma HDTV

My Samsung DLP HLT5075S tv wont turn on. It trys to start up makes all the usual sounds but no picture. It tries to start 3 times then it stops and the 3 led lights on the Rt side just blink. I took the lamp out and looked at it and it looks fine. I dont know if you can tell by looking at the bulb if its bad or not. Don't want to spend $100 on a new bulb without being sure its bad. Is there anyway to check the bulb?


... Samsung DLP HL-P5663W 56" TV

My Sony flat panel color tv ke-42ts2 trusurround by SRS has no picture but sound. I believe I need a new logic board or Zsustain board & Xsustain board. Does anyone know how much it will be to get it fix???


... Flat Panel Televisions

I have a toshiba tv and I dont know what i did with the book that came with it with the code. I have a panasonic surround sound with the remote that I need to reput the code in so the remote can be universal. Can you send the code I need to put in? Thank you


Please check the following link, there you can download the user guide for your Panasonic system:\015\012http://service.us.panasonic.com/operman/ ... Toshiba Flat Panel Televisions

I want to know the especificacions of the 5 diodes and 10 mosfet from the samsung y sus board hps5033x/xaa I get the 10 mosfets but I dont know the 5 diodes or were can i get the kit the 10 mosfet are ta50n28t i just need the reference of the zeners


... Samsung HP-T5044 50 in. Plasma TV

I ahve a ox pro series projector, i dont know wich one as it was given to me with no paperwork. i need to know how to replace the bulb and clean the inside f the lwns as it has a lot of dust that shows as black dots on the screen. ( yes the dust is inside)


... Flat Panel Televisions

Da32m36 I have several blown components on a circuit board in the 'primary power' region of the board. As the components ion the baord only have what the part would be in a Bill of Materials (eg R6102 for a resistor) I don't know what the actual part is so that I may replace the blown components. A sevice manual or circuit diagram is what I need indicating what the parts are.


... Standard (CRT) Televisions

My mitsubishi ws-65513 picture makes a pop noise then goes out with the sound but can still see video source info on corner of screen. then i have to turn tv off wait a couple of seconds then back on then tv will work for a shourt time before picture goes out again. i have looked at the four caps on the Dm board they dont look faulty or bulging but dont know if that is the problem


... Mitsubishi WS-65513 65" Rear Projection HDTV

For welcomejee I have a Sharp TU-GD10U-T with at bad DC-DC converter board RDENCA089WJZZ. I'm an hardware EE, which means I may be able to repair it. I need the schematics or repair manual. Do you know how I can get them? Thanks, John


... Flat Panel Televisions

Picture with no sound on Samsung LNS-4692DX. Samsung was of NO help. I followed the excellent instructions posted by fun2 and Ida2 but I did not prepoerly remove one of two orange ribbons on the T-Conn board and when I installed the new Tconn, the right half side of the screen has a green tint that distorts the picture badly. The left side is fine. My questions is does anyone know if I need a new orange ribbon and if so, how do I replace the old one at both ends? Otherwise, is the ribbon fixable


... Samsung LN-S4692D 46 in. LCD HDTV

Sony kp-46v15 convergence problem dont know were to start on adjusting main convergence board in front were do i start there is 15 or so red green blue ajustments for horizontal and the same for vertical need help in understanding were to start


Do not mess with those, they don't just go out. they are also for skew linearity, heighth, width for vertical and horizontal adjustments. If your convergence went out need to find convergence circuit and look on the plugs for your vcc voltages goin ... Sony KP-46V35 TV

I have a lg42pc3d plasma tv. its about 5 yrs old has worked just fine till last night the picture went out. Sound works but no picture. Have been on line and the consensus seems to be the x and/or z sustain boards and maybe also the control panel. Wanting to know if that is the problem and how do i check. Where are the best places to find the parts i need and the part numbers? thx


Yes usually the x and y sustain boards go. Not always with both fail, but they communicate with eachother...this is why replacing both is "good practice." You can check shopjimmy, ebay and encompass parts for parts online. Just order new replacements ... LG 42PC3D 42 in. Plasma Television

I have a baird x47dtv and we turned it on today but had no picture or sound. the blue power light comes on and flickers as it should on startup of tv,however we are still not recieving a picture. i have replaced the psu's approx 6 months ago so i know theres no problems there,but am unsure which part i need to replace as it could be 1 of three things. 1 it could be the main board, 2 it could be the power invertors or 3 the screen. any tips would be helpful


Tried to disconnect first the supply voltage of the inverter board and then turn on the tv. if the indicator stay which mean the inverter board would be the cause of shut off or the tv turn to safety mode. ... Flat Panel Televisions

I have a LT 40134 Mitsubishi LCD Tv with colored vertical lines on half of the screen. im trying to find the location of the t con board. the pictures online dont seem to match what i am seeing. anyone may know where its located?


... Mitsubishi LT-40134 40 in. HD-Ready LCD Television

My HDMI inputs dont work on my VIZIO gv47L FHDTV10A what board do i need to replace


Most likely you will need to replace the main board. That model # uses several different main boards. The part # will be listed on the board. Make sure you order the exact part # of your old board. ... Flat Panel Televisions

I have a Samsung DLP TV (model HLT5076S). When you turn it on there is no picture for several minutes (5-10 minutes) and then there is no sound once the picture comes on. You need to turn the TV back off & then restart it to get both picture and sound. Sometimes you need to do this several times before the TV turns on, you hear a click, and then you get picture & sound. It seems like it is waiting for something to warm up? The problem is not the bulb (fairly new) or with the electrical outl


This is because the CRT that is the cathode tube ray oscillator is taking time to warm up ... Samsung HL-T5076S 50 in. TV

Lost sound MAGNAVOX 19MF338B .. Trying to repair the board for a sound issue, For some reason no matter what plug-in i use the tv has no sound. I checked the board pretty good and even replaced 1 capacitor and with no luck. Need Help


... SNK Magnavox 19MF338B/27 19 in. LCD TV

I need to replace a Diode on the Power Supply Board for my HLT6156W Samsung DLP,the part number of the board is BP44-01002C the location of the Diode on the board is marked D805.I need to know specs of that diode ao a part number.Thanks Bob


... Flat Panel Televisions

I have a Panasonic Plazma TV, TH-46pz80u is the Model Number and the LED light blinks 8 times. I just need to know which certain board to replace. I have already opened the back of the tv to inspect where each board is mounted. I am having trouble getting the details just for my model type. I am aware that alot of the tv's share the same boards. I just need a little more guidance and I would like to get the troubleshooting spec manuals to refer to for this repair.


Hello,The power supply board is dead, do you know basic electronics' and soldering? Most of the times, the power supply board just have dead leakages gases capacitors.These capacitors always bulges up on it top,or puff up on it top.Replac ... Panasonic Viera TH-42PZ80U Plasma TV

Samsung dlp hls4666wx TV. After a power surge, my TV shuts off after about 4 minutes. The stand by, TV, timer lights flash...manual says it's the bulb or fan. Only, I bought a new bulb, and noticed both fans are working. Still does it. It makes a small pop them hiss or buzz sound when it offers the bulb down. The power supply and ballast look ok (circuit boards). Perfect picture and sound before shutting down. I've heard there are 3 fans but only see two. Could it be another fan I don't see? Or


... Projection Televisions

Which board on the Hitachi P42H401 controls the HDMI inputs. I need to replace that board and need to know which one it is?


... Hitachi P42H401 42 in. Plasma HDTV

I do not have cable or anything. I need to know what I need to get to get my local channels on my Vizio flat screen. I tried hooking up an antenna but I do a scan and get nothing. I dont know hat to do, Im tired of watching netflix.


... Vizio M220VA 22 in. LCD HDTV

Changed the main digital board it was the same they told me on the tuners there is a number it should match the original one like my original is n7hf but i dont know if somebodey changed it before i change the board twice it was the same problem. now my question is if the tuner number is different what problem does and how iam gonna know what was the original number on it


If the part number and revision version match , then you can forget about everything else. The part number will be printed on the board itself or it will be on a small label on the board. Post all the numbers you see on both boards(the board that you ... Sanyo DP32746 32 in. LCD Television

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1838 seconds