Having problems with your Flat Panel Televisions ?

In the process of my move, lost my Niko power cord to my OTP-2011-R flat screen. When the cable man tried to hook up my cable connection he used a universal power cord. Although we were able to get sound, there was absolutely no picture. The day before my move, the TV was working perfectly. Is the problem in the universal cord connection or in the TV? Niko seems to be out of business as all of the phone numbers for that company have been disconnected. Is there someplace I can buy a power



Answers :

Using a different AC cord did not hurt your TV. Something more than likely happened internally during your move.

Repair Help & Product Troubleshooting for Flat Panel Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

In the process of my move, lost my Niko power cord to my OTP-2011-R flat screen. When the cable man tried to hook up my cable connection he used a universal power cord. Although we were able to get sound, there was absolutely no picture. The day before my move, the TV was working perfectly. Is the problem in the universal cord connection or in the TV? Niko seems to be out of business as all of the phone numbers for that company have been disconnected. Is there someplace I can buy a power


Using a different AC cord did not hurt your TV. Something more than likely happened internally during your move. ... Niko Flat Panel Televisions

I have a Jenson JE 3211 TV in my motorhome that I just purchased the head phones are radio shack (09A08) there are four red leds on the front these led's are on when pluged in to the power source.. There is a power cord and a recharcing cord also either a yelow and red plug or a single plack plug that goes to the TV. I have pluged into everything on the TV without results. The TV is connected to park cable and working fine.


... Flat Panel Televisions

The TV doesn't power up anymore - i've checked the cord connection, made sure the power switch is in the "on" position, etc. basically ran through all the possible troubleshooting solutions. the little amber power indicator doesn't even light up anymore so it seems there no power registering into the unit at all (i've checked the outlet too). any suggestions?


... Maxent MX-26X3 Television

I have LG 32LD330H Flat screen TV which goes off after powering. You touch at the back or tilt to check power cable at the back, it comes on but goes after a while. Power cord well connected and firm. What could be the issue?


... LG 32LD330H

My Aeros 850 Universal Remote will not change the channels with my Samsung TV. This just happened - my modem was reset and it seemed to happen after that. How do I reset my universal remote to connect with the cable box?


... Flat Panel Televisions

I have a Vizio VA370M. My problem is that the vizio's logo stays on screen and none button of the tv or the remote control responde, it seems to be a problem with the lcd controller because at first i noticed that the cable that goes to the screen was a little loose and then it works ok but now it does the same thing again. I also tried disconnect the power cord and wait for some time to reset the tv but it not seems to work. The image looks great but again...the logo is still on screen and t


... Vizio VA370M 37 in. TV

I have a URC 1056 Universal remote Control device which came bundled with a Digital Box (Set top) from Rogers Cable. (Cisco Explorer 8642HD). The Universal Remote should be able to control my DVD player, a Panasonic SC-HT75. With the help of the info at http://www.urcsupport.com/html.php?page_id=382, I identified the code for the DVD Player to be 0703. Now programmed to control the DVD player, the URC can start or stop a DVD from playing, but doesn't seem to be able to Power the DVD p


... Flat Panel Televisions

I have a problem using a VGA cable to connect a laptop to my Insignia 32 LCD TV (model NS-32E570A11). I have found that the TV will power-on but "freeze" if I have a VGA cable connected to the back of the TV (regardless of whether the other end is connected to the PC laptop or not. The laptop is an Acer Aspire One D255. By freeze I mean power light is blue, but no display, no response on remote or side buttons and this requires the power cable to be disconnected, the VGA cable disconne


There might be some garbage in the monitor processor, so unplug it from the wall for 40 min. and that should reset it back to normal. ... Insignia IS-LCDTV32 32 in. Television

The coax input on my tv is broken off how can I connect the cable to it other than the red white and yellow cords which don't have a good connection either I have my dvd player hooked up to hdmi is there a way to hook the cable up using the hdmi cord without a cable box just the line.


Hi, unfortunately the only ways to get the signal to the tv is with either coaxial, the red white and yellow rca cords, or hdmi and also the " RGB " inputs, also called "component video input ". some dvd players have component video outs-that could ... Samsung Flat Panel Televisions

I relocated to another state and I have a Sansui HDLCD1908 tv, I have this extra power cord I'm assuming it connects to the tv, all the other cords to all the other electronics are accounted for and connected. If this cord connects to the tv where does it connect to? Thnak You


It will connect in the back of the TV. You will see a female socket under the lip of the RCA connections and RF connectors. This power cord is just like the computer power cord you already use! Thanks for asking and show a few hands of support! ... Sansui HDLCD1908 19 in. LCD TV

Coax cable/antenna connection doesn't seem to work. It says "no input signal" although the cable works when plugged into other tv's. Other connections such as HDMI seem to be working fine. Trying to set up basic cable without a box. Getting frustrated.


... Westinghouse LTV-32w1 32 in. HD-Ready LCD Television

Recently my benq mp620p projector stop working. When I connect the power cord the power button lights up green and the power led orange as usually. When I push the power button, it starts to blink in green, the filter wheel starts to spin and the lamp starts to warm up with some light comming out. Few seconds after, the fans start, the power led becomes solid green and the lamps goes of. I can't do anything else since that other than unplug the power cord. No response to any button. Any help?


I'm assuming that you have checked the bulb and it appears ok. Either the inverter/ ballast board has a fault or , much more likely, the control board is no longer capable of finishing the loading of the firmware. This is usually caused by the failur ... Flat Panel Televisions

Hi-rn Thank you for being here- We were watching our Sharp Flat Screened TV, beautiful nice picture. We noticed when we hooked the cable up for Direct TV in our new home, the input connection point was bent and slightly loose. We attached the cable and everything seemed fine. Tried to move it back to the wall and the picture became distored w/ snow and it's saying 'analog' on the screen. Is there another way to connect it to the cable other than that particular connection point until we ca


With Direct TV, you should use the video input (composite video- yellow/picture, red/right stereo, white/left stereo)ORcomponent video- (green/video, blue/video,red/video white/left channel stereo, red/right channel stereo)t ... Sharp Flat Panel Televisions

NEC PXT42SPKR Hi, I am trying to find a power cord for an NEC tv model number PXT42SPKR. I don't know how old the tv is, my husband moved house before we were married and now can't find the power cable for it. Is it possible to buy a generic cable of the right voltage if you can no longer get an original cable, and if so what voltage cable and what type of pin would it be?


... Flat Panel Televisions

Panasonic model th-42px75u: heavy thunder and lightning must have created a power surge. both hdmi ports on my tv do not work now as there is a blank screen. coax works. cable box, xbox 360, hdmi cables all work on my other tv (LG). could th hdmi port been fried? if so, how do i fix? or do i just buy a new tv? i had a protective power surge connected to all tv and entertainment power sources. much appreciated.


... Panasonic Viera TH-42PX80U Plasma TV

My son trip over the cable cord and pulled out the cable connector, were you connect the cable cord.


Using a wire cutting tool, cut and remove the outer sheath of the coaxial cable approximately 1/2-inch down from the en ... Flat Panel Televisions

I have a Dynex Bluray Player and when I connect it with AV Cable it shows Dynex DVD Bluray Player Details and works then once I place a dvd inside play it and after a while stop it, it then switches off and when I power back on it powers button light up blue but no picture on TV..Is it the AV Cable or the Player? And the Player is in New Condition with Remote and Manual!


... Dynex 32 in. LCD Flat-Panel HDTV

My LG 60PZ550 Plasma HDTV turns on sporadically when connected to my U-Verse STB via HDMI cable. This does NOT occur when the STB is either disconnected from the panel, or when connected to the panel with component video cables. No other HDMI device (ie: Blu-Ray player, DVD player, HTiB) seems to exhibit this issue with the panel, only the U-Verse STB. Any suggestions?


Reset the uverse box. try resolution output settings from box. reseat the hdmi with tv and box. ... Flat Panel Televisions

Hi Viewsonic, I have a N3751w ViewSonic LCD TV Model Number: VS11405-1M I am having a problem with changing the source. The TV will only remain on the TV setting which only allows me to use cable. I can not use any other device that is connected to the TV. The little source window shows up from time to time on the TV screen when I have not pressed anything on the remote. I can not turn off the power to the TV without disconnecting the power from the electric connection. HELP HELP HELP!!


Hi, well unfortunately there is no Reset Button as such, the TV is reset in the basic sense when turned OFF and completely so when removed from the Supply, ie: Withdraw the plug from the socket. \015\012Now if this doesn't work, then most likely you ... ViewSonic N3751W 37 in. LCD Television

I have an ILO - 32HD Television but the cable cord that comes from the wall does not have a place on the TV to connect to. There is an indentation labeled ANT in the shape of a USB port which it isn't, just shaped like one. How can this TV be hooked up to my cable service? Is my only choice to use the colored yellow, red, and white cords? If so, that is too bad because that means I can't hook up any other devices such as a DVD to the TV (without constantly interchanging them).


Your TV comes with HDMI, DVI, Component In and S video in. Since it has no Tuner built in you will have to use a Set Top box with either component out or if you buy an HD Set Top box with HDMI out. The later will be in your favor so that you can use ... iLO 3200 32 in. LCD Television

I have the WD-65731 DLP HDTV. The tv will not turn on. Initially, it will power up, and you can here the fan running. The green "timer" light will blink for several seconds. Finally the fan will turn off and the blinking timer light will go out. I have tried resetting the TV, as well as unplugging the power cord and all input cords. After waiting 60 seconds, I reconnected all cables and tried again to turn it on, but the result was the same. No other indicator lights are on during ths process


Have you replaced the lamp?? You usually have to replace the lamps around every two to three years. The manufacturer has designed it so you the customer could change it yourself without a technicion. Hope this helps. ... Mitsubishi WD-65731 65" HDTV

Hello, I have a Panasonic DMP BD 601 Bluray player with Viera Cast. I can't get it to connect to the internet although the cables seem to be set up correctly. I also want to know if, once connected, it will be able to connect and stream movies from Netflix (which is the reason I want to connect the player to the internet); I have read elsewhere that this particular player doesn't support streaming movies on Netflix. Thank you very much in advance for any help you can give me, Marc


... Panasonic Flat Panel Televisions

I have a sharp lc-42SB45UT flat screen that after a thunderstorm will not turn on any more. Now I am pretty tech savy, and here's what I've done. Checked cable and receptacle and both are good. Taken off back cover and checked fuse, also good. The voltages on the power card seem correct by my multimeter so power is being applied, but the power on led is not lit. Any suggestions?


You are on the right track--follow the voltages--set has a standby power supply--right at or part of main supply---runs 7/24 so likely was damaged.likely you will find a open somewhere between where power AC enters set and the bridge rectifie ... Sharp Flat Panel Televisions

My new PS3 wont seem to connect to either audio or video connections? is there a general problem with this tv model? i tried both the R/L audio's and for the yellow cable i tried that in all of the top "Y, AV, Cr, Cb" connections below the tv outlet. Im no expert in what these are for, Im used to the standard red-white-yellow....hence the confusion.


The RED/WHITE (AUDIO RIGHT and LEFT), and the Yellow (Composite video) should go into the TV Video input signal AV1 or AV2. You should try feeding the TV with DVD player using the same cable to find out if it is the TV problem or the PS3 output signa ... ViewSonic N2750w 27 in. HD-Ready LCD Television

Our Memorex model #MVDT2002B, SH 067460905582A, was working fine. There was a short power outage in town during the work day. When we came home, the TV wouldn't power up. The cable box had reset just fine. We upluged and plugged back in, but nothing happened. We plugged a different, older TV into the same power source and that worked fine. Is there a reset button? We can't seem to find one. Also, we can't find our manual. Thank you, Janet and Brian


Hello\015\012There is a protection fuse inside your tV, which can be located at the power regulator section, to which the main power cable enters to the board. It is a class cartridge type, and can be replaced. Check it first. If found blown ... Memorex MVDT2002 20" TV

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1865 seconds